Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыBSI

BS EN 1090-3:2008

Действует
Execution of steel structures and aluminium structures. Technical requirements for aluminium structures — 116 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ISO 15977:2002
Действует
Open end blind rivets with break pull mandrel and protruding head. AIA/St — 9 стр.
BS EN ISO 15977:2002
Действует
Open end blind rivets with break pull mandrel and protruding head. AIA/St — 16 стр.
ISO 15974:2000
Действует
Closed end blind rivets with break pull mandrel and countersunk head. AIA/St — 8 стр.
BS EN ISO 15974:2001
Действует
Closed and blind rivets with break pull mandrel and countersunk head. AIA/St — 16 стр.
ISO 15973:2000
Действует
Closed end blind rivets with break pull mandrel and protruding head. AIA/St — 10 стр.
BS EN ISO 15973:2001
Действует
Closed and blind rivets with break pull mandrel and protruding head. AIA/St — 16 стр.
BS EN 22553:1995
Заменен
Welded, brazed and soldered joints. Symbolic representation on drawings — 60 стр.
BS EN 12487:2007
Действует
Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys — 20 стр.
BS EN 12373-11:2001
Заменен
Aluminium and aluminium alloys. Anodizing. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20$0D, 45$0D, 60$0D, and 85$0D — 22 стр.
BS EN ISO 10513:2012
Действует
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread. Property classes 8, 10 and 12 — 12 стр.
BS EN ISO 10512:2012
Действует
Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread. Property classes 6, 8 and 10 — 12 стр.
BS EN ISO 10511:2012
Действует
Prevailing torque type hexagon thin nuts (with non-metallic insert) — 12 стр.
BS EN ISO 7719:2012
Действует
Prevailing torque type all-metal hexagon regular nuts. Property classes 5, 8 and 10 — 12 стр.
BS EN ISO 7042:2012
Действует
Prevailing torque type all-metal hexagon high nuts. Property classes 5, 8, 10 and 12 — 12 стр.
BS EN ISO 7040:2012
Действует
Prevailing torque type hexagon regular nuts (with non-metallic insert). Property classes 5, 8 and 10 — 12 стр.
BS EN ISO 2320:2015
Действует
Fasteners. Prevailing torque steel nuts. Functional properties — 30 стр.
ISO 17123-7:2005
Действует
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 7: Optical plumbing instruments — 20 стр.
ISO 17123-4:2012
Действует
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 4: Electro-optical distance meters (EDM measurements to reflectors) — 30 стр.
ISO 17123-3:2001
Действует
Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 3. Theodolites — 26 стр.
ISO 17123-1:2014
Действует
Optics and optical instruments -- Field procedures for testing geodetic and surveying instruments -- Part 1: Theory — 46 стр.
BS ISO 10509:2012
Действует
Hexagon flange head tapping screws — 12 стр.
BS ISO 8062-4:2017
Действует
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts. Part 4: General tolerances for castings using profile tolerancing in a general datum system — 34 стр.
ISO 7976-2:1989
Действует
Tolerances for building; methods of measurement of buildings and building products; part 2: position of measuring points — 28 стр.
ISO 7976-1:1989
Действует
Tolerances for building; methods of measurement of buldings and building products; part 1: methods and instruments — 88 стр.
ISO 4463-1:1989
Действует
Measurement methods for building; setting-out and measurement; part 1: planning and organization, measuring procedures, acceptance criteria — 21 стр.
ISO 18273:2004
Заменен
Welding consumables -- Wire electrodes, wires and rods for welding of aluminium and aluminium alloys – Classification — 12 стр.
BS EN ISO 18273:2015
Действует
Welding consumables. Wire electrodes, wires and rods for welding of aluminium and aluminium alloys. Classification — 18 стр.
ISO 17659:2002
Действует
Welding. Multilingual terms for welded joints with illustrations — 49 стр.
BS EN ISO 17659:2004
Действует
Welding. Multilingual terms for welded joints with illustrations — 62 стр.
ISO 15614-2:2005
Действует
Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 2: Arc welding of aluminium and its alloys — 38 стр.
