Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN ISO 4759-1:1980-05

Отменен
Tolerances for fasteners - Part 1, bolts, screws and nuts with thread diameters <grцЯer => 1,6 <kleiner => 150 mm and product grades A, B and C — 18 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN EN ISO 4759-1:2001-04
Действует
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 — 65 стр.
DIN 267-2:1968-04
Отменен
Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Technical Conditions of Delivery; Types and Dimensional Accuracy — 16 стр.

На этот документ ссылаются

DIN 80705:1990-08
Отменен
Thin nuts with coarse pitch and fine pitch thread and with small widths across flats — 3 стр.
DIN 46262-2:1988-09
Действует
Low-voltage stud-terminals; bushing studs — 3 стр.
DIN 46266-2:1988-06
Действует
High-voltage feed-through terminals; bushing studs — 3 стр.
DIN 86056:2001-04
Отменен
Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys — 6 стр.
DIN 86056:1988-05
Отменен
Conduits pipes with sleeve nut and gasket for steel tubes and tubes of copper or copper alloys — 6 стр.
DIN 95367:1998-11
Действует
Elastomer mounts - Roof mounts, types A and B — 4 стр.
DIN 95364:1994-07
Действует
Elastomer mounts; buffer, types A to G — 6 стр.
DIN 95365:1997-06
Действует
Elastomer mounts - Hat mounts - Types A to K — 11 стр.
DIN 95369:1998-08
Действует
Elastomer mounts - Cap mounts type A — 5 стр.
DIN 95362:1996-09
Действует
Elastomer mounts, hollow-prismatic — 5 стр.
DIN 95363:1994-07
Действует
Elastomer mounts; stud mounts; types A to F — 6 стр.
DIN 95366:1996-04
Действует
Elastomer mounts - Pot bearings and fail safe pot bearings, types A to G — 9 стр.
DIN 43165:1985-03
Действует
Electric traction; screws with cup point for overhead fittings — 2 стр.
DIN 18182-2:1987-01
Отменен
Accessories for use with gypsum plasterboards; dry wall screw — 5 стр.
DIN ISO 6149-2:1996-11
Отменен
Ports and stud ends with ISO 261 threads and O-ring sealing - Part 2: Heavy duty (S series) stud ends - Dimensions, design, test methods and requirements (ISO 6149-2:1993) — 9 стр.
DIN ISO 3269:1992-12
Отменен
Fasteners; acceptance inspection; identical with ISO 3269:1988 — 9 стр.
DIN ISO 6149-3:1996-11
Отменен
Connections for fluid power and general use - Ports and stud ends with ISO 261 threads and O-ring sealing - Part 3: Light duty (L series) stud ends; dimensions, design, test methods and requirements (ISO 6149-3:1993) — 9 стр.
DIN ISO 13754:2000-12
Отменен
Textiles machinery and accessories - Hexagon nuts and slotted nuts for spinning and twisting spindles (ISO 13754:1999) — 5 стр.
DIN ISO 8764-2:2000-12
Отменен
Screwdrivers for cross-recessed head screws - Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers (ISO 8764-2:1992) — 5 стр.
DIN ISO 10958-2:2000-09
Отменен
Snowboards - Binding mounting area - Part 2: Requirements and test methods for snowboards with inserts (ISO 10958-2:1999) — 6 стр.
DIN ISO 8992:1992-12
Отменен
Fasteners; general requirements for bolts, screws, studs and nuts; identical with ISO 8992:1986 — 3 стр.
DIN 2509:1986-09
Отменен
Double end studs — 4 стр.
DIN 22425:1990-03
Отменен
Triangular nuts for use with electrical equipment in mining — 4 стр.
DIN 20635:2001-05
Действует
Monorails for mining - Suspensions shackles — 7 стр.
DIN 22424:1990-03
Отменен
Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts — 5 стр.
DIN 20633:2002-04
Действует
Overhead monorail installations for mining - Double-end fork turnbuckles — 8 стр.
DIN 21547:1988-01
Отменен
Round head bolts with oval shoulder for mine supports — 2 стр.
DIN 20635:1990-10
Отменен
Monorails for mining; suspensions shackles — 4 стр.
DIN 22424:1989-04
Отменен
Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts — 5 стр.
DIN 22425:1989-04
Отменен
Electrical apparatus for potentially explosive atmospheres for mining; triangular nuts — 4 стр.
DIN 25202:1992-04
Отменен
Railway vehicles; securing of bolted joints; initial stressing forces and tightening torques — 11 стр.
