Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыBSI

BS EN 1090-2:2008

Действует
Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures — 208 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

BS EN 10017:2004
Действует
Steel rod for drawing and/or cold rolling. Dimensions and tolerances — 18 стр.
BS EN 10029:1991
Заменен
Specification for tolerances on dimensions, shape and mass for hot rolled steel plates 3 mm thick or above — 16 стр.
BS EN ISO 14814:2006
Действует
Road transport and traffic telematics. Automatic vehicle and equipment identification. Reference architecture and terminology — 24 стр.
BS EN ISO 3506-1:1998
Заменен
Mechanical properties of corrosion-resistant stainless-steel fasteners. Bolts, screws and studs — 32 стр.
BS EN ISO 3506-2:1998
Заменен
Mechanical properties of corrosion-resistant stainless-steel fasteners. Nuts — 26 стр.
BS EN ISO 6789:2003
Заменен
Assembly tools for screws and nuts. Hand torque tools. Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure — 26 стр.
BS EN ISO 7049:1995
Заменен
Cross recessed pan head tapping screws — 16 стр.
BS EN 10034:1993
Действует
Structural steel I and H sections. Tolerances on shape and dimensions — 12 стр.
BS EN ISO 10684:2004
Действует
Fasteners. Hot dip galvanized coatings — 30 стр.
BS EN ISO 15480:1999
Действует
Hexagon washer head drilling screws with tapping screw thread — 16 стр.
BS EN ISO 15976:2002
Действует
Closed end blind rivets with break pull mandrel and protruding head. St/St — 16 стр.
BS EN ISO 15979:2002
Действует
Open end blind rivets with break pull mandrel and protruding head. St/St — 16 стр.
BS EN ISO 15980:2002
Действует
Open end blind rivets with break pull mandrel and countersunk head. St/St — 16 стр.
BS EN 10048:1997
Действует
Hot rolled narrow steel strip. Tolerances on dimensions and shape — 26 стр.
BS EN ISO 15983:2002
Действует
Open end blind rivets with break pull mandrel and protruding head. A2/A2 — 16 стр.
BS EN ISO 15984:2002
Действует
Open end blind rivets with break pull mandrel and countersunk head. A2/A2 — 16 стр.
BS EN 10244-2:2009
Действует
Steel wire and wire products. Non-ferrous metallic coatings on steel wire. Zinc or zinc alloy coatings — 22 стр.
BS EN 10264-3:2002
Заменен
Steel wire and wire products. Steel wire for ropes. Round and shaped non alloyed steel wire for high duty applications — 20 стр.
BS EN 10264-4:2002
Заменен
Steel wire and wire products. Steel wire for ropes. Stainless steel wire — 12 стр.
BS EN 10051:2010
Действует
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape — 18 стр.
BS EN 12385-10:2003+A1:2008
Действует
Steel wire ropes. Safety. Spiral ropes for general structural applications — 28 стр.
BS EN 13411-4:2011
Действует
Terminations for steel wire ropes. Safety. Metal and resin socketing — 26 стр.
BS EN 1337-2:2004
Действует
Structural bearings. Sliding elements — 74 стр.
BS EN 1337-3:2005
Действует
Structural bearings. Elastomeric bearings — 98 стр.
BS EN 1337-4:2004
Действует
Structural bearings. Roller bearings — 34 стр.
BS EN 1337-5:2005
Действует
Structural bearings. Pot bearings — 60 стр.
BS EN 1337-6:2004
Действует
Structural bearings. Rocker bearings — 32 стр.
BS EN 1337-7:2004
Действует
Structural bearings. Spherical and cylindrical PTFE bearings — 28 стр.
BS EN 1337-8:2007
Действует
Structural bearings. Guide bearings and restraint bearings — 30 стр.
BS EN 10055:1996
Действует
Hot rolled steel equal flange tees with radiused root and toes. Dimensions and tolerances on shape and dimensions — 12 стр.
BS EN ISO 9013:2002
Заменен
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances — 36 стр.
BS EN 287-1:2011
Действует
Qualification test of welders. Fusion welding. Steels — 42 стр.
BS EN 1011-2:2001
Действует
Welding. Recommendations for welding of metallic materials. Arc welding of ferritic steels — 62 стр.