BS EN ISO 15614-2:2005
Действует
Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc welding of aluminium and its alloys — 38 стр.
ISO 15613:2004
Действует
Specification and qualification of welding procedures for metallic materials -- Qualification based on pre-production welding test — 12 стр.
BS EN ISO 15613:2004
Действует
Specification and qualification of welding procedures for metallic materials. Qualification based on pre-production welding test — 12 стр.
ISO 15612:2004
Заменен
Specification and qualification of welding procedures for metallic materials -- Qualification by adoption of a standard welding procedure — 14 стр.
BS EN ISO 15612:2004
Заменен
Specification and qualification of welding procedures for metallic materials. Qualification by adoption of a standard welding procedure — 14 стр.
ISO 15609-1:2004
Действует
Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 1: Arc welding — 14 стр.
BS EN ISO 15609-1:2004
Действует
Specification and qualification of welding procedures for metallic materials. Welding procedure specification. Arc welding — 14 стр.
ISO 15481:1999
Действует
Cross recessed pan head drilling screws with tapping screw thread — 7 стр.
BS EN ISO 15481:1999
Действует
Cross recessed pan head drilling screws with tapping screw thread — 16 стр.
BS EN 1090-3:2008
Действует
Execution of steel structures and aluminium structures. Technical requirements for aluminium structures — 116 стр.
ISO 15480:1999
Действует
Hexagon washer head drilling screws with tapping screw thread — 8 стр.
BS EN ISO 15480:1999
Действует
Hexagon washer head drilling screws with tapping screw thread — 16 стр.
ISO 14731:2006
Действует
Welding coordination -- Tasks and responsibilities — 18 стр.
BS EN ISO 14731:2006
Действует
Welding coordination. Tasks and responsibilities — 22 стр.
ISO 13920:1996
Действует
Welding - General tolerances for welded constructions - Dimensions for lengths and angles - Shape and position — 12 стр.
BS EN ISO 13920:1997
Действует
Welding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape and position — 16 стр.
BS EN ISO 13918:2008
Заменен
Welding. Studs and ceramic ferrules for arc stud welding — 42 стр.
ISO 10642:2004
Действует
Hexagon socket countersunk head screws — 12 стр.
BS EN ISO 10642:2004
Действует
Hexagon socket countersunk head screws — 16 стр.
ISO 10042:2005
Заменен
Welding -- Arcwelded joints in aluminium and its alloys -- Quality levels for imperfections — 26 стр.
BS EN ISO 10042:2005
Заменен
Welding. Arc-welded joints in aluminium and its alloys. Quality levels for imperfections — 30 стр.
ISO 9606-2:2004
Действует
Qualification test of welders -- Fusion welding -- Part 2: Aluminium and aluminium alloys — 40 стр.
BS EN ISO 9606-2:2004
Действует
Qualification test of welders. Fusion welding. Aluminium and aluminium alloys — 42 стр.
ISO 9018:2003
Заменен
Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints — 16 стр.
BS EN ISO 9018:2015
Действует
Destructive tests on welds in metallic materials. Tensile test on cruciform and lapped joints — 20 стр.
ISO 9013:2002
Заменен
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances — 30 стр.
BS EN ISO 9013:2002
Заменен
Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances — 36 стр.
ISO 9000:2005
Заменен
Quality management systems -- Fundamentals and vocabulary — 38 стр.
BS EN ISO 9000-1:1994
Действует
Quality management and quality assurance standards, Guidelines for selection and use — 28 стр.
ISO 7094:2000
Действует
Plain washers. Extra large series. Product grade C — 8 стр.
BS EN ISO 7094:2000
Действует
Plain washers. Extra large series. Product grade C — 14 стр.
ISO 7093-2:2000
Действует
Plain washers. Large series. Part 2. Product grade C — 10 стр.
BS EN ISO 7093-2:2000
Действует
Plain washers. Large series. Product grade C — 14 стр.
ISO 7093-1:2000
Действует
Plain washers. Large series. Part 1. Product grade A — 10 стр.
BS EN ISO 7093-1:2000
Действует
Plain washers. Large series. Product grade A — 16 стр.
