Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 13-13:1983-10

Отменен
ISO metric screw threads; Selected sizes for screws, bolts and nuts from 1 to 52 mm screw thread diameter and limits of sizes — 6 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 13-19:1999-11
Действует
ISO general purpose metric screw threads - Part 19: Nominal profiles — 3 стр.
DIN 13-22:2005-08
Действует
ISO general purpose metric screw threads - Part 22: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 25 mm to 52 mm — 18 стр.
DIN 13-3:1999-11
Действует
ISO general purpose metric screw threads - Part 3: Nominal sizes for 0,5 mm fine pitch threads; nominal diameter from 3,5 mm to 90 mm — 6 стр.
DIN 13-4:1999-11
Действует
ISO general purpose metric screw threads - Part 4: Nominal sizes for 0,75 mm fine pitch threads; nominal diameter from 5 mm to 110 mm — 5 стр.
DIN 13-51:2005-08
Отменен
ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes — 10 стр.
DIN 13-6:1999-11
Действует
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm — 6 стр.
DIN 13-7:1999-11
Действует
ISO general purpose metric screw threads - Part 7: Nominal sizes for 2 mm fine pitch threads; nominal diameter from 17 mm to 300 mm — 6 стр.
DIN 13-8:1999-11
Действует
ISO general purpose metric screw threads - Part 8: Nominal sizes for 3 mm fine pitch threads; nominal diameter from 28 mm to 300 mm — 6 стр.
DIN 13-14:1982-08
Отменен
ISO metric screw threads; Principles for a tolerance system for screw threads from 1 mm diameter upwards — 8 стр.
DIN 13-15:1982-08
Отменен
ISO metric screw threads; Fundamental deviations and tolerances for screw threads from 1 mm diameter upwards — 6 стр.
DIN 13-27:1983-12
Отменен
ISO metric screw threads; coarse and fine screw threads from 1 to 355 mm screw thread diameter; deviations — 17 стр.
DIN ISO 262:1999-11
Действует
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) — 3 стр.
DIN ISO 965-2:1999-11
Действует
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) — 7 стр.
DIN 13-13:1972-07
Отменен
ISO Metric Screw Threads; Review of Screw Threads for Bolts and Nuts from 1 to 52 mm Screw Thread Diameter and Limiting Sizes — 6 стр.

