Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 53452:1977-04

Отменен
Testing of Plastics; Flexural Test — 5 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 50014:1985-07
Отменен
Climates and their technical application; standard atmospheres — 2 стр.
DIN 53435:1983-07
Отменен
Testing of plastics; bending test and impact test on dynstat test pieces — 4 стр.
DIN 53598-1:1983-07
Отменен
Statistical evaluation at off-hand samples with examples from testing of rubbers and plastics — 12 стр.
DIN EN ISO 178:1997-02
Отменен
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 — 9 стр.
DIN 53453:1975-05
Отменен
Testing of Plastics; Impact Flexural Test — 5 стр.

На этот документ ссылаются

DIN 7708-2:1975-10
Отменен
Types of Plastic Moulding Materials; Phenolic Moulding Materials — 9 стр.
DIN 7748-2:1979-07
Отменен
Plastic Moulding Materials; Unplasticized Polyvinyl Chloride (PVC-U) Moulding Materials; Determination of Properties — 4 стр.
DIN 7708-3:1975-10
Отменен
Types of Plastic Moulding Materials; Aminoplastic Moulding Materials, Aminoplastic/Phenolic Moulding Materials — 9 стр.
DIN 7708-4:1983-01
Отменен
Types of plastics moulding compounds; Moulding compounds for cold moulding — 6 стр.
DIN 7741-2:1977-08
Отменен
Plastic moulding materials; Polystyrene (PS) moulding materials; Determination of properties — 4 стр.
DIN 7744-2:1980-01
Отменен
Plastic moulding materials; polycarbonate (PC) moulding materials, determination of properties — 6 стр.
DIN 7742-2:1981-08
Отменен
Plastic moulding materials; cellulose ester moulding materials; determination of properties — 6 стр.
DIN 7745-2:1980-01
Отменен
Plastic moulding materials; polymethyl methacrylate (PMMA) moulding materials, determination of properties — 5 стр.
DIN 16946-1:1989-03
Действует
Cured casting resins; testing — 6 стр.
DIN 16964:1988-11
Действует
Wound glass fibre reinforced polyester resins (UP-GF) pipes; general quality requirements and testing — 4 стр.
DIN 16966-1:1988-11
Действует
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing — 4 стр.
DIN 16911:1978-01
Отменен
Plastic Moulding Materials; Polyester Resin Moulding Materials; Types; Requirements; Testing — 7 стр.
DIN 16869-2:1986-11
Отменен
Centrifugally cast filled glass fibre reinforced unsaturated polyester (UP-GF) resin pipes; general quality requirements, testing — 5 стр.
DIN 16966-1:1982-07
Отменен
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Fittings; General quality requirements, Testing — 5 стр.
DIN 16964:1982-07
Отменен
Wound glass fibre reinforced polyester resin (UP-GF); pipes, General quality requirements, Testing — 5 стр.
DIN 16927-2:1977-04
Отменен
Sheets of rigid polyvinylchloride (rigid PVC), raised impact strength, high impact strength; technical delivery specifications — 3 стр.
DIN 16773-2:1985-01
Отменен
Plastic moulding materials; polyamide(PA) homopolymers for moulding and extrusion; preparation of test specimens; determination of properties — 5 стр.
DIN 16772-2:1977-08
Отменен
Plastic moulding materials; acrylonitrile/butadiene/styrene (ABS) moulding materials, determination of properties — 4 стр.
DIN 16913-2:1981-04
Отменен
Plastics; moulding materials; reinforced thermosetting moulding materials; prepreg; determination of properties of standardized test specimens — 5 стр.
DIN 16774-2:1978-04
Отменен
Plastic moulding materials; polypropylene (PP) moulding materials, determination of properties — 4 стр.
DIN 16927-1:1977-04
Отменен
Sheets of rigid polyvinylchloride (rigid PVC), normal impact strength; technical delivery specifications — 3 стр.
DIN 16778-2:1980-05
Отменен
Plastic moulding materials; ethylene vinylacetate copolymer (EVA) moulding materials, determination of properties — 5 стр.
DIN 16869-2:1995-12
Отменен
Centrifugally cast filled glass fibre reinforced unsaturated polyester resin (UP-GF) pipes - Part 2: General quality requirements, testing — 6 стр.
DIN 16775-2:1977-08
Отменен
Plastic moulding materials; styrene/acrylonitrile (SAN) moulding materials, determination of properties — 4 стр.
DIN 16944:1973-10
Отменен
Glass reinforced reaction resin moulding materials in the moulded state; test methods — 3 стр.
DIN 16777-2:1981-06
Отменен
Plastic moulding materials; acrylonitrile styrene acrylicester (ASA) moulding materials; determination of properties — 4 стр.
DIN 16771-2:1977-08
Отменен