ISO 7091:2000
Действует
Plain washers. Normal series. Product grade C — 10 стр.
BS EN ISO 7091:2000
Действует
Plain washers. Normal series. Product grade C — 14 стр.
ISO 7090:2000
Действует
Plain washers chamfered. Normal series. Product grade A — 10 стр.
BS EN ISO 7090:2000
Действует
Plain washers, chamfered. Normal series. Product grade A — 16 стр.
ISO 7089:2000
Действует
Plain washers. Normal series. Product grade A — 9 стр.
BS EN ISO 7089:2000
Действует
Plain washers. Normal series. Product grade A — 16 стр.
ISO 15981:2002
Действует
Open end blind rivets with break pull mandrel and protruding head. AlA/AlA — 9 стр.
BS EN ISO 15981:2002
Действует
Open end blind rivets with break pull mandrel and protruding head. AIA/AIA — 16 стр.
ISO 15978:2002
Действует
Open end blind rivets with break pull mandrel and countersunk head. AIA/St — 9 стр.
BS EN ISO 15978:2002
Действует
Open end blind rivets with break pull mandrel and countersunk head. AIA/St — 16 стр.
BS EN ISO 7049:2011
Действует
Cross-recessed pan head tapping screws — 12 стр.
BS EN ISO 7046-2:2011
Действует
Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws — 14 стр.
ISO 6789:2003
Заменен
Assembly tools for screws and nuts -- Hand torque tools -- Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure — 22 стр.
BS EN ISO 6789-2:2017
Действует
Assembly tools for screws and nuts. Hand torque tools. Requirements for calibration and determination of measurement uncertainty — 50 стр.
ISO 6520-1:2007
Действует
Welding and allied processes -- Classification of geometric imperfections in metallic materials -- Part 1: Fusion welding — 62 стр.
BS EN ISO 6520-1:2007
Действует
Welding and allied processes. Classification of geometric imperfections in metallic materials. Fusion welding — 66 стр.
ISO 4762:2004
Действует
Hexagon socket head cap screws — 16 стр.
BS EN ISO 4762:2004
Действует
Hexagon socket head cap screws — 20 стр.
ISO 4288:1996
Действует
Geometrical product specifications (GPS). Surface texture. Profile method. Rules and procedures for the assessment of surface texture — 16 стр.
BS EN ISO 4288:1998
Действует
Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture — 24 стр.
BS EN ISO 4063:2010
Действует
Welding and allied processes. Nomenclature of processes and reference numbers — 34 стр.
BS EN ISO 4034:2012
Действует
Hexagon regular nuts (style 1). Product grade C — 14 стр.
BS EN ISO 4032:2012
Действует
Hexagon regular nuts (style 1). Product grades A and B — 16 стр.
BS EN ISO 4018:2011
Действует
Hexagon head screws. Product grade C — 16 стр.
BS EN ISO 4017:2014
Действует
Fasteners. Hexagon head screws. Product grades A and B — 20 стр.
BS EN ISO 4016:2011
Действует
Hexagon head bolts. Product grade C — 16 стр.
BS EN ISO 4014:2011
Действует
Hexagon head bolts. Product grades A and B — 22 стр.
ISO 3834-4:2005
Действует
Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality requirements — 8 стр.
BS EN ISO 3834-4:2005
Действует
Quality requirements for fusion welding of metallic materials. Elementary quality requirements — 12 стр.
ISO 3834-3:2005
Действует
Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality requirements — 14 стр.
BS EN ISO 3834-3:2005
Действует
Quality requirements for fusion welding of metallic materials. Standard quality requirements — 18 стр.
BS EN ISO 3834-2:2005
Действует
Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements — 20 стр.
BS EN ISO 3506-2:2009
Действует
Mechanical properties of corrosion-resistant stainless steel fasteners. Nuts — 30 стр.
BS EN ISO 3506-1:2009
Действует
Mechanical properties of corrosion-resistant stainless steel fasteners. Bolts, screws and studs — 36 стр.
BS EN ISO 2009:2011
Действует
Slotted countersunk flat head screws. Product grade A — 14 стр.
