This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Fabric produced from three classes of wire coatings are covered as follows: Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2a consists of polymer coating extruded and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire; Class 2b consists of polymer coating fused and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire. Materials shall be tested and the individual grades shall conform to material, weave, mesh size, diamond count, wire size, fabric height, selvage, breaking strength, weight of Zinc, Aluminum, or Zinc-5 % Aluminum-Mischmetal Alloy Coatings, polymer coating thickness, polymer-coated wire, and roll length.

1.1 This specification covers polyvinyl chloride and other conforming organic polymer-coated steel chain-link fabric, coated before weaving. Polyvinyl chloride, polyolefin, and other organic polymer coating hereinafter will be designated as polymer coating.

1.2 Fabric produced from three classes of wire coatings are covered as follows:

1.2.1 Class I consists of polymer coatings extruded over zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.

1.2.2 Class 2a consists of polymer coating extruded and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.

1.2.3 Class 2b consists of polymer coating fused and adhered to zinc-coated, aluminum-coated, or zinc-5 % aluminum-mischmetal alloy-coated steel wire.

1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.