Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM F2718-09(2015)

Отменен
Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines (Withdrawn 2022) — 4 стр.
Причина отмены This specification covers requirements and test methods for materials for a semi-structural polyethylene (PE) encapsulated cement mortar formed-in-place liner system (FIPLS) intended for the rehabilitation of water pipelines of nominal size 4 in. to 12 in. This renewal process involves installing a collapsed PE liner, folded at the time of insertion, into an existing pipeline, expanding the PE liner, and then pumping cement mortar into the annulus between the liner and the main.

Formerly under the jurisdiction of Committee F17 on Plastic Piping Systems, this specification was withdrawn in July 2022. This standard is being withdrawn without replacement due to its limited use by industry.

Реферат

This specification covers requirements and test methods for materials for a semi-structural polyethylene (PE) encapsulated cement mortar formed-in-place liner system (FIPLS) intended for the rehabilitation of water pipelines. The liner and cement mortar are progressively rounded by means of an air pressure propelled pig and expanded against the interior surface of the original host pipe. After rounding, the line is maintained under pressure until the cement mortar cures and the liner is completely self supporting. The liner and the hooks shall be made from PE material meeting the minimum physical properties. The cement mortar is used to fill the ring cavity between the polyethylene liner and the host pipe. The cement mortar shall have the minimum physical properties.

Область применения

1.1 This specification covers requirements and test methods for materials for a semi-structural polyethylene (PE) encapsulated cement mortar formed-in-place liner system (FIPLS) intended for the rehabilitation of water pipelines of nominal size 4 in. to 12 in. This renewal process involves installing a collapsed PE liner, folded at the time of insertion, into an existing pipeline, expanding the PE liner, and then pumping cement mortar into the annulus between the liner and the main.

1.2 The liner and cement mortar are progressively rounded by means of an air pressure propelled pig and expanded against the interior surface of the original host pipe. After rounding, the line is maintained under pressure until the cement mortar cures and the liner is completely self supporting.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.5 There is no similar or equivalent ISO standard.

ICS
91.100.10 Cement. Gypsum. Lime. Mortar / Цемент. Гипс. Известь. Строительный раствор
Сборник ASTM
08.04 Plastic Piping Systems (I): D1598 – F2735 / Пластиковые трубопроводные системы (I): D1598 – F2735
Тематика
Plastic Pipe