BS EN ISO 14819-6:2006
Действует
Traffic and traveller information (TTI). TTI messages via traffic message coding. Encryption and conditional access for the radio data system. Traffic message channel ALERT C coding — 30 стр.
BS EN ISO 14798:2013
Действует
Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology — 50 стр.
BS EN ISO 898-1:2013
Действует
Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread — 64 стр.
ISO 8839:1986
Действует
Mechanical properties of fasteners; Bolts, screws, studs and nuts made of non-ferrous metals — 8 стр.
BS EN 28839:1992
Действует
Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals — 12 стр.
BS EN 20898-2:1994
Заменен
Mechanical properties of fasteners. Nuts with specified proof load values. Coarse thread — 28 стр.
BS EN 15088:2005
Действует
Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery — 32 стр.
BS EN 14399-8:2007
Заменен
High-strength structural bolting assemblies for preloading. System HV. Hexagon fit bolt and nut assemblies — 20 стр.
BS EN 14399-7:2007
Заменен
High-strength structural bolting assemblies for preloading. System HR. Countersunk head bolt and nut assemblies — 24 стр.
BS EN 14399-6:2015
Действует
High-strength structural bolting assemblies for preloading. Plain chamfered washers — 14 стр.
BS EN 14399-5:2015
Действует
High-strength structural bolting assemblies for preloading. Plain washers — 14 стр.
BS EN 14399-4:2015
Действует
High-strength structural bolting assemblies for preloading. System HV. Hexagon bolt and nut assemblies — 24 стр.
BS EN 14399-3:2015
Действует
High-strength structural bolting assemblies for preloading. System HR. Hexagon bolt and nut assemblies — 32 стр.
BS EN 14399-2:2015
Действует
High-strength structural bolting assemblies for preloading. Suitability for preloading — 24 стр.
BS EN 12206-1:2004
Действует
Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes. Coatings prepared from coating powder — 28 стр.
BS EN 12020-2:2016
Действует
Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Tolerances on dimensions and form — 22 стр.
BS EN 12020-1:2008
Действует
Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 and EN AW-6063. Technical conditions for inspection and delivery — 14 стр.
BS EN 10204:2004
Действует
Metallic products. Types of inspection documents — 14 стр.
BS EN 1999-1-5:2007
Действует
Eurocode 9. Design of aluminium structures. Shell structures — 70 стр.
BS EN 1999-1-4:2007
Действует
Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting — 68 стр.
BS EN 1999-1-3:2007
Действует
Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue — 100 стр.
BS EN 1999-1-2:2007
Действует
Eurocode 9. Design of aluminium structures. Structural fire design — 64 стр.
BS EN 1999-1-1:2007
Действует
Eurocode 9. Design of aluminium structures. General structural rules — 210 стр.
BS EN 1706:2010
Действует
Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties — 30 стр.
BS EN 1559-4:2015
Действует
Founding. Technical conditions of delivery. Additional requirements for aluminium alloy castings — 18 стр.
BS EN 1559-1:2011
Действует
Founding. Technical conditions of delivery. General — 28 стр.
BS EN 14353:2007+A1:2010
Заменен
Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods — 34 стр.
BS EN 14189:2003
Заменен
Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders — 12 стр.
BS EN 1337-11:1998
Действует
Structural bearings. Transport, storage and installation — 14 стр.
BS EN 1337-8:2007
Действует
Structural bearings. Guide bearings and restraint bearings — 30 стр.
BS EN 1337-6:2004
Действует
Structural bearings. Rocker bearings — 32 стр.
BS EN 1337-5:2005
Действует
Structural bearings. Pot bearings — 60 стр.
BS EN 1337-4:2004
Действует
Structural bearings. Roller bearings — 34 стр.
BS EN 1337-3:2005
Действует
Structural bearings. Elastomeric bearings — 98 стр.
BS EN 13212:2001
Заменен
Road marking materials. Requirements for factory production control — 12 стр.
BS EN 13208:2003
Действует
Food processing machinery. Vegetable peelers. Safety and hygiene requirements — 42 стр.
