Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM F2403-09

Отменен
Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength (Withdrawn 2016) — 4 стр.
Причина отмены This specification covers the requirements for non-heat treated carbon steel machine screws with nominal diameters of No. 0000 through 3/4 in. having a minimum ultimate tensile strength of 60 000 psi.

Formerly under the jurisdiction of Committee F16 on Fasteners, this specification was withdrawn in September 2016. This standard is being withdrawn with no replacement because it is redundant.

Реферат

This specification covers the requirements for non-heat treated carbon steel machine screws. Steel for the machine screws shall be made by open-hearth, basic-oxygen, or electric-furnace process and the screws shall be manufactured by cold forming, thread rolling, and stress-relieve annealing. Heat and product analysis shall be performed to determine the chemical composition of the specimen conforming to the requirements for carbon, phosphorus, and sulfur. Specimens shall be subjected to mechanical tests to verify conformance to the mechanical property requirements such as tensile strength, Rockwell hardness, and ductility.

Область применения

1.1 This specification covers the requirements for non-heat treated carbon steel machine screws with nominal diameters of No. 0000 through ¾ in. having a minimum ultimate tensile strength of 60 000 psi.

1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

ICS
21.060.10 Bolts, screws, studs / Болты, винты, шпильки
Сборник ASTM
01.09 Fasteners; Rolling Element Bearings / Крепежные изделия, Роликовые подшипники
Тематика
Fasteners