Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003— 20 стр.
Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain relative humidity at constant value (ISO 483:1988); German version EN ISO 483:1999— 9 стр.
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003— 12 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004); German version EN ISO 1183-1:2004— 14 стр.
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000); German version EN ISO 179-1:2000— 19 стр.
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:1985); German version EN ISO 868:1997— 6 стр.
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999); German version EN ISO 175:2000— 15 стр.
Testing of plastics films and textile fabrics (excluding nonwovens), coated or not coated fabrics - Determination of stiffness in bending - Method according to Cantilever— 9 стр.
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999— 10 стр.
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003); German version EN ISO 7823-1:2003— 19 стр.
Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990); German version EN ISO 7822:1999— 10 стр.
Plastics - Determination of environmental stress cracking (ESC) - Constant-tensile-stress method (ISO 6252:1992); German version EN ISO 6252:1997— 11 стр.
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000); German version EN ISO 6603-1:2000— 17 стр.
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003); German version EN ISO 7823-2:2003— 20 стр.
Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:1994, including Technical Corrigendum 1:1997); German version EN ISO 5659-2:1998— 25 стр.
Plastic - Poly(methyl methacrylate) sheet; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1998); German version EN ISO 7823-1:2000— 13 стр.
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 6402-2:1999— 10 стр.
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001— 19 стр.
Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000— 11 стр.
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999— 12 стр.
Plastics - Determination of environmental stress cracking (ESC) - Ball or pin impression method (ISO 4600:1992); German version EN ISO 4600:1997 — 10 стр.
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997); German version EN ISO 2898-2:1999— 8 стр.
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994); German version EN ISO 2580-2:1999— 10 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999— 9 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998); German version EN ISO 10350-1:2000— 17 стр.
Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994); German version EN ISO 10366-2:1999— 11 стр.
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:1996); German version EN ISO 9163:1998— 13 стр.
Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003); German version EN ISO 9142:2003— 35 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001— 16 стр.
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998); German version EN ISO 9773:1998— 9 стр.
Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003— 18 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995); German version EN ISO 12086-2:1999— 36 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995); German version EN ISO 11403-2:1999— 9 стр.
Plastics - Simple heat release test using a conical radiant heater and a thermopile detector (ISO 13927:2001); German version EN ISO 13927:2003— 26 стр.
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998); German version EN ISO 11542-2:1998— 13 стр.
Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993); German version EN ISO 11248:1999— 6 стр.
Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999); German version EN ISO 11403-3:2001— 19 стр.
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999— 9 стр.
Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ± 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997— 12 стр.
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999— 12 стр.
Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997— 12 стр.
Fibre-reinforced plastic composites - Determination of compressive properties in the in-plane direction (ISO 14126:1999); German version EN ISO 14126:1999— 17 стр.
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999— 12 стр.
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999— 12 стр.
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999— 12 стр.
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999— 12 стр.
Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999— 12 стр.
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air, oven method (ISO 4577:1983); German version EN ISO 4577:1999— 8 стр.
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999— 10 стр.
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995); German version EN ISO 1163-2:1999— 7 стр.
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995); German version EN ISO 1622-2:1999— 9 стр.
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2000)— 7 стр.