BS EN 1301-3:2008
Действует
Aluminium and aluminium alloys. Drawn wire. Tolerances on dimensions — 10 стр.
BS EN 1301-1:2008
Действует
Aluminium and aluminium alloys. Drawn wire. Technical conditions for inspection and delivery — 14 стр.
BS EN 1090-2:2008
Действует
Execution of steel structures and aluminium structures. Technical requirements for the execution of steel structures — 208 стр.
BS EN 1011-4:2000
Действует
Welding. Recommendations for welding of metallic materials. Arc welding of aluminium and aluminium alloys — 26 стр.
BS EN 1011-1:2009
Действует
Welding. Recommendations for welding of metallic materials. General guidance for arc welding — 18 стр.
BS EN 970:1997
Заменен
Non-destructive examination of fusion welds. Visual examination — 16 стр.
BS EN 755-4:2008
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Square bars, tolerances on dimensions and form — 14 стр.
BS EN 755-3:2008
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Round bars, tolerances on dimensions and form — 12 стр.
BS EN 755-1:2016
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Technical conditions for inspection and delivery — 24 стр.
BS EN 754-8:2016
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Porthole tubes, tolerances on dimensions and form — 22 стр.
BS EN 754-7:2016
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Seamless tubes, tolerances on dimensions and form — 20 стр.
BS EN 754-6:2008
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Hexagonal bars, tolerances on dimensions and form — 12 стр.
BS EN 754-5:2008
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Rectangular bars, tolerances on dimensions and form — 14 стр.
BS EN 754-4:2008
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Square bars, tolerances on dimensions and form — 12 стр.
BS EN 754-3:2008
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Round bars, tolerances on dimensions and form — 10 стр.
BS EN 754-1:2016
Действует
Aluminium and aluminium alloys. Cold drawn rod/bar and tube. Technical conditions for inspection and delivery — 22 стр.
BS EN 586-3:2001
Действует
Aluminium and aluminium alloys. Forgings. Tolerances on dimensions and form — 59 стр.
BS EN 586-1:1998
Действует
Aluminium and aluminium alloys. Forgings. Technical conditions for inspection and delivery — 10 стр.
BS EN 573-3:2013
Действует
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products — 38 стр.
BS EN 573-2:1995
Действует
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical symbol based designation system — 12 стр.
BS EN 573-1:2004
Действует
Aluminium and aluminium alloys. Chemical composition and form of wrought products. Numerical designation system — 12 стр.
BS EN 571-1:1997
Заменен
Non-destructive testing. Penetrant testing. General principles — 16 стр.
BS EN 515:2017
Действует
Aluminium and aluminium alloys. Wrought products. Temper designations — 28 стр.
BS EN 485-4:1994
Действует
Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on shape and dimensions for cold-rolled products — 16 стр.
BS EN 485-3:2003
Действует
Aluminium and aluminium alloys. Sheet, strip and plate. Tolerances on dimensions and form for hot-rolled products — 14 стр.
BS EN 485-1:2008
Действует
Aluminium and aluminium alloys. Sheet, strip and plate. Technical conditions for inspection and delivery — 20 стр.
BS EN 473:2008
Заменен
Non-destructive testing. Qualification and certification of NDT personnel. General principles — 36 стр.
BS EN 755-9:2016
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Profiles, tolerances on dimensions and form — 22 стр.
BS EN 755-8:2016
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Porthole tubes, tolerances on dimensions and form — 22 стр.
BS EN 755-7:2016
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Seamless tubes, tolerances on dimensions and form — 22 стр.
BS EN 755-6:2008
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Hexagonal bars, tolerances on dimensions and form — 14 стр.
BS EN 755-5:2008
Действует
Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Rectangular bars, tolerances on dimensions and form — 16 стр.

На этот документ ссылаются

NA to BS EN 1999-1-1:2007
Действует
UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules — 12 стр.
NA to BS EN 1999-1-1:2007+A1:2010
Действует
UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules — 14 стр.
BS EN 1999-1-4:2007
Действует
Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting — 68 стр.
