Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыBSI

BS EN ISO 13710:2004

Действует
Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps — 90 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

ISO 7886-1:1993
Заменен
Sterile hypodermic syringes for single use; part 1: syringes for manual use — 32 стр.
BS ISO 26262-9:2011
Действует
Road vehicles. Functional safety. Automotive safety integrity level (ASIL)-oriented and safety-oriented analyses — 26 стр.
BS ISO 9657:2004
Действует
Pliers and nippers for electronics. General technical requirements — 10 стр.
BS ISO 1328-1:2013
Действует
Cylindrical gears. ISO system of flank tolerance classification. Definitions and allowable values of deviations relevant to flanks of gear teeth — 60 стр.
BS ISO 5753-2:2010
Действует
Rolling bearings. Internal clearance. Axial internal clearance for four-point-contact ball bearings — 10 стр.
ISO 6708:1995
Действует
Pipework components - Definition and selection of DN (nominal size) — 4 стр.
ISO 8501-1:2007
Действует
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings — 96 стр.
ISO 10438-1:2007
Действует
Petroleum, petrochemical and natural gas industries -- Lubrication, shaft-sealing and control-oil systems and auxiliaries -- Part 1: General requirements — 68 стр.
IEC 60034-7:1992 ed2.0
Заменен
Rotating electrical machines - Part 7: Classification of types of constructions and mounting arrangements (IM Code) — 45 стр.
IEC 60079-5:2015 ed4.0
Действует
Explosive atmospheres - Part 5: Equipment protection by powder filling "q" — 41 стр.
BS EN 2878:2018
Действует
Aerospace series. Nuts, anchor, self-locking, air resistant, sealing, floating, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 900 MPa (at ambient temperature)/235 $0DC — 10 стр.
BS EN 2883:2009
Действует
Aerospace series. Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315$0DC — 10 стр.
BS EN 13445-4:2014
Действует
Unfired pressure vessels. Fabrication — 74 стр.
API RP 686:2009
Действует
Machinery Installation and Installation Design, Second Edition — 254 стр.
ASME B1.11-1958
Действует
Microscope Objective Thread (B1.11 - 1958) — 9 стр.
ASME B16.11-2016
Действует
Forged Fittings, Socket-Welding and Threaded — 32 стр.
ASME B16.50-2001
Доступна более новая редакция
Wrought Copper and Copper Alloy Braze-Joint Pressure Fittings — 24 стр.
ISO 228-1:2000
Действует
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation — 14 стр.
BS ISO 26162:2012
Действует
Systems to manage terminology, knowledge and content. Design, implementation and maintenance of terminology management systems — 80 стр.
ISO 286-2:2010
Действует
Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts — 60 стр.
BS ISO 7240-8:2007
Заменен
Fire detection and alarm systems. Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor — 62 стр.
ISO 1940-1:2003/Cor.1:2005
Действует
Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances -- Technical Corrigendum 1 — 2 стр.
ISO 3448:1992
Действует
Industrial liquid lubricants; ISO vicosity classification — 12 стр.
ISO 7005-2:1988
Действует
Metallic flanges; part 2: cast iron flanges — 40 стр.
ISO 13707:2000
Действует
Petroleum and natural gas industries. Reciprocating compressors — 174 стр.
BS ISO 15649:2001
Действует
Petroleum and natural gas industries. Piping — 24 стр.
ASME B16.42-2011
Доступна более новая редакция
Ductile Iron Pipe Flanges and Flanged Fittings: Classes 150 and 300 (B16.42 - 2011) — 48 стр.
ASME B16.47-2006
Доступна более новая редакция
Large Diameter Steel Flanges: NPS 26 Through NPS 60 Metric/Inch Standard (B16.47 - 2006) — 108 стр.
AWS D1.1-SWJ-WC
Действует
WELDED JOINT DETAILS FOR STRUCTURAL APPLICATIONS WALL CHART
DIN 910:2010-10
Отменен
Hexagon-duty hexagon head screw plugs - Type large - cylindrical thread
ISO 18573:2012
Действует
Conveyor belts -- Test atmospheres and conditioning periods — 12 стр.