BS EN 1011-3:2000
Действует
Welding. Recommendations for welding of metallic materials. Arc welding of stainless steels — 32 стр.
BS EN 14180:2003+A2:2009
Заменен
Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing — 56 стр.
BS EN ISO 3834-1:2005
Действует
Quality requirements for fusion welding of metallic materials. Criteria for the selection of the appropriate level of quality requirements — 18 стр.
BS EN 10056-1:1999
Заменен
Specification for structural steel equal and unequal angles. Dimensions — 12 стр.
BS EN ISO 4063:2009
Заменен
Welding and allied processes. Nomenclature of processes and reference numbers — 32 стр.
BS EN ISO 5817:2007
Заменен
Welding. Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded). Quality levels for imperfections — 36 стр.
BS EN ISO 9692-1:2003
Заменен
Welding and allied processes. Recommendations for joint preparation. Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels — 26 стр.
BS EN ISO 9692-2:1998
Действует
Welding and allied processes. Joint preparation. Submerged arc welding of steels — 16 стр.
BS EN ISO 13916:1997
Заменен
Welding. Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature — 12 стр.
BS EN 10056-2:1993
Действует
Specification for structural steel equal and unequal angles. Tolerances on shape and dimensions — 12 стр.
BS EN ISO 14373:2007
Заменен
Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels — 26 стр.
BS EN ISO 14554-1:2001
Заменен
Quality requirements for welding. Resistance welding of metallic materials. Comprehensive quality requirements — 16 стр.
BS EN ISO 14555:2006
Заменен
Welding. Arc stud welding of metallic materials — 74 стр.
BS EN ISO 14731:2006
Действует
Welding coordination. Tasks and responsibilities — 22 стр.
BS EN ISO 15609-1:2004
Действует
Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding — 14 стр.
BS EN 10058:2003
Действует
Hot rolled flat steel bars for general purposes. Dimensions and tolerances on shape and dimensions — 14 стр.
BS EN ISO 15609-4:2009
Действует
Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Laser beam welding — 20 стр.
BS EN ISO 15609-5:2004
Заменен
Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Resistance welding — 18 стр.
BS EN ISO 15610:2003
Действует
Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables — 12 стр.
BS EN ISO 15611:2003
Действует
Specification and qualification of welding procedures for metallic materials. Qualification based on previous welding experience — 12 стр.
BS EN ISO 15612:2004
Заменен
Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure — 14 стр.
BS EN 10059:2003
Действует
Hot rolled square steel bars for general purposes. Dimensions and tolerances on shape and dimensions — 12 стр.
BS EN ISO 15613:2004
Действует
Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test — 12 стр.
BS EN ISO 15614-10:2005
Действует
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Hyperbaric dry welding — 20 стр.
BS EN ISO 15614-11:2002
Действует
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Electron and laser beam welding — 32 стр.
BS EN ISO 15614-13:2005
Заменен
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Resistance butt and flash welding — 26 стр.
BS EN ISO 15620:2000
Действует
Welding. Friction welding of metallic materials — 40 стр.
BS EN 10060:2003
Действует
Hot rolled round steel bars for general purposes. Dimensions and tolerances on shape and dimensions — 12 стр.
BS EN ISO 16432:2007
Действует
Resistance welding. Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) — 26 стр.
BS EN ISO 16433:2007
Действует
Resistance welding. Procedure for seam welding of uncoated and coated low carbon steels — 32 стр.
BS EN 473:2008
Заменен
Non-destructive testing. Qualification and certification of NDT personnel. General principles — 36 стр.
BS EN 571-1:1997
Заменен
Non-destructive testing. Penetrant testing. General principles — 16 стр.
BS EN 970:1997
Заменен
Non-destructive examination of fusion welds. Visual examination — 16 стр.
BS EN 12901:1999
Действует
Products used for treatment of water intended for human consumption. Inorganic supporting and filtering materials. Definitions — 28 стр.
BS EN 14359:2006+A1:2010
Заменен
Gas-loaded accumulators for fluid power applications — 102 стр.
BS EN 10021:2006
Действует
General technical delivery conditions for steel products — 20 стр.
BS EN 10061:2003
Действует
Hot rolled hexagon steel bars for general purposes. Dimensions and tolerances on shape and dimensions — 10 стр.
BS EN 1713:1998
Заменен
Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds — 20 стр.
