Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 1587:2000-10

Отменен
Hexagon domed cap nuts, high type — 5 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 76-1:1983-12
Отменен
Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13 — 5 стр.
DIN 267-2:1984-11
Отменен
Fasteners; technical delivery conditions; design and dimensional accuracy — 4 стр.
DIN 267-10:1988-01
Отменен
Fasteners; technical delivery conditions; hot-dip galvanized parts — 5 стр.
DIN 4930:2007-07
Отменен
Pipes for use in freezing shaft sinking - Dimensions and technical delivery conditions
DIN 4000-2:1999-12
Отменен
Tabular layouts of article - Part 2: Characteristics for screws and nuts — 48 стр.
DIN EN 20898-2:1994-02
Отменен
Mechanical properties of fasteners; part 2: nuts with specified proof load values; coarse thread (ISO 898-2:1992); German version EN 20898-2:1993 — 16 стр.
DIN EN 28839:1991-12
Действует
Mechanical properties of fasteners; nonferrous metal bolts, screws, studs and nuts (ISO 8839:1986); german version EN 28839:1991 — 8 стр.
DIN EN ISO 898-6:1996-02
Отменен
Mechanical properties of fasteners - Part 6: Nuts with specified proof load values; fine pitch thread (ISO 898-6:1994); German version EN ISO 898-6:1995 — 10 стр.
DIN EN ISO 3269:2000-11
Отменен
Fasteners - Acceptance inspection (ISO 3269:2000); English version of DIN EN ISO 3269 — 22 стр.
DIN EN ISO 3506-2:1998-03
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:1997); German version EN ISO 3506-2:1997 — 16 стр.
DIN EN ISO 4042:1999-10
Отменен
Fasteners - Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 — 26 стр.
DIN EN ISO 4759-1:2001-04
Действует
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000 — 65 стр.
DIN EN ISO 10683:2011-03
Отменен
Fasteners - Non-electrolytically applied zinc flake coatings (ISO/DIS 10683:2011); German version prEN ISO 10683:2011
DIN ISO 8992:1992-12
Отменен
Fasteners; general requirements for bolts, screws, studs and nuts; identical with ISO 8992:1986 — 3 стр.
DIN 1587:2014-07
Отменен
Hexagon domed cap nuts, high type — 10 стр.
DIN 1587:2000-02
Отменен
Hexagon domed cap nuts — 5 стр.

На этот документ ссылаются

DIN 906:1973-01
Отменен
Hexagon Socket Pipe Plugs with Taper Thread — 2 стр.
DIN 1587:1987-06
Отменен
Hexagon domed cap nuts — 5 стр.
DIN 906:1983-06
Отменен
Hexagon socket pipe plugs — 4 стр.
DIN 909:1973-01
Отменен
Hexagon Head Pipe Plugs with Taper Thread — 2 стр.
DIN 1587:1977-04
Отменен
Hexagon Cap Nuts; Domed Type — 2 стр.
DIN 254:1974-06
Отменен
Conical Tapers — 9 стр.
DIN 1587:2000-02
Отменен
Hexagon domed cap nuts — 5 стр.
DIN 909:1983-06
Отменен
Hexagon head pipe plugs — 4 стр.
DIN 71412-1:1977-06
Отменен
Conical Head Lubricating Nipples with Metric Screw Thread — 4 стр.
DIN 71401-1:1972-05
Отменен
Drain cocks for internal combustion engines — 1 стр.
DIN 72759-3:1974-03
Отменен
Hydraulic stop light switches with taper thread M10 Ч 1 — 2 стр.
DIN ISO 898-6:1990-03
Отменен
Mechanical properties of fasteners; nuts with specified proof load values; fine pitch thread; identical with ISO 898-6:1988 (status as of 1989) — 9 стр.
DIN 4094-1:1974-11
Отменен
Subsoil; Dynamic and Static Penetrometers; Dimensions of Apparatus and Method of Operation — 4 стр.
DIN 3859:1984-03
Отменен
Compression couplings; technical delivery conditions — 5 стр.
DIN 3913:1984-04
Отменен
Solderless compression couplings with olive; taper stud tees (stud run) — 3 стр.
DIN 3852-1:1992-02
Отменен
Stud ends and tapped holes, with metric fine pitch thread, for use with compression couplings, valves and screw plugs - Dimensions — 10 стр.
DIN 3903:1984-04
Отменен
Solderless compression couplings with olive; taper stud elbows — 3 стр.
DIN 3900:1984-04
Отменен
Solderless compression couplings with olive; compression couplings; with tapered stud end — 3 стр.
DIN 2367:1966-01
Отменен
Solderless Tube Fittings with Olive; Complete Fittings and Survey of Types — 2 стр.
DIN 3906:1984-04
Отменен
Solderless compression couplings with olive; taper stud tees (stud branch) — 3 стр.
DIN 3930:1961-11
Отменен
Non-soldered taper-bush type pipe unions for butt joints; general applications — 2 стр.
DIN 3906:1966-10
Отменен
Non-soldered taper-bush type pipe unions; T used as an adaptor with taper thread on screwed-in end for use with union nut — 2 стр.
DIN 3933:1965-12
Отменен
Non-soldered taper-bush type pipe unions; elbow used as an adaptor for butt joints with taper thread on screwed-in end for use with union nuts — 2 стр.
DIN 3936:1965-12
Отменен
Non soldered taper-bush type pipe unions; T used as an adaptor for butt joints with taper thread on screwed-in end for use with union nuts — 2 стр.
DIN 2369:1966-10
Отменен
Non-soldered pipe unions with double taper sleeeves; screwed sockets with tapered thread for socket unions — 1 стр.
DIN 3913:1966-10
Отменен
Non-soldered taper-bush type pipe unions; L-union used as an adaptor with taper thread on screwed-in end for use with union nut — 2 стр.
DIN 3852-2:1964-10
Отменен
Screwed plugs; tapped holes, with Whitworth pipe thread, general outlay of types — 2 стр.
DIN 2378:1966-10
Отменен
Non-soldered pipe unions with double taper sleeves; elbows used as an adaptor with taper thread — 1 стр.
DIN 2377:1966-10
Отменен
Screwed unions with double cone seals; taper thread nipples for union nuts — 1 стр.
DIN 3405:1986-05
Действует
Lubricating nipples cupped type — 2 стр.
DIN 3852-1:1978-09
Отменен
Srewed plugs, tapped holes, with metric fine pitch thread; general outlay of types — 2 стр.
DIN 3900:1966-10
Отменен
Non-soldered taper-bush type pipe unions; double ended union with taper thread on screwed-in end used as an adaptor — 1 стр.
DIN 20026:1973-09
Отменен
Scewed connections with cone 1 : 3 for hydraulic hoses — 6 стр.
DIN 25200:1986-11
Отменен
Screws; bolts and nuts for rail vehicles; summary — 11 стр.
DIN 28017-3:2003-04
Отменен
Columns and other vessels - Part 3: Vertical ladders — 9 стр.
DIN 28017-3:2012-04
Действует
Stationary accesses to process apparatus - Part 3: Vertical ladders — 19 стр.
DIN 1587:2014-07
Отменен
Hexagon domed cap nuts, high type — 10 стр.