Причина отмены This guide provides guidance for use of selected process wastes as structural fills by listing representative test methods for predicting and evaluating those physical characteristics of waste that are related to the integrity of fills and to protection of ground and surface waters.

Formerly under the jurisdiction of Committee D18 on Soil and Rock, this guide was withdrawn in January 2019 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

This practice is intended for inorganic process wastes that can be used as replacements for natural material such as soil or rock suitable for construction applications. Selection of appropriate and feasible fill materials and selection of applicable materials, tests, and specifications to facilitate construction and environmental protection are the responsibility of the design engineer. This practice is intended to encourage wider utilization of waste materials.

Область применения

1.1 This guide provides guidance for use of selected process wastes as structural fills by listing representative test methods for predicting and evaluating those physical characteristics of waste that are related to the integrity of fills and to protection of ground and surface waters.

1.2 Table 1 lists references which provide engineering practices and test procedures that may be applied to process waste for use as structural fill.

1.3 This guide includes approaches for the environmental assessment of process wastes prior to application.