BS EN 1714:1998
Заменен
Non destructive testing of welded joints. Ultrasonic testing of welded joints — 32 стр.
BS EN ISO 6507-4:2005
Заменен
Metallic materials. Vickers hardness test. Tables of hardness values — 92 стр.
BS EN ISO 9018:2003
Заменен
Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints — 20 стр.
BS EN ISO 10447:2007
Заменен
Resistance welding. Peel and chisel testing of resistance spot and projection welds — 18 стр.
BS EN 1337-11:1998
Действует
Structural bearings. Transport, storage and installation — 14 стр.
BS EN 10080:2005
Действует
Steel for the reinforcement of concrete. Weldable reinforcing steel. General — 74 стр.
BS EN 14616:2004
Заменен
Thermal spraying. Recommendations for thermal spraying — 26 стр.
BS EN 15311:2007
Действует
Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions — 12 стр.
BS EN ISO 2063:2005
Заменен
Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys — 22 стр.
BS EN 10088-1:2005
Заменен
Stainless steels, List of stainless steels — 42 стр.
BS EN ISO 2808:2007
Действует
Paints and varnishes. Determination of film thickness — 50 стр.
BS EN ISO 8501-1:2007
Действует
Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness. Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings — 100 стр.
BS EN ISO 8503-1:1995
Заменен
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates, Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces — 16 стр.
BS EN ISO 8503-2:1995
Заменен
Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure — 6 стр.
BS EN ISO 12944-1:1998
Заменен
Paints and varnishes. Corrosion protection of steel structures by protective paint systems. General introduction — 16 стр.
BS EN ISO 14713:1999
Заменен
Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines — 42 стр.
BS EN 10088-2:2005
Заменен
Stainless steels, Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes — 46 стр.
BS EN ISO 13920:1997
Действует
Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position — 16 стр.
BS EN 508-1:2008
Заменен
Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Steel — 50 стр.
BS EN 508-3:2008
Действует
Roofing products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Stainless steel — 42 стр.
BS EN 1993-1-6:2007
Заменен
Eurocode 3. Design of steel structures. Strength and Stability of Shell Structures — 98 стр.
BS EN 1993-1-8:2005
Действует
Eurocode 3. Design of steel structures. Design of joints — 138 стр.
BS EN 10088-3:2005
Заменен
Stainless steels, Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes — 58 стр.
BS EN 1990:2002+A1 (Package)
Действует
Eurocode. Basis of structural design. Compilation of BS EN 1990:2002 and the National Annex.
BS EN 1993-1-11:2006
Действует
Eurocode 3. Design of steel structures. Design of structures with tension components — 38 стр.
BS EN 1993-1-2:2005
Действует
Eurocode 3. Design of steel structures. General rules — 84 стр.
BS EN 1993-1-3:2006
Действует
Eurocode 3. Design of steel structures. General rules — 134 стр.
BS EN 1993-1-4:2006
Действует
Eurocode 3. Design of steel structures. General rules — 38 стр.
BS EN 1993-1-5:2006
Заменен
Eurocode 3. Design of steel structures. Plated structural elements — 56 стр.
BS EN 1993-1-7:2007
Действует
Eurocode 3. Design of steel structures. Plated structures subject to out of plane loading — 40 стр.
BS EN 1993-1-9:2005
Действует
Eurocode 3. Design of steel structures. Fatigue — 40 стр.
BS EN 1993-1-10:2005
Действует
Eurocode 3. Design of steel structures. Material toughness and through-thickness properties — 22 стр.
BS EN 10131:2006
Действует
Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming. Tolerances on dimensions and shape — 16 стр.
BS EN 1993-1-12:2007
Действует
Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700 — 12 стр.
BS EN 1993-2:2006
Действует
Eurocode 3. Design of steel structures. Steel bridges — 106 стр.
BS EN 1993-3-1:2006
Действует
Eurocode 3. Design of steel structures. Towers, masts and chimneys — 84 стр.
BS EN 1993-3-2:2006
Действует
Eurocode 3. Design of steel structures. Towers, masts and chimneys — 34 стр.
BS EN 1993-4-1:2007
Заменен
Eurocode 3. Design of steel structures. Silos — 118 стр.
BS EN 1993-4-2:2007
Заменен
Eurocode 3. Design of steel structures. Tanks — 58 стр.