BS ISO 10835:2007
Действует
Direct reduced iron and hot briquetted iron. Sampling and sample preparation — 62 стр.
BS ISO 4991:2015
Действует
Steel castings for pressure purposes — 28 стр.
ISO 9327-2:1999
Действует
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties — 13 стр.
BS ISO 11972:2015
Действует
Corrosion-resistant cast steels for general applications — 16 стр.
ISO 683-10:1987
Заменен
Heat-treatable steels, alloy steels and free-cutting steels; Part 10 : Wrought nitriding steels — 15 стр.
ISO 683-18:1996
Заменен
Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright products of unalloyed and low alloy steels — 39 стр.
ISO 3506-1:2009
Действует
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs — 34 стр.
ISO 3506-2:2009
Действует
Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 2: Nuts — 28 стр.
ISO 9327-4:1999
Действует
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 4: Weldable fine grain steels with high proof strength — 11 стр.
ISO 9327-5:1999
Действует
Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels — 12 стр.
ISO 9328-4:2018
Действует
Steel flat products for pressure purposes -- Technical delivery conditions -- Part 4: Nickel-alloy steels with specified low temperature properties — 18 стр.
ISO 9329-2:1997
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Unalloyed and alloyed steels with specified elevated temperature properties — 28 стр.
ISO 9329-4:1997
Действует
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels — 32 стр.
ISO 9725:2017
Действует
ПNickel and nickel alloy forgings — 24 стр.
ISO 16330:2003
Действует
Reciprocating positive displacement pumps and pump units -- Technical requirements — 28 стр.
BS EN 953:1997+A1:2009
Заменен
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards — 36 стр.
BS EN 1561:1997
Заменен
Founding. Grey cast irons — 22 стр.
BS EN 10028-7:2016
Действует
Flat products made of steels for pressure purposes. Stainless steels — 56 стр.
BS EN 10083-1:2006
Заменен
Steels for quenching and tempering. General technical delivery conditions — 28 стр.
BS EN 10088-3:2014
Действует
Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes — 78 стр.
BS EN 10095:1999
Действует
Heat resisting steels and nickel alloys — 30 стр.
BS EN 10250-4:2000
Действует
Open steel die forgings for general engineering purposes. Stainless steels — 22 стр.
BS EN 10269:1999+A1:2006
Заменен
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties — 42 стр.
ISO 14120:2002
Заменен
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards — 32 стр.
BS EN 15632-2:2010
Действует
District heating pipes. Pre-insulated flexible pipe systems. Bonded plastic service pipes. Requirements and test methods — 14 стр.
BS EN 10028-2:2017
Действует
Flat products made of steels for pressure purposes. Non-alloy and alloy steels with specified elevated temperature properties — 32 стр.
BS EN 10028-3:2017
Действует
Flat products made of steels for pressure purposes. Weldable fine grain steels, normalized — 20 стр.
BS EN 10083-2:2006
Заменен
Steels for quenching and tempering. Technical delivery conditions for non alloy steels — 40 стр.
BS EN 10088-2:2014
Действует
Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes — 60 стр.
BS EN 10208-1:2009
Заменен
Steel pipes for pipelines for combustible fluids. Technical delivery conditions. Pipes of requirement class A — 46 стр.
BS EN 10222-2:2017
Действует
Steel forgings for pressure purposes. Ferritic and martensitic steels with specified elevated temperatures properties — 30 стр.
BS EN 10222-5:2017
Действует
Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic stainless steels — 32 стр.
BS EN 13835:2012
Действует
Founding. Austenitic cast irons — 38 стр.
BS EN 10272:2016
Действует
Stainless steel bars for pressure purposes — 42 стр.
BS EN 10273:2016
Действует
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties — 34 стр.
BS EN 10283:2010
Заменен
Corrosion resistant steel castings — 20 стр.
BS EN 12451:2012
Действует
Copper and copper alloys. Seamless, round tubes for heat exchangers — 24 стр.
