Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM F1672-95(2005)

Заменен
Standard Specification for Resurfacing Patellar Prosthesis — 5 стр.
Реферат

This specification covers the basic material descriptions, device geometry (axisymmetric and nonsymmetric), and in-vivo performance characteristics of patellar resurfacing prosthetic devices used to provide a functioning articulation between the bones of the patella and the femur. This specification does not cover the details for quality assurance, design control, and production control contained in 21 CFR 820 and ISO 9001. All devices conforming to this specification shall be fabricated from materials with adequate mechanical strength and durability, corrosion resistance, and biocompatibility. In the evaluation of their safety and efficacy, patella prosthesis shall adhere to the minimum acceptance criteria specified for the following failure modes: dislocation or laterial subluxation; component disassociation; fixation failure; device fracture; and articular surface wear.

Область применения

1.1 This specification covers patellar resurfacing devices used to provide a functioning articulation between the bones of the patella and the femur.

1.2 This specification is intended to provide basic descriptions of material and device geometry. Additionally, those characteristics determined to be important to in-vivo performance of the device are defined.

1.3 This specification does not cover the details for quality assurance, design control, and production control contained in 21 CFR 820 and ISO 9001. Note 1Devices for custom applications are not covered by this specification.

ICS
11.040.40 Implants. Including pacemakers / Имплантаты для хирургии, протезирования и ортоптики. Включая кардиостимуляторы
Сборник ASTM
13.01 Medical and Surgical Materials and Devices (I): E667 – F2477 / Медицинские и хирургические материалы и приборы (I): E667 - F2477
Тематика
Medical Devices & Implants