Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN ISO 12151-3:2012-08

Действует
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) — 16 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

BS ISO 1436:2009
Заменен
Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types for oil-based or water-based fluids. Specification — 22 стр.
DIN ISO 6162-1:2006-02
Отменен
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 1: Flange connectors for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 (ISO 6162-1:2002 + Cor. 1:2004) — 23 стр.
DIN ISO 6162-2:2006-02
Отменен
Hydraulic fluid power - Flange connectors with split or one-piece flange clamps and metric or inch screws - Part 2: Flange connectors for use at pressures of 35 MPa (350) to 40 MPa (400 bar), DN 13 to DN 51 (ISO 6162-2:2002) — 23 стр.
BS ISO 6605:2002
Заменен
Hydraulic fluid power. Hoses and hose assemblies. Test methods — 20 стр.
ÖNORM EN ISO 9227:2012-08
Заменен
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2012)
DIN EN ISO 19879:2011-01
Отменен
Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010); German version EN ISO 19879:2010 — 28 стр.
BS ISO 4079:2009
Заменен
Rubber hoses and hose assemblies. Textile-reinforced hydraulic types for oil-based or water-based fluids. Specification — 22 стр.
BS ISO 4397:2011
Действует
Fluid power connectors and associated components. Nominal outside diameters of tubes and nominal hose sizes — 12 стр.
BS ISO 5598:2008
Действует
Fluid power systems and components. Vocabulary — 194 стр.
DIN ISO 12151-3:2004-01
Отменен
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999) — 17 стр.
DIN ISO 12151-3:2011-09
Отменен
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010)

На этот документ ссылаются

DIN ISO 12151-3:2004-01
Отменен
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162 flange ends (ISO 12151-3:1999) — 17 стр.
DIN 20066:2017-11
Отменен
Hydraulic fluid power - Hose assemblies - Dimensions, requirements — 28 стр.
DIN 20066:2018-03
Действует
Hydraulic fluid power - Hose assemblies - Dimensions, requirements — 29 стр.