BS EN 1993-4-3:2007
Действует
Eurocode 3. Design of steel structures. Pipelines — 44 стр.
BS EN 1993-5:2007
Действует
Eurocode 3. Design of steel structures. Piling — 98 стр.
BS EN 10139:1998
Заменен
Cold rolled uncoated mild steel narrow strip for cold forming. Technical delivery conditions — 16 стр.
BS EN 1993-6:2007
Действует
Eurocode 3. Design of steel structures. Crane supporting structures — 40 стр.
BS EN 1994-2:2005
Действует
Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges — 96 стр.
BS EN 1998-1:2004
Действует
Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings — 232 стр.
BS EN 10020:2000
Действует
Definition and classification of grades of steel — 12 стр.
BS EN 10027-1:2005
Заменен
Designation system for steels. Steel names — 28 стр.
BS EN 10027-2:1992
Заменен
Designation systems for steels. Steel numbers — 16 стр.
BS EN 10079:2007
Действует
Definition of steel products — 48 стр.
BS EN 10162:2003
Действует
Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances — 24 стр.
BS EN 13001-1:2004+A1:2009
Заменен
Cranes. General design. General principles and requirements — 34 стр.
BS EN 10140:2006
Действует
Cold rolled narrow steel strip. Tolerances on dimensions and shape — 14 стр.
BS EN ISO 2320:2008
Заменен
Prevailing torque type steel nuts. Mechanical and performance properties — 26 стр.
BS EN ISO 7040:1998
Заменен
Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10 — 12 стр.
BS EN ISO 7042:1998
Заменен
Prevailing torque type all-metal hexagon nuts. Property classes 5, 8, 10 and 12 — 12 стр.
BS EN ISO 7719:1998
Заменен
Prevailing torque type all-metal hexagon nuts, style 1. Property classes 5, 8 and 10 — 12 стр.
BS EN ISO 10511:1998
Заменен
Prevailing torque type hexagon thin nuts (with non-metallic insert) — 12 стр.
BS EN 10143:2006
Действует
Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape — 18 стр.
BS EN ISO 10512:1998
Заменен
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread. Property classes 6, 8 and 10 — 12 стр.
BS EN ISO 10513:1998
Заменен
Prevailing torque type all-metal hexagon nut, style 2, with metric fine pitch thread. Property classes 8, 10 and 12 — 12 стр.
BS EN ISO 9000-1:1994
Действует
Quality management and quality assurance standards, Guidelines for selection and use — 28 стр.
ISO 9000:2005
Действует
Quality management systems -- Fundamentals and vocabulary — 30 стр.
BS EN ISO 21670:2003
Заменен
Hexagon weld nuts with flange — 14 стр.
BS EN ISO 17652-2:2003
Действует
Welding. Test for shop primers in relation to welding and allied processes. Welding properties of shop primers — 18 стр.
BS EN 10149-1:1996
Заменен
Specification for hot-rolled flat products made of high yield strength steels for cold forming. General delivery conditions — 16 стр.
BS ISO 1803:1997
Действует
Building construction. Tolerances. Expression of dimensional accuracy. Principles and terminology — 14 стр.
BS ISO 10005:2005
Заменен
Quality management systems. Guidelines for quality plans — 32 стр.
ASTM A325-06
Заменен
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength — 8 стр.
BS EN 10024:1995
Действует
Hot rolled taper flange I sections. Tolerances on shape and dimensions — 16 стр.
BS EN 10149-2:1996
Заменен
Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for thermomechanically rolled steels — 16 стр.
BS EN 10149-3:1996
Заменен
Specification for hot-rolled flat products made of high yield strength steels for cold forming. Delivery conditions for normalized or normalized rolled steels — 16 стр.
BS EN 10160:1999
Действует
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) — 18 стр.
BS EN 10163-2:2004
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Plate and wide flats — 14 стр.
BS EN 10163-3:2004
Действует
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections. Sections — 12 стр.
BS EN 10164:2004
Заменен
Steel products with improved deformation properties perpendicular to the surface of the product. Technical delivery conditions — 18 стр.
BS EN 10169-1:2003
Заменен
Continuously organic coated (coil coated) steel flat products. General information (definitions, materials, tolerances, test methods) — 24 стр.
BS EN 10169-2:2006
Заменен
Continuously organic coated (coil coated) steel flat products. Products for building exterior applications — 24 стр.