DIN 28129:1990-03
Отменен
Clamp nuts; for covers — 2 стр.
DIN 32500-2:1991-06
Отменен
Studs for drawn arc stud welding; unthreaded studs, ferrules — 3 стр.
DIN 32500-6:1994-01
Отменен
Studs for drawn arc stud welding; threaded studs with reduced shaft, ferrules — 3 стр.
DIN 32501-1:1991-07
Отменен
Studs for stud welding with tip ignition; threaded studs — 3 стр.
DIN 32500-1:1991-06
Отменен
Studs for drawn arc stud welding; threaded studs, ferrules — 4 стр.
DIN 32501-2:1991-07
Отменен
Studs for stud welding with tip ignition; unthreaded studs — 3 стр.
DIN 32500-5:1991-06
Отменен
Studs for drawn arc stud welding; threaded studs with shoulder, short cycle processes — 3 стр.
DIN 32501-5:1986-08
Отменен
Studs for stud welding with tip ignition; studs with internal thread for automatic feed — 2 стр.
DIN EN ISO 8434-1:1997-11
Отменен
Metallic tube connections for fluid power and general use - Part 1: 24° compression fittings (ISO 8434-1:1994); German version EN ISO 8434-1:1997 — 52 стр.
DIN EN ISO 10511:1998-02
Отменен
Prevailing torque type hexagon, thin nuts (with non-metallic insert) (ISO 10511:1997); German version EN ISO 10511:1997 — 6 стр.
DIN EN ISO 8434-4:2000-09
Отменен
Metallic tube connections for fluid power and general use - Part 4: 24° cone connectors with O-ring weld-on nipples (ISO 8434-4:1995); German version EN ISO 8434-4:2000 — 36 стр.
DIN EN 1663:1998-02
Действует
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997 — 7 стр.
DIN EN 24014:1992-02
Отменен
Hexagon head bolts - Product grades A and B (ISO 4014:1988); German version EN 24014:1991 — 13 стр.
DIN EN 24032:1992-02
Отменен
Hexagon nuts, Style 1 - Product grades A and B (ISO 4032:1986); German version EN 24032:1991 — 6 стр.
DIN EN 24016:1992-02
Отменен
Hexagon head bolts - Product grade C (ISO 4016:1988); German version EN 24016:1991 — 9 стр.
DIN EN 24035:1992-02
Отменен
Hexagon thin nuts (chamfered) - Product grades A and B (ISO 4035:1986); German version EN 24035:1991 — 6 стр.
DIN EN 24033:1991-12
Отменен
Style 2 hexagon nuts - Product grades A and B (ISO 4033:1979); German version EN 24033:1991 — 5 стр.
DIN EN 24036:1992-02
Отменен
Hexagon thin nuts - Product grade B (unchamfered) (ISO 4036:1979); German version EN 24036:1991 — 4 стр.
DIN EN 24015:1991-12
Отменен
Hexagon head bolts with reduced shank (shank diameter <ca> pitch diameter); product grade B (ISO 4015:1979); german version EN 24015:1991 — 8 стр.
DIN EN 24766:1992-10
Отменен
Slotted set screws with flat point (ISO 4766:1983); german version EN 24766:1992 — 6 стр.
DIN EN 24034:1992-02
Отменен
Hexagon nuts - Product grade C (ISO 4034:1986); German version EN 24034:1991 — 6 стр.
DIN EN 24017:1992-02
Отменен
Hexagon head screws - Product grades A and B (ISO 4017:1988); German version EN 24017:1991 — 9 стр.
DIN EN 24018:1992-02
Отменен
Hexagon head screws - Product grade C (ISO 4018:1988); German version EN 24018:1991 — 8 стр.
DIN EN ISO 2010:1994-10
Отменен
Slotted raised countersunk head screws (common head style) - Product grade A (ISO 2010:1994); German version EN ISO 2010:1994 — 8 стр.
DIN EN ISO 4759-1:2001-04
Действует
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 — 65 стр.
DIN EN ISO 2009:1994-10
Отменен
Slotted countersunk flat head screws (common head style) - Product grade A (ISO 2009:1994); German version EN ISO 2009:1994 — 8 стр.
DIN 7500-1:1995-08
Отменен
Thread rolling screws for ISO metric thread - Part 1: Dimensions, requirements, testing — 8 стр.
DIN 6331:1991-08
Отменен
Hexagon collar nuts with a height of 1,5 d — 2 стр.
