Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыBSI

BS EN 61249-2-7:2002

Действует
Materials for interconnection structures. Sectional specification set for reinforced base materials, clad and unclad. Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad — 24 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

BS EN 61249-5-1:1996
Действует
Materials for interconnection structures. Sectional specification set for conductive foils and films with and without coatings. Copper foils (for the manufacture of copper-clad base materials) — 26 стр.
IEC 61249-5-1:1995 ed1.0
Действует
Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) — 39 стр.
IEC 61189-2:1997 ed1.0
Заменен
Test methods for electrical materials, interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures — 139 стр.

На этот документ ссылаются

BS EN 60738-1:2006
Действует
Thermistors. Directly heated positive temperature coefficient. Generic specification — 60 стр.
BS EN 60115-1:2011
Действует
Fixed resistors for use in electronic equipment. Generic specification — 86 стр.
BS EN 60127-4:2005+A1:2009
Действует
Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types — 34 стр.
BS EN 60539-1:2008
Действует
Directly heated negative temperature coefficient thermistors. Generic specification — 50 стр.
BS EN 60384-1:2009
Действует
Fixed capacitors for use in electronic equipment. Generic specification — 84 стр.
BS EN 50155:2007
Заменен
Railway applications. Electronic equipment used on rolling stock — 46 стр.
BS EN 62137-4:2014
Действует
Electronics assembly technology. Endurance test methods for solder joint of area array type package surface mount devices — 48 стр.
BS EN 62137-3:2012
Действует
Electronics assembly technology. Selection guidance of environmental and endurance test methods for solder joints — 45 стр.
BS EN 62137-1-5:2009
Действует
Surface mounting technology. Environmental and endurance test methods for surface mount solder joints. Mechanical shear fatigue test — 28 стр.
BS EN 62137-1-4:2009
Действует
Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic bending test — 18 стр.
BS EN 62137-1-3:2009
Действует
Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic drop test — 26 стр.
BS EN 62137-1-2:2007
Действует
Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Shear strength test — 20 стр.
BS EN 62137-1-1:2007
Действует
Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Pull strength test — 18 стр.
BS EN 62326-20:2016
Действует
Printed boards. Printed circuit boards for high-brightness LEDs — 54 стр.
BS EN 61249-4-17:2009
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.
BS EN 61249-4-16:2009
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.
BS EN 61249-4-15:2009
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.
BS EN 61249-4-14:2009
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly — 20 стр.
BS EN 61249-4-12:2005
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated multifuctional epoxide woven E-glass prepeg of defined flammability — 16 стр.
BS EN 61249-4-11:2005
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad. Non-halogenated epoxide woven E-glass prepeg of defined flammability — 16 стр.
BS EN 61249-4-1:2008
Действует
Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability — 16 стр.
BS EN 61189-5-4:2015
Действует
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Solder alloys and fluxed and non-fluxed solid wire for printed board assemblies — 26 стр.
BS EN 61189-5-3:2015
Действует
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Soldering paste for printed board assemblies — 46 стр.
BS EN 61189-5-2:2015
Действует
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Soldering flux for printed board assemblies — 46 стр.
BS EN 61189-5-1:2016
Действует
Test methods for electrical materials, printed boards and other interconnection structures and assemblies. General test methods for materials and assemblies. Guidance for printed board assemblies — 32 стр.
BS EN 61051-1:2008
Действует
Varistors for use in electronic equipment. Generic specification — 40 стр.
BS EN 60384-1:2016
Действует
Fixed capacitors for use in electronic equipment. Generic specification — 90 стр.
BS EN 60393-1:2009
Действует
Potentiometers for use in electronic equipment. Generic specification — 110 стр.
BS EN 60352-8:2011
Действует
Solderless connections. Compression mount connections. General requirements, test methods and practical guidance — 24 стр.
18/30361290 DC
Действует
BS EN 81-22. Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods. Part 22. Passenger and goods passenger lifts with inclined travel path — 227 стр.
BS EN 62024-1:2008
Заменен
High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor — 22 стр.
BS EN IEC 62024-1:2018
Действует
High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor — 24 стр.
BS EN 60539-1:2016
Действует
Directly heated negative temperature coefficient thermistors. Generic specification — 62 стр.
BS EN 60068-2-58:2004
Заменен
Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) — 30 стр.
BS EN 60127-3:2015
Действует
Miniature fuses. Sub-miniature fuse-links — 30 стр.
BS EN 60127-2:2014
Действует
Miniature fuses. Cartridge fuse-links — 46 стр.
BS EN IEC 60127-8:2018
Действует
Miniature fuses. Fuse resistors with particular overcurrent protection — 30 стр.
BS EN 60738-1:2006+A1:2009
Действует
Thermistors. Directly heated positive temperature coefficient. Generic specification — 60 стр.
BS EN 60127-4:2005+A2:2013
Действует
Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types — 36 стр.
BS EN 62326-1:2002
Действует
Printed boards. Generic specification — 56 стр.
BS EN 61189-5:2006
Действует
Test methods for electrical materials, interconnection structures and assemblies. Test methods for printed board assemblies — 66 стр.
BS EN 60127-7:2016
Действует
Miniature fuses. Miniature fuse-links for special applications — 34 стр.
BS EN 60068-2-21:2006
Действует
Environmental testing. Tests. Test U: Robustness of terminations and integral mounting devices — 32 стр.
BS EN 60115-1:2011+A11:2015
Действует
Fixed resistors for use in electronic equipment. Generic specification — 84 стр.
BS EN 60249-2-5:1994
Заменен
Specifications, Specification No 5. Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) — 18 стр.
BS EN 60249-2-12:1994
Заменен
Specifications, Thin epoxide woven glass fabric copper-clad laminated sheet of defined flammability, for use in the fabrication of multilayer printed boards — 14 стр.
ÖVE/ÖNORM EN 60393-1:2010-03
Действует
Potentiometers for use in electronic equipment - Part 1: Generic specification (IEC 60393-1:2008) (english version)
ÖVE/ÖNORM EN 62137-4:2015-09
Действует
Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (IEC 62137-4:2014) (english version)
ÖVE/ÖNORM EN 60738-1:2010-07
Действует
Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification (IEC 60738-1:2006 + A1:2009) (english version)
ÖVE/ÖNORM EN 60127-4:2014-02
Действует
Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types (IEC 60127-4:2005 + A1:2008 + A2:2012) (english version)
ÖVE/ÖNORM EN 60352-8:2012-02
Действует
Solderless connections - Part 8: Compression mount connections - General requirements, test methods and practical guidance (IEC 60352-8:2011) (english version)
ÖVE/ÖNORM EN 62137-1-5:2010-02
Действует
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-5: Mechanical shear fatigue test (IEC 62137-1-5:2009) (english version)
ÖVE/ÖNORM EN 62137-3:2012-10
Действует
Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints (IEC 62137-3:2011) (english version)
ÖVE/ÖNORM EN 62137-1-4:2009-10
Действует
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-4: Cyclic bending test (IEC 62137-1-4:2009) (english version)
ÖVE/ÖNORM EN 62137-1-3:2009-08
Действует
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test (IEC 62137-1-3:2008) (english version)
ÖVE/ÖNORM EN 60127-3:2015-12
Заменен
Miniature fuses -- Part 3: Sub-miniature fuse-links (IEC 60127-3:2015) (english version)
OVE EN 60115-1:2016-04
Действует
Fixed resistors for use in electronic equipment -- Part 1: Generic specification (english version)