BS EN 10169-3:2003
Заменен
Continuously organic coated (coil coated) steel flat products. Products for building interior applications — 20 стр.
BS EN 10204:2004
Действует
Metallic products. Types of inspection documents — 14 стр.
BS EN 10025-1:2004
Действует
Hot rolled products of structural steels. General technical delivery conditions — 36 стр.
BS EN 10210-1:2006
Действует
Hot finished structural hollow sections of non-alloy and fine grain steels, Technical delivery requirements — 42 стр.
BS EN 10210-2:2006
Действует
Hot finished structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties — 34 стр.
BS EN 10219-1:2006
Действует
Cold formed welded structural hollow sections of non-alloy and fine grain steels, Technical delivery requirements — 38 стр.
BS EN 10219-2:2006
Действует
Cold formed welded structural hollow sections of non-alloy and fine grain steels. Tolerances, dimensions and sectional properties — 40 стр.
BS EN 10268:2006
Действует
Cold rolled steel flat products with high yield strength for cold forming. Technical delivery conditions — 16 стр.
BS EN 10279:2000
Действует
Hot rolled steel channels. Tolerances on shape, dimension and mass — 10 стр.
BS EN 10296-2:2005
Действует
Welded circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions, Stainless steel — 34 стр.
BS EN 10297-2:2005
Действует
Seamless circular steel tubes for mechanical and general engineering purposes. Technical delivery conditions, Stainless steel — 36 стр.
BS EN 10025-2:2004
Действует
Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels — 38 стр.
BS EN ISO 1127:1997
Действует
Stainless steel tubes. Dimensions, tolerances and conventional masses per unit length — 16 стр.
BS EN ISO 9445:2006
Заменен
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form — 26 стр.
BS ISO 4997:2007
Заменен
Cold-reduced carbon steel sheet of structural quality — 16 стр.
BS EN 10340:2007
Действует
Steel castings for structural uses — 26 стр.
BS EN 756:2004
Заменен
Welding consumables. Solid wires, solid wire-flux and tubular cored electrode-flux combinations for submerged arc welding of non alloy and fine grain steels. Classification — 16 стр.
BS EN 757:1997
Заменен
Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification — 14 стр.
BS EN 760:1996
Заменен
Welding consumables. Fluxes for submerged arc welding. Classification — 14 стр.
BS EN 10025-3:2004
Действует
Hot rolled products of structural steels. Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels — 28 стр.
BS EN 1600:1997
Заменен
Welding consumables. Covered electrodes for manual metal arc welding of stainless and heat resisting steels. Classification — 12 стр.
BS EN 13479:2004
Заменен
Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials — 20 стр.
BS EN ISO 6360-1:2004
Действует
Dentistry. Number coding system for rotary instruments. General characteristics — 32 стр.
BS EN ISO 2560:2005
Заменен
Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification — 40 стр.
BS EN ISO 13918:2008
Заменен
Welding. Studs and ceramic ferrules for arc stud welding — 42 стр.
BS EN ISO 14175:2008
Действует
Welding consumables. Gases and gas mixtures for fusion welding and allied processes — 16 стр.
BS EN 10025-4:2004
Действует
Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels — 28 стр.
BS EN ISO 14341:2008
Заменен
Welding consumables. Wire electrodes and deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification — 20 стр.
BS EN ISO 14343:2007
Заменен
Welding consumables. Wire electrodes, strip electrodes, wires and rods for fusion welding of stainless and heat resisting steels. Classification — 18 стр.
BS EN ISO 16834:2007
Заменен
Welding consumables. Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels. Classification — 24 стр.
BS EN ISO 17632:2008
Заменен
Welding consumables. Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels. Classification — 34 стр.
BS EN 10025-5:2004
Действует
Hot rolled products of structual steels. Technical delivery conditons for structural steels with improved atmospheric corrosion resistance — 30 стр.
BS EN ISO 17633:2006
Заменен
Welding consumables. Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels. Classification — 36 стр.
BS EN ISO 18276:2006
Заменен
Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high-strength steels. Classification — 34 стр.
BS EN 14399-1:2005
Заменен
High-strength structural bolting assemblies for preloading. General requirements — 26 стр.
BS EN 14399-2:2005
Заменен
High-strength structural bolting assemblies for preloading. Suitability test for preloading — 16 стр.
