Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Standard tolerances for non-hydraulic systems— 20 стр.
Aerospace fluid systems. O-rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Close tolerances for hydraulic systems— 22 стр.
Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screws. Flange connectors for use at pressures of 35 MPa (350 bar) to 40 MPa (400 bar), DN 13 to DN 51— 28 стр.
Hydraulic fluid power. Flange connectors with split or one-piece flange clamps and metric or inch screws. Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127— 28 стр.
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) (ISO 1179-3:2007); German version EN ISO 1179-3:2008— 19 стр.
Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa) (IEC 61518:2001); German version EN 61518:2001 + Corrigendum:2002— 13 стр.
Aerospace series - Pipe coupling - O-rings in rubber NBR, 75 IRHD, Temperature range: - 55 °C to 135 °C; German and English version EN 3663:2001 + AC:2003— 18 стр.
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993)— 9 стр.
Ports and stud ends with ISO 261 threads and O-ring sealing - Part 2: Heavy duty (S series) stud ends - Dimensions, design, test methods and requirements (ISO 6149-2:1993)— 9 стр.
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends (ISO 6149-3:2006); German version EN ISO 6149-3:2007— 18 стр.
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends (ISO 6149-2:2006); German version EN ISO 6149-2:2007— 16 стр.
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:1999); German version EN ISO 10432:1999— 81 стр.
Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004); English version EN ISO 10432:2004— 82 стр.
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006); English version EN ISO 15136-2:2006— 55 стр.
Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2001); German version EN ISO 14310:2001; German and English texts— 59 стр.
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2001); German version EN ISO 16070:2001 (German and English text)— 31 стр.
Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005); English version EN ISO 16070:2005— 30 стр.
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76— 30 стр.
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76— 30 стр.
Petroleum and natural gas industries. Drilling and production equipment. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels— 50 стр.
Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws. Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127— 30 стр.