API Std 614:2008
Заменен
Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries, Fifth Edition (ISO 10438:2008, Modified), Includes Errata (2008) — 202 стр.
API Std 618:2007 (R2016)
Действует
Reciprocating Compressors for Petroleum, Chemical, and Gas Industry Services, Fifth Edition, Includes Errata 1 and 2 (2009 and 2010) — 190 стр.
API STD 675:1994
Заменен
Positive Displacement Pumps-Controlled Volume, 2nd Edition — 41 стр.
ASME B1.20.1-1983
Доступна более новая редакция
Pipe Threads, General Purpose, Inch (B1.20.1 - 1983) — 23 стр.
ASTM A194/A194M-17a
Заменен
Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both — 13 стр.
ASTM A216/A216M-18
Заменен
Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service — 4 стр.
ASTM A217/A217M-14
Заменен
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service — 5 стр.
ASTM A240/A240M-17
Заменен
Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications — 15 стр.
ASTM A278/A278M-01(2015)
Заменен
Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) — 4 стр.
ASTM A307-14e1
Заменен
Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 ;000 PSI Tensile Strength — 6 стр.
ASTM A312/A312M-18a
Заменен
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes — 13 стр.
ASTM A434/A434M-18
Заменен
Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered — 4 стр.
ASTM A436-84(2015)
Заменен
Standard Specification for Austenitic Gray Iron Castings — 5 стр.
ASTM A439/A439M-18
Заменен
Standard Specification for Austenitic Ductile Iron Castings — 7 стр.
ASTM A473-18a
Заменен
Standard Specification for Stainless Steel Forgings — 6 стр.
ASTM A479/A479M-18
Заменен
Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels — 8 стр.
ASME B31.3-2002
Доступна более новая редакция
Process Piping (B31.3 - 2002) — 344 стр.
ASTM A484/A484M-18
Заменен
Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings — 13 стр.
ASTM A1057/A1057M-08(2014)
Заменен
Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process — 3 стр.
ASTM A1063/A1063M-17
Заменен
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process — 11 стр.
ASTM A182/A182M-18a
Заменен
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service — 16 стр.
ASTM A193/A193M-17
Заменен
Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications — 13 стр.
ASTM A266/A266M-18
Заменен
Standard Specification for Carbon Steel Forgings for Pressure Vessel Components — 5 стр.
ASTM A276/A276M-17
Заменен
Standard Specification for Stainless Steel Bars and Shapes — 8 стр.
ASTM A320/A320M-18
Заменен
Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service — 8 стр.
ASTM A351/A351M-18
Заменен
Standard Specification for Castings, Austenitic, for Pressure-Containing Parts — 7 стр.
ASTM A352/A352M-18
Заменен
Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service — 6 стр.
ASTM A536-84(2014)
Заменен
Standard Specification for Ductile Iron Castings — 6 стр.
ASTM A582/A582M-12(2017)
Заменен
Standard Specification for Free-Machining Stainless Steel Bars — 4 стр.
ASTM A790/A790M-18
Заменен
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe — 10 стр.
ASTM B111/B111M-18a
Заменен
Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock — 12 стр.
ASTM B164-03(2014)
Заменен
Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire — 9 стр.
ASTM B564-17a
Заменен
Standard Specification for Nickel Alloy Forgings — 11 стр.
ASTM A487/A487M-14e1
Заменен
Standard Specification for Steel Castings Suitable for Pressure Service — 6 стр.
ASTM A515/A515M-17
Заменен
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service — 3 стр.
ASTM A516/A516M-17
Действует
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service — 4 стр.
ASTM A563-15
Заменен
Standard Specification for Carbon and Alloy Steel Nuts — 9 стр.
ASTM A576-17
Заменен
Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality — 6 стр.
ASTM A696-17
Заменен
Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components — 3 стр.
ASTM A743/A743M-17
Заменен
Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application — 8 стр.
ASTM A705/A705M-17
Заменен
Standard Specification for Age-Hardening Stainless Steel Forgings — 8 стр.
ASTM A890/A890M-18a
Действует
Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application — 5 стр.
ASTM B446-03(2014)
Заменен
Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar — 5 стр.