Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM E607-02

Отменен
Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere — 9 стр.
Причина отмены

This test method covers the spectrochemical analysis of aluminum and aluminum alloys.

Formerly under the jurisdiction of Committee E01 on Analytical Chemistry for Metals, Ores and Related Materials, this test method was withdrawn in May 2011.

Значение и использование

This test method is suitable for manufacturing control, for material or product acceptance, and for research and development. Its use over several years has shown precision and accuracy that are well within expected levels.

It is assumed that all who use this test method will be trained analysts capable of performing laboratory procedures skillfully and safely, and that the work will be performed in a properly equipped laboratory.

Область применения

1.1 This test method covers the spectrochemical analysis of aluminum and aluminum alloys for the following elements in the concentration ranges indicated:

ElementConcentration Range, %Silicon0.001 to 23.0Copper0.001 to 20.0Magnesium0.001 to 11.0Zinc0.001 to 10.0Tin0.001 to 7.5Nickel0.001 to 4.0Iron0.001 to 3.0Lithium0.0001 to 3.0Cobalt0.001 to 2.0Manganese0.001 to 2.0Chromium0.001 to 1.0Silver0.001 to 1.0Zirconium0.001 to 1.0Lead0.002 to 0.7Bismuth0.001 to 0.7Cadmium0.001 to 0.5Titanium0.001 to 0.5Beryllium0.0001 to 0.5Vanadium0.001 to 0.15Calcium0.001 to 0.05Gallium0.001 to 0.05Boron0.0001 to 0.05Sodium0.0001 to 0.05

1.2 The test method is applicable primarily to the control analysis of chill-cast samples. Other forms may be analyzed, provided that (1) they are sufficiently massive to prevent undue heating; (2) they permit machining flat surfaces having a minimum dimension of approximately 30 by 30 mm (1.2 in. by 1.2 in.); and (3) reference materials of similar metallurgical condition and chemical composition are available.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ICS
77.120.10 Aluminium and aluminium alloys / Алюминий и алюминиевые сплавы
Сборник ASTM
03.05 Analytical Chemistry for Metals, Ores, and Related Materials / Аналитическая химия для металлов, руд и сопутствующих материалов: с E32 и далее
Тематика
Analytical Chemistry