BS A 401-420:2015

Действует

Specification for screws, pan and 100$0D countersunk head, hexalobular drive recess (unified threads below $9D inch) in various materials — 36 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

BS L 168:1978

Действует

Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) — 8 стр.

BS L 102:1971

Действует

Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) — 8 стр.

BS 6338:1982

Действует

Specification for chromate conversion coatings on electroplated zinc and cadmium coatings — 8 стр.

BS 1872:1984

Действует

Specification for electroplated coatings of tin — 16 стр.

ASME B18.6.3-2013

Действует

Machine Screws, Tapping Screws, and Metallic Drive Screws (Inch Series) (B18.6.3 - 2013) — 140 стр.

BS 1580-3:2007

Действует

Unified screw threads, Screw threads with diameters below $9D in. Requirements — 24 стр.

BS EN ISO 10664:2014

Действует

Hexalobular internal driving feature for bolts and screws — 16 стр.

BS A 273:1978

Действует

Specification for gauging practice for 100$0D countersunk head fasteners for flushness control — 8 стр.

BS EN ISO 898-1:2013

Действует

Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread — 64 стр.

BS 1473:1972

Действует

Specification for wrought aluminium and aluminium alloys for general engineering purposes - rivet, bolt and screw stock — 14 стр.

BS EN 12166:2016

Действует

Copper and copper alloys. Wire for general purposes — 46 стр.

BS EN 12164:2016

Действует

Copper and copper alloys. Rod for free machining purposes — 44 стр.

BS EN 12163:2016

Действует

Copper and copper alloys. Rod for general purposes — 50 стр.

BS EN 4826:2014

Действует

Aerospace series. Zinc-Nickel (12 %-16 % Ni) plating of steels with specified tensile strength $3L 1 450 MPa, copper alloys, nickel alloys and aluminium alloys for parts and fasteners — 16 стр.

BS EN 3911:2010

Действует

Aerospace series. Six lobe recess. Geometrical definition — 10 стр.

BS EN 2516:1997

Действует

Passivation of corrosion resisting steels and decontamination of nickel base alloys — 14 стр.

BS EN 23995:1993

Действует

Specification for metallic powders. Determination of green strength by transverse rupture of rectangular compacts — 16 стр.

BS EN 2398:2008

Действует

Aerospace series. Heat resisting steel FE-PA2601(X6NiCrTiMoV26-15). Rm $3M 900 MPa. Bars for machined bolts. D $3L 25 mm — 10 стр.

BS EN 2284:1991

Действует

Specification for sulfuric acid anodizing of aluminium and wrought aluminium alloys — 16 стр.

BS EN 2133:2010

Действует

Aerospace series. Cadmium plating of steels with specified tensile strength $3L 1450 MPa, copper, copper alloys and nickel alloys — 12 стр.

BS 1134:2010

Действует

Assessment of surface texture. Guidance and general information — 60 стр.

BS EN 2100:1992

Действует

Aluminium alloy AL-P2014A-T4511. Extruded bars and sections a or D $3L 200 mm — 12 стр.

BS EN 755-2:2016

Действует

Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties — 60 стр.

BS S 158:1977

Действует

Specification for 1% chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts — 6 стр.

BS S 154:1976

Действует

Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling section 150 mm) — 8 стр.

BS S 148:1969

Действует

Specification for low nickel-chromium steel (bar for the manufacture of forged bolts only) — 4 стр.

На этот документ ссылаются

BS 2W 11:1967

Действует

Specification for aircraft material. Preformed corrosion-resisting steel wire rope — 6 стр.

BS A 101:1969+A3:2012

Действует

Specification for general requirements for titanium bolts — 28 стр.