Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru

ASTM G190-06

Заменен
Standard Guide for Developing and Selecting Wear Tests (Withdrawn 2015) — 5 стр.
Причина отмены

This guide covered general information for the development and selection of a wear test for an intended application.

Formerly under the jurisdiction of Committee G02 on Wear and Erosion, this guide was withdrawn in January 2015 in accordance with section 10.5.3.1 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.

Значение и использование

The guidance and methodology provided by this guide is applicable for any wear situation and is not limited to material or lubrication. This guide is intended to provide general information and guidance regarding the selection and development of a wear test and does not provide specifics about any one wear test or intended application. In general the variability and correlation that is obtained with any wear test is determined by the degree to which the various elements of the wear test methodology described in this guide are followed.

Область применения

1.1 This guide covers general information for the development and selection of a wear test for an intended application.

ICS
19.020 Test conditions and procedures in general / Условия и методика испытаний в целом
Сборник ASTM
03.02 Corrosion of Metals; Wear and Erosion / Коррозия металлов; Износ и разрушение (эрозия) металлов
Тематика
Corrosion & Wear