Formerly under the jurisdiction of Committee F05 on Business Imaging Products, this practice was withdrawn in June 2017 in accordance with Section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Dry toners for use in electrostatic copiers and printers are normally free-flowing powders at room temperatures. They are often formulated to fuse at elevated temperatures as part of the electrostatic printing and copying process. The specific temperature at which fusing takes place has implications of premature change in the physical characteristics of a given toner, defined as blocking or caking. This is undesirable, but can result when the dry toner is subjected to temperatures in the range of its fusing point during conditions of transport, storage, or local handling; as well as to the environmental parameters in a given location after the product is introduced and held for use in the machine reservoir itself.

1.1 This practice covers the determination of the temperature at which a dry toner will cake as storage temperatures are raised.

1.2 In certain cases the effects of pressure or pressure combined with heat can cause blocking and caking of a dry toner. This recommended practice does not provide for evaluation of such pressure effects.

1.3 This practice consists of testing samples at controlled temperatures and evaluating them for any sign of blocking after a specified period.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.