BS EN 1999-1-1:2007+A1:2009
Действует
Eurocode 9. Design of aluminium structures. General structural rules — 212 стр.
BS EN 1090-1:2009
Действует
Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components — 46 стр.
BS EN 13195:2009
Заменен
Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) — 24 стр.
PD CEN/TR 1317-6:2012
Действует
Road restraint systems. Pedestrian restraint system. Pedestrian parapets — 51 стр.
17/30326406 DC
Действует
BS EN 17168. Railway applications. Platform barrier systems — 53 стр.
CWA 15902-2:2008
Действует
Lifting and load-bearing equipment for stages and other production areas within the entertainment industry. Specifications for design, manufacture and for use of aluminium and steel trusses and towers — 34 стр.
BS EN 13107:2015
Действует
Safety requirements for cableway installations designed to carry persons. Civil engineering works — 70 стр.
PD 6705-3:2009
Действует
Structural use of steel and aluminium. Recommendations for the execution of aluminium structures to BS EN 1090-3 — 28 стр.
BS EN 1999-1-5:2007
Действует
Eurocode 9. Design of aluminium structures. Shell structures — 70 стр.
BS EN 1999-1-2:2007
Действует
Eurocode 9. Design of aluminium structures. Structural fire design — 64 стр.
BS EN 1090-3:2008
Действует
Execution of steel structures and aluminium structures. Technical requirements for aluminium structures — 116 стр.
BS EN 15048-2:2016
Действует
Non-preloaded structural bolting assemblies. Fitness for purpose — 18 стр.
BS EN 15048-1:2016
Действует
Non-preloaded structural bolting assemblies. General requirements — 34 стр.
PD CEN/TR 17052:2017
Действует
Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components — 20 стр.
PD CEN/TR 16949:2016
Действует
Road restraint system. Pedestrian restraint system. Pedestrian parapets — 52 стр.
PD ISO/TS 20273:2017
Действует
Guidelines on weld quality in relationship to fatigue strength — 52 стр.
18/30366946 DC
Действует
BS EN 17206. Entertainment Technology. Lifting and Load-bearing Equipment for Stages and other Production Areas within the Entertainment Industry. Specifications for general requirements (excluding aluminum and steel trusses and towers) — 106 стр.
BS EN 1090-5:2017
Действует
Execution of steel structures and aluminium structures. Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications — 68 стр.
BS EN 13195:2013
Действует
Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) — 24 стр.
BS EN 16031:2012
Действует
Adjustable telescopic aluminium props. Product specifications, design and assessment by calculation and tests — 38 стр.
BS EN 17115:2018
Действует
Entertainment technology. Specifications for design and manufacture of aluminium and steel trusses — 20 стр.
18/30368648 DC
Действует
BS EN 17293. Temporary works equipment. Execution. Requirements for manufacturing — 16 стр.
BS EN 12812:2008
Действует
Falsework. Performance requirements and general design — 48 стр.
BS EN 1999-1-1:2007+A2:2013
Действует
Eurocode 9: Design of aluminium structures. General structural rules — 212 стр.
BS EN 1999-1-3:2007+A1:2011
Действует
Eurocode 9. Design of aluminium structures. Structures susceptible to fatigue — 108 стр.
BS EN 1090-1:2009+A1:2011
Действует
Execution of steel structures and aluminium structures. Requirements for conformity assessment of structural components — 46 стр.
BS EN 1999-1-4:2007+A1:2011
Действует
Eurocode 9. Design of aluminium structures. Cold-formed structural sheeting — 68 стр.
PD 6702-1:2009
Действует
Structural use of aluminium, Recommendations for the design of aluminium structures to BS EN 1999 — 44 стр.
BS EN 1090-3:2019
Действует
Execution of steel structures and aluminium structures, Technical requirements for aluminium structures — 130 стр.
DD ENV 1090-3:2000
Заменен
Execution of steel structures, Supplementary rules for high yield strength steels — 24 стр.
NA to BS EN 1999-1-1:2007+A1:2009
Действует
UK National Annex to Eurocode 9. Design of aluminium structures, General structural rules — 14 стр.