Plastic moulding materials; styrene/butadiene (SB) moulding materials, determination of properties — 3 стр.
DIN 30820-2:1991-02
Отменен
Transportation chain with containers for small pieces; small load carrier system (KLT-system); small load carriers and trays; requirements and tests — 5 стр.
DIN EN ISO 178:1997-02
Отменен
Plastics - Determination of flexural properties (ISO 178:1993); German version EN ISO 178:1996 — 9 стр.
DIN 65498:1991-10
Действует
Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification — 18 стр.
DIN 65065:1979-08
Действует
Aerospace; resins for fiber reinforced, technical specification — 7 стр.
DIN 53458:1968-07
Отменен
Testing of Plastics; Determination of Dimensional Stability under Heat by Martens Method — 2 стр.
DIN 53393:1976-03
Отменен
Testing of Textile Glass-reinforced Plastics; Behaviour to the Effect of Chemicals — 4 стр.
DIN 53739:1984-11
Отменен
Testing of plastics; influence of fungi and bacteria; visual evaluation; change in mass or physical properties — 11 стр.
DIN 53449:1970-09
Отменен
Testing of Plastics; Evaluation of Resistance of Thermoplastics to Environmental Stress Cracking; Steel Ball Impression Method — 5 стр.
DIN 53769-5:1989-04
Отменен
Testing of glass fibre reinforced plastics pipes; determination of chemical resistance of pipes under compression — 4 стр.
DIN 53435:1977-04
Отменен
Testing of plastics; determination of flexural properties and impact resistance with dynstat test specimens — 3 стр.
DIN 53442:1975-08
Отменен
Testing of plastics; fatigue test in the field of bending strain at flat specimens — 4 стр.
DIN 53449-3:1984-05
Отменен
Testing of plastics; evaluation of environmental stress cracking (ESC); ben strip method — 7 стр.
DIN 53799:1975-05
Отменен
Test methods for decorative laminated sheets on basis of aminoplastic resins — 11 стр.
DIN 53487:1975-10
Отменен
Testing of plastics; determination of deflection as a function of temperature — 4 стр.
DIN 53449-1:1984-05
Отменен
Testing of plastics; evaluation of environmental stress cracking (ESC); ball or pin impression method — 9 стр.
DIN 53751:1975-01
Отменен
Testing of electrical insulating materials; determination of the resistance to ionizing radiation — 3 стр.
DIN 53799:1986-01
Отменен
Decorative laminated sheets on basis of aminoplastic resins; test method — 24 стр.
DIN 46448-1:1969-01
Отменен
Insulating Varnishes and Insulating Resin Materials for Electrical Engineering; Impregnating Resin Materials, Test Methods — 10 стр.
DIN 51290-2:1991-05
Отменен
Testing of polymer concretes (reaction resin concretes) for mechanical engineering purposes; testing of binders, fillers and reaction resin compounds — 4 стр.
DIN 52303:1976-11
Отменен
Testing of Glass; Bending Test — 2 стр.
DIN 4261-101:1997-11
Отменен
Small sewage treatment plants - Plants without aeration (septic tanks) - Part 101: Principles for factory production control and third party control — 6 стр.
DIN 4261-101:1998-02
Отменен
Small sewage treatment plants - Plants without aeration (septic tanks) - Part 101: Principles for factory production control and third party control — 6 стр.
DIN 19565-1:1989-03
Отменен
Centrifugally cast and filled polyester resin glass fibre reinforced (UP-GF) pipes and fittings for buried drains and sewers; dimensions and technical delivery conditions — 24 стр.
DIN 19537-2:1983-10
Отменен
High density polyethylene (HDPE) pipes and fittings for drains and sewers; technical delivery conditions — 8 стр.
DIN 19537-2:1988-01
Отменен
High-density polyethylene (HDPE) pipes and fittings for drains and sewers; technical delivery conditions — 8 стр.
DIN 28054-3:1994-06
Отменен
Chemical apparatus; organic coatings on metal components; trowel applied coatings — 7 стр.
DIN 28054-2:1992-01
Отменен
Chemical apparatus; organic coatings on metal components; laminate coatings — 7 стр.
DIN 28054-4:1995-10
Отменен
Chemical apparatus - Organic coatings on metal components - Part 4: Spray applied coatings — 8 стр.
DIN 28090-3:1995-09
Отменен
Static gaskets for flange connections - Part 3: Gaskets made from sheets; chemical resistance test procedures — 4 стр.
DIN 40802-1:1976-02
Отменен
Metal-clad base materials for printed circuits; test methods — 11 стр.
DIN 16944:1988-07
Отменен
Glass fibre reinforced reaction resin moulding materials; test methods — 4 стр.
DIN 65321:1989-11
Отменен
Aerospace; acrylic sheets, panes and moulded parts; technical specification — 17 стр.