BS EN 14399-3:2005
Заменен
High-strength structural bolting for preloading. System HR. Hexagon bolt and nut assemblies — 22 стр.
BS EN 14399-4:2005
Заменен
High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies — 20 стр.
BS EN 14399-5:2005
Заменен
High-strength structural bolting assemblies for preloading. Plain washers — 12 стр.
BS EN 14399-6:2005
Заменен
High-strength structural bolting assemblies for preloading. Plain chamfered washers — 12 стр.
BS EN 10025-6:2004+A1:2009
Действует
Hot rolled products of structural steels. Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition — 28 стр.
BS EN 14399-7:2007
Заменен
High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies — 24 стр.
BS EN 14399-8:2007
Заменен
High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolt and nut assemblies — 20 стр.
BS EN 15048-1:2007
Действует
Non-preloaded structural bolting assemblies. General requirements — 28 стр.
BS EN 20898-2:1994
Заменен
Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread — 28 стр.
BS EN ISO 898-1:2009
Заменен
Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread — 64 стр.
BS EN ISO 1479:1995
Заменен
Specification for hexagon-head tapping screws — 12 стр.
BS 5400-6:1999
Заменен
Steel, concrete and composite bridges, Specification for materials and workmanship, steel — 46 стр.
BS 5950-2:2001
Заменен
Structural use of steelwork in building, Specification for materials, fabrication and erection. Rolled and welded sections — 40 стр.

На этот документ ссылаются

NA to BS EN 1999-1-1:2007
Действует
UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules — 12 стр.
NA to BS EN 1999-1-1:2007+A1:2010
Действует
UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules — 14 стр.
BS EN 1090-1:2009
Действует
Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components — 46 стр.
BS EN 1998-1:2004
Действует
Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings — 232 стр.
PD 6705-2:2010
Действует
Structural use of steel and aluminium. Recommendations for the execution of steel bridges to BS EN 1090-2 — 56 стр.
PD CEN/TR 1317-6:2012
Действует
Road restraint systems. Pedestrian restraint system. Pedestrian parapets — 51 стр.
17/30326406 DC
Действует
BS EN 17168. Railway applications. Platform barrier systems — 53 стр.
BS EN 14399-6:2015
Действует
High-strength structural bolting assemblies for preloading. Plain chamfered washers — 14 стр.
BS EN 14399-5:2015
Действует
High-strength structural bolting assemblies for preloading. Plain washers — 14 стр.
BS EN 14399-4:2015
Действует
High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies — 24 стр.
BS EN 14399-3:2015
Действует
High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies — 32 стр.
BS EN 14399-2:2015
Действует
High-strength structural bolting assemblies for preloading. Suitability for preloading — 24 стр.
BS EN 14199:2015
Действует
Execution of special geotechnical works. Micropiles — 66 стр.
BS EN 13782:2015
Действует
Temporary structure. Tents. Safety — 44 стр.
BS EN 13107:2015
Действует
Safety requirements for cableway installations designed to carry persons. Civil engineering works — 70 стр.
BS EN 13084-7:2012
Действует
Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners — 26 стр.
PD 6695-2:2008+A1:2012
Действует
Recommendations for the design of bridges to BS EN 1993 — 94 стр.
PD 6695-1-9:2008
Действует
Recommendations for the design of structures to BS EN 1993-1-9 — 26 стр.
BS EN 1993-1-6:2007+A1:2017
Действует
Eurocode 3. Design of steel structures. Strength and Stability of Shell Structures — 26 стр.
BS EN 1993-1-6:2007
Заменен
Eurocode 3. Design of steel structures. Strength and Stability of Shell Structures — 98 стр.
BS EN 1994-2:2005
Действует
Eurocode 4. Design of composite steel and concrete structures. General rules and rules for bridges — 96 стр.
BS EN 1994-1-1:2004
Действует
Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings — 122 стр.
BS EN 1993-6:2007
Действует
Eurocode 3. Design of steel structures. Crane supporting structures — 40 стр.
BS EN 1993-5:2007
Действует
Eurocode 3. Design of steel structures. Piling — 98 стр.
BS EN 1993-3-2:2006
Действует
Eurocode 3. Design of steel structures. Towers, masts and chimneys — 34 стр.
