Область применения

1.1 This consumer safety performance specification provides safety and performance standards for various types of public playground equipment. Its purpose is to reduce life-threatening and debilitating injuries.

1.2 The range of users encompassed by this consumer safety performance specification is the 5th percentile 2-year-old through the 95th percentile 12-year-old.

1.3 Home playground equipment, toys, amusement rides, sports equipment, fitness equipment intended for users over the age of 12, public use play equipment for children 6 to 24 months, and soft contained play equipment are not included in this specification.

1.4 Products or materials (site furnishings) that are installed outside the equipment use zone, such as benches, tables, independent shade structures, and borders used to contain protective surfacing, are not considered playground equipment and are not included in this specification.

1.5 This specification does not address accessibility, except as it pertains to safety issues not covered in the DOJ 2010 Standard for Accessible Design.

1.6 This consumer safety performance specification includes the following sections:

Title
Section Number
Scope1 Referenced Documents2 Terminology3 Materials and Manufacture4 General Requirements5 Performance Requirements6 Requirements for Access/Egress7 Equipment8 Playground Layout9 Accessibility10 Installation11 Structural Integrity12 Maintenance13 Labeling14 Information Signage and Labels15 Keywords16 FiguresAnnex A1

1.7 General Measures, Tolerances, and Conversions:

1.7.1 The general tolerances for this specification (unless otherwise specified) are as follows:

DimensionTolerance X in.±0.5 in. X.X in.±0.05 in. X.XX in.±0.005 in.

These tolerances still apply to a dimension even when terms like greater than, less than, minimum, or maximum are used.

1.7.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only.

1.7.3 The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 0.45359 kg.

1.7.4 See Annex A1 for figures referenced throughout this specification.

1.7.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.