Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification (IEC 61076-1:1995); German version EN 61076-1:1995— 15 стр.
Connectors for use in d.c., low frequency analogue and digital high-speed data applications - Part 5: In-line sockets with assessed quality; Sectional specification (IEC 61076-5:2001); German version EN 61076-5:2001— 31 стр.
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 4: Printed board connectors; section 001: Blank detail specification (IEC 61076-4-001:1996); German version EN 61076-4-001:1996— 64 стр.
Connectors for electronic equipment - Part 4-107: Printed board connectors with assessed quality; Detail specification for shielded two-part connectors having a basic grid of 2,0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations (IEC 61076-4-107:2001); German version EN 61076-4-107:2001— 50 стр.
Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high speed data applications - Part 1: Generic specification (IEC 61076-1:1995 + A1:1996 + A2:2001); German version EN 61076-1:1995 + A1:1996 + A2:2001— 38 стр.
Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999)— 8 стр.
Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986— 13 стр.
Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series— 12 стр.
Technical drawings; method of indicating surface texture on drawings, comparison of surface symbols according to DIN 3141 and indications DIN ISO 1302— 3 стр.
Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connectors (ISO 5599-1:1989)— 8 стр.
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997— 6 стр.
Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999); German version EN ISO 14660-2:1999— 11 стр.
Determination of surface roughness parameters R<(Index)K>, R<(Index)PK>, R<(Index)VK>, M<(Index)r1>, M<(Index)r2> serving to describe the material component of the roughness profile— 5 стр.
Welding and allied processes - Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces (ISO 9013:1992); German version EN ISO 9013:1995— 8 стр.
Pressure gauges - Part 3: Diaphragm and capsule pressure gauges; dimensions, metrology, requirements and testing; German version EN 837-3:1996— 20 стр.
Impact absorbing playground surfacing - Safety requirements and test methods (includes Amendment A1:2001); German version EN 1177:1997 + A1:2001— 18 стр.
Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996); German version EN ISO 4288:1997— 11 стр.