BS EN 1993-3-1:2006
Действует
Eurocode 3. Design of steel structures. Towers, masts and chimneys — 84 стр.
BS EN 1993-2:2006
Действует
Eurocode 3. Design of steel structures. Steel bridges — 106 стр.
BS EN 1993-1-9:2005
Действует
Eurocode 3. Design of steel structures. Fatigue — 40 стр.
BS EN 1993-1-8:2005
Действует
Eurocode 3. Design of steel structures. Design of joints — 138 стр.
BS EN 1993-1-4:2006+A1:2015
Действует
Eurocode 3. Design of steel structures. General rules. Supplementary rules for stainless steels — 34 стр.
BS EN 1993-1-3:2006
Действует
Eurocode 3. Design of steel structures. General rules — 134 стр.
BS EN 1993-1-10:2005
Действует
Eurocode 3. Design of steel structures. Material toughness and through-thickness properties — 22 стр.
BS EN 1991-3:2006
Действует
Eurocode 1. Actions on structures. Actions induced by cranes and machinery — 50 стр.
BS EN 1090-3:2008
Действует
Execution of steel structures and aluminium structures. Technical requirements for aluminium structures — 116 стр.
BS ISO 19202-1:2017
Действует
Summer toboggan runs. Safety requirements and test methods — 54 стр.
BS ISO 17842-1:2015
Действует
Safety of amusement rides and amusement devices. Design and manufacture — 170 стр.
BS EN 16681:2016
Действует
Steel static storage systems. Adjustable pallet racking systems. Principles for seismic design — 88 стр.
BS EN 15048-2:2016
Действует
Non-preloaded structural bolting assemblies. Fitness for purpose — 18 стр.
BS EN 15048-1:2016
Действует
Non-preloaded structural bolting assemblies. General requirements — 34 стр.
PD CEN/TR 16949:2016
Действует
Road restraint system. Pedestrian restraint system. Pedestrian parapets — 52 стр.
18/30366946 DC
Действует
BS EN 17206. Entertainment Technology. Lifting and Load-bearing Equipment for Stages and other Production Areas within the Entertainment Industry. Specifications for general requirements (excluding aluminum and steel trusses and towers) — 106 стр.
BS EN 1993-4-2:2007
Заменен
Eurocode 3. Design of steel structures. Tanks — 58 стр.
BS EN 1993-4-2:2007+A1:2017
Действует
Eurocode 3. Design of steel structures. Tanks — 52 стр.
PD CEN ISO/TR 3834-6:2007
Действует
Quality requirements for fusion welding of metallic materials. Guidelines on implementing ISO 3834 — 32 стр.
BS EN 14399-9:2018
Действует
High-strength structural bolting assemblies for preloading. System HR or HV. Direct tension indicators for bolt and nut assemblies — 32 стр.
BS EN 14399-10:2018
Действует
High-strength structural bolting assemblies for preloading. System HRC. Bolt and nut assemblies with calibrated preload — 30 стр.
BS EN 14399-9:2009
Заменен
High strength structural bolting for preloading. System HR or HV. Direct tension indicators for bolt and nut assemblies — 26 стр.
BS EN 14399-10:2009
Заменен
High-strength structural bolting assemblies for preloading. System HRC. Bolt and nut assemblies with calibrated preload — 24 стр.
BS EN 1090-2:2008+A1:2011
Заменен
Execution of steel structures and aluminium structures. Technical requirements for steel structures — 214 стр.
BS EN 1993-4-3:2007
Действует
Eurocode 3. Design of steel structures. Pipelines — 44 стр.
BS EN 15129:2009
Заменен
Anti-seismic devices — 162 стр.
BS EN 15129:2018
Действует
Anti-seismic devices — 180 стр.
BS EN 74-2:2008
Действует
Couplers, spigot pins and baseplates for use in falsework and scaffolds. Special couplers. Requirements and test procedures — 44 стр.
PD 6705-2:2010+A1:2013
Действует
Structural use of steel and aluminium. Recommendations for the execution of steel bridges to BS EN 1090-2 — 56 стр.
BS 559:2009
Действует
Specification for the design and construction of signs for publicity, decorative and general purposes — 26 стр.
ÖNORM EN 74-2:2009-01
Действует
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
ÖNORM EN 14399-1:2015-06
Действует
High-strength structural bolting assemblies for preloading - Part 1: General requirements