Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM F2734-08

Отменен
Standard Practice for Testing the Shelf Life of Ink Jet Printer Cartridges (Withdrawn 2016) — 3 стр.
Причина отмены This practice describes a practical procedure to help determine the shelf life confidence of a sample ink jet cartridge in a short period of time. This practice uses an accelerated aging test based on the Arrhenius principle which states that for every 10°C increase in temperature there is, approximately, a two times rate increase of a chemical reaction.

Formerly under the jurisdiction of Committee F05 on Business Imaging Products, this practice was withdrawn in May 2016 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

This practice can be used to determine the stability and performance of ink jet ink when exposed to elevated temperatures in an ink jet cartridge.

This practice can be used for the evaluation of an OEM or other reference ink jet cartridge compared to a corresponding remanufactured, or refilled, or other sample ink jet printer cartridge.

This practice is applicable to all ink jet cartridges, whether single or multicolor.

This practice can be used to assess design goals of manufacturers of ink jet printer cartridges for ink capability, ink filling, and packaging effectiveness.

This practice may be used for research and development, and for quality acceptance evaluation.

Область применения

1.1 This practice describes a practical procedure to help determine the shelf life confidence of a sample ink jet cartridge in a short period of time. This practice uses an accelerated aging test based on the Arrhenius principle which states that for every 10°C increase in temperature there is, approximately, a two times rate increase of a chemical reaction.

1.2 This practice consists of comparing the ability of an ink jet cartridge to print after exposure to elevated temperature as compared to a reference ink jet cartridge, such as an OEM (original equipment manufacturer) ink jet cartridge.

1.3 This practice can be used to evaluate the effectiveness of the overall production of remanufactured or refilled ink jet cartridges.

1.4 To confirm the results of accelerated aging, real-time aging should also be conducted.

1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

ICS
37.100.20 Materials for graphic technology / Материалы для графической техники
Сборник ASTM
15.11 Consumer Products; Business Imaging Products; Vacuum Cleaners / Потребительские товары; Имиджевая бизнес-продукция; Уборочные машины вакуумного действия
Тематика
Business Copy Products