DIN 6928:1990-11
Отменен
Hexagon washer head tapping screws — 2 стр.
DIN 6927:1983-11
Отменен
Prevailing torque type all-metal nuts with flange — 3 стр.
DIN 6332:1993-08
Отменен
Grub screws with thrust point — 4 стр.
DIN 7985:1984-12
Отменен
Cross recessed raised cheese head screws — 5 стр.
DIN 6923:1983-06
Отменен
Hexagon nuts with flange — 4 стр.
DIN 6926:1983-11
Отменен
Prevailing torque type hexagon nuts with flange and with non-metallic insert — 3 стр.
DIN 7972:1990-08
Отменен
Slotted countersunk head tapping screws — 3 стр.
DIN 7985:1986-07
Отменен
Cross recessed raised cheese head screws — 5 стр.
DIN 6379:1991-08
Отменен
Studs for use with tee nuts — 2 стр.
DIN 7971:1988-03
Отменен
Slotted pan head tapping screws — 3 стр.
DIN 6924:1987-07
Отменен
Prevailing torque type hexagon nuts with nonmetallic insert — 4 стр.
DIN 7513:1995-09
Отменен
Thread cutting screws - Hexagon screws and slotted head screws - Dimensions, requirements, testing — 5 стр.
DIN 7516:1995-09
Отменен
Thread cutting screws - Cross recessed head screws - Dimensions, requirements, testing — 5 стр.
DIN 7999:1982-03
Отменен
High strength hexagon fitting bolts; with large widths across flats for structural steelwork — 5 стр.
DIN 6303:1986-11
Отменен
Knurled nuts — 3 стр.
DIN 6922:1983-06
Отменен
Hexagon flange bolts with reduced shank — 6 стр.
DIN 6915:1989-10
Отменен
High-strength hexagon nuts with large widths across flats for structural steel bolting — 3 стр.
DIN 7991:1986-01
Отменен
Hexagon socket countersunk head cap screws — 6 стр.
DIN 7604:1992-01
Отменен
Light-duty hexagon head screw plugs — 3 стр.
DIN 7996:1986-12
Отменен
Cross recessed pan head wood screws — 2 стр.
DIN 5903-2:1997-11
Отменен
Fish bolts - Part 2: With square head — 6 стр.
DIN 7984:1985-05
Отменен
Hexagon socket thin head cap screws — 6 стр.
DIN 7973:1990-08
Отменен
Slotted raised countersunk head tapping screws — 3 стр.
DIN 6912:1985-05
Отменен
Hexagon socket thin head cap screws with pilot recess for wrench key — 7 стр.
DIN 7981:1984-12
Отменен
Cross recessed pan head tapping screws — 4 стр.
DIN 6925:1987-07
Отменен
Prevailing torque type all-metall hexagon nuts — 4 стр.
DIN 6330:1991-08
Отменен
Hexagon nuts with a height of 1,5 d — 2 стр.
DIN 7996:1984-12
Отменен
Cross recessed pan head wood screws — 3 стр.
DIN 7516:1986-11
Отменен
Cross recessed head thread cutting screws; dimensions, requirements, testing — 4 стр.
DIN 7976:1990-08
Отменен
Hexagon head tapping screws — 3 стр.
DIN 7991:1985-05
Отменен
Hexagon socket countersunk head screws — 6 стр.
DIN 7973:1988-03
Отменен
Slotted raised countersunk (oval) head tapping screws — 3 стр.
DIN 7500-1:1984-12
Отменен
Thread rolling screws for ISO metric thread; dimensions, requirements, testing — 6 стр.
DIN 6925:1983-11
Отменен
Prevailing torque type hexagon nuts; all-metal nuts — 4 стр.
DIN 7981:1990-08
Отменен
Cross recessed pan head tapping screws — 4 стр.
DIN 6914:1989-10
Отменен
High-strength hexagon head bolts with large widths across flats for structural steel bolting — 6 стр.
DIN 7990:1989-10
Отменен
Hexagon head bolts for structural steel bolting for supply with nut — 6 стр.
DIN 7964:1990-07
Отменен
Reduced shank bolts and screws with coarse thread — 6 стр.
DIN 7982:1984-12
Отменен
Cross recessed raised countersunk head tapping screws — 5 стр.
DIN 7964:1988-03
Отменен
Bolts and screws with ISO metric thread and reduced shank — 6 стр.
DIN 7972:1988-03
Отменен
Slotted countersunk (flat) head tapping screws — 3 стр.