На этот документ ссылаются

DIN 949-2:1995-07
Отменен
Studs with metric interference thread MFS - Part 2: Lengths of engagement <ca> 2,5 d (Type B) — 4 стр.
DIN 316:1983-06
Отменен
Wing screws — 4 стр.
DIN 964:1985-05
Отменен
Slotted raised countersunk (oval) head screws (with countersunk head as specified in ISO 2010-1972) — 6 стр.
DIN 964:1990-08
Отменен
Slotted raised countersunk head screws — 6 стр.
DIN 267-9:1979-08
Отменен
Mechanical Fasteners; Technical Conditions of Delivery, Components with Electroplated Coatings — 20 стр.
DIN 267-11:1980-01
Отменен
Fasteners; technical delivery conditions (with additions to ISO 3506); corrosion-resistant stainless steel fasteners — 12 стр.
DIN 966:1990-08
Отменен
Cross recessed raised countersunk head screws — 5 стр.
DIN 963:1990-08
Отменен
Slotted countersunk head screws — 6 стр.
DIN 976-2:1995-02
Отменен
Stud bolts - Part 2: Metric interference thread MFS — 4 стр.
DIN 13-12:1988-10
Отменен
ISO metric screw threads; 1 mm to 300 mm diameter coarse and fine pitch threads; selected diameters and pitches — 5 стр.
DIN 965:1990-08
Отменен
Cross recessed countersunk flat head screws — 5 стр.
DIN 315:1983-06
Отменен
Wing nuts — 3 стр.
DIN 949-1:1995-02
Отменен
Studs with metric interference thread MFS - Part 1: Lengths of engagement <ca> 2 d (Type A) — 4 стр.
DIN 967:1994-01
Отменен
Cross recessed pan head screws with collar; product grade A — 4 стр.
DIN 13-13:1972-07
Отменен
ISO Metric Screw Threads; Review of Screw Threads for Bolts and Nuts from 1 to 52 mm Screw Thread Diameter and Limiting Sizes — 6 стр.
DIN 13-20:1983-10
Отменен
ISO metric screw threads; limits of sizes for coarse screw threads within the range 1 to 68 mm nominal diameter, together with the commonly used tolerance classes — 6 стр.
DIN 963:1985-04
Отменен
Slotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972) — 6 стр.
DIN 444:1981-10
Отменен
Eyebolts — 5 стр.
DIN 85:1990-08
Отменен
Product grade A slotted pan head screws — 4 стр.
DIN 84:1990-08
Отменен
Product grade A slotted cheese head screws — 4 стр.
DIN 267-4:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts (previous classes) — 8 стр.
DIN 928:1983-08
Отменен
Square weld nuts — 4 стр.
DIN 929:1983-08
Отменен
Hexagon weld nuts — 4 стр.
DIN 1479:1998-02
Отменен
Hexagon turnbuckles — 3 стр.
DIN 13-12:1975-11
Отменен
ISO Metric Screw Threads; Coarse and Fine Threads from 1 to 300 mm Diameter, Selection of Diameters and Pitches — 3 стр.
DIN 267-23:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts with fine thread (ISO classes) — 9 стр.
DIN 949-2:1995-02
Отменен
Studs with metric interference thread MFS - Part 2: Lengths of engagement <ca> 2,5 d (Type B) — 4 стр.
DIN 13-50:1986-11
Отменен
ISO metric screw threads; combination of tolerance classes for the prefered use for formed internal screw threads — 3 стр.
DIN 7984:1985-05
Отменен
Hexagon socket thin head cap screws — 6 стр.
DIN 6912:1985-05
Отменен
Hexagon socket thin head cap screws with pilot recess for wrench key — 7 стр.
DIN 7985:1990-08
Отменен
Cross recessed raised cheese head screws — 5 стр.
DIN 7964:1990-07
Отменен
Reduced shank bolts and screws with coarse thread — 6 стр.
DIN 7991:1986-01
Отменен
Hexagon socket countersunk head cap screws — 6 стр.
DIN 5699:1994-02
Действует
Chain U-links (shackles) for conveyors — 7 стр.
DIN 7991:1985-05
Отменен
Hexagon socket countersunk head screws — 6 стр.
DIN 11015:1995-10
Действует
Agricultural machinery - Flat countersunk square neck bolts with short square — 3 стр.
DIN 83510:1997-08
Отменен
Inland navigation vessels - Tiltable railings - Stanchion — 4 стр.
DIN 83510:1988-08
Отменен
Inland navigation; folding deckrail; stanchion — 4 стр.
DIN 83510:1983-09
Отменен
Inland navigation; folding deckrail; stanchion — 4 стр.
DIN 89283:1994-05
Отменен
Glands for cables; screw bushes — 2 стр.
DIN EN 28736:1992-10
Действует
Unhardened taper pins with internal thread (ISO 8736:1986); german version EN 28736:1992 — 5 стр.
DIN EN 28737:1992-10
Действует
Unhardened taper pins with external thread (ISO 8737:1986); german version EN 28737:1992 — 6 стр.
DIN EN 28733:1992-10
Отменен
Unhardened parallel pins with internal thread (ISO 8733:1986); german version EN 28733:1992 — 6 стр.
DIN EN 28735:1992-10
Отменен
Hardened parallel pins with internal thread (ISO 8735:1987); german version EN 28735:1992 — 7 стр.
DIN EN 89:2001-02
Отменен
Gas-fired storage water heaters for the production of domestic hot water (including Amendment A1:1999 + A2:2000); German version EN 89:1999 + A1:1999 + A2:2000 — 66 стр.
DIN EN 297:1998-07
Отменен
Gas-fired central heating boilers - Type B<(Index)11> and B<(Index)11BS> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; German version EN 297:1994 + A1:1994 + A2:1996 + A3:1996 — 74 стр.
DIN EN 89:2007-06
Отменен
Gas-fired storage water heaters for the production of domestic hot water; German version EN 89:1999 + A1:1999 + A2:2002 + A3:2006 + A4:2006 — 143 стр.
DIN EN 161:1991-09
Отменен
Automatic shut-off valves for gas burners and gas aplliances; german version EN 161:1991 — 20 стр.
DIN EN 88:1991-09
Отменен
Pressure governors for gas appliances for inlet pressures up to 200 mbar; german version EN 88:1991 — 21 стр.
DIN EN 257:1992-03
Отменен
Mechanical thermostats for gas burning appliances; german version EN 257:1992 — 22 стр.
DIN EN 88:1996-08
Отменен
Pressure governors for gas appliances for inlet pressures up to 200 mbar; German version EN 88:1991 + A1:1996 — 22 стр.
DIN EN 125:1991-09
Отменен
Flame supervision devices for gas burning appliances; thermo-electric flame supervision devices; german version EN 125:1991 — 20 стр.
DIN EN 1106:2001-04
Отменен
Manually operated taps for gas burning appliances; German version EN 1106:2001 — 29 стр.
DIN EN 257:1996-08
Отменен
Mechanical thermostats for gas burning appliances; German version EN 257:1992 + A1:1996 — 25 стр.
DIN EN 297:1994-11
Отменен
Gas-fired central heating boilers - Type B<(Index)11> and B<(Index)11BS> boilers fitted with atmospheric burners of nominal heat input not exceeding 70 kW; German version EN 297:1994 — 63 стр.
DIN EN 126:1995-08
Отменен
Multifunctional controls for gas burning appliances; German version EN 126:1995 — 34 стр.
DIN EN 125:1996-08
Отменен
Flame supervision devices for gas burning appliances - Thermo-electric flame supervision devices; German version EN 125:1991 + A1:1996 — 22 стр.
DIN 70618:1990-03
Отменен
Hexagon thin slotted nuts with small widths across flats for use in automotive engineering (not intended for new designs) — 3 стр.
DIN 70615:1990-03
Отменен
Hexagon nuts with small widths across flats for use in automotive engineering (not intended for new designs) — 3 стр.
DIN 70617:1990-03
Отменен
Hexagon slotted nuts with small widths across flats for use in automotive engineering (not intended for new designs) — 3 стр.
DIN 70614:1989-12
Отменен
Automotive engineering; hexagon head screws with small widths across flats (not for new constructions) — 4 стр.
DIN 70616:1990-03
Отменен
Hexagon thin nuts with small widths across flats for use in automotive engineering (not intended or new designs) — 3 стр.
DIN 70613:1989-12
Отменен
Automotive engineering; hexagon head bolts with small widths across flats (not for new constructions) — 4 стр.
DIN 74281-1:2000-09
Действует
Air braking systems - Pressure vessels - Part 1: Measures of welded steel and aluminium single chamber pressure vessels — 5 стр.
DIN EN 13611:2000-12
Отменен
Safety and control devices for gas burners and gas-burning appliances - General requirements; German version EN 13611:2000 — 30 стр.
DIN EN 12078:1998-12
Отменен
Zero governors for gas burners and gas burning appliances; German version EN 12078:1998 — 16 стр.
DIN EN 12067-1:1998-12
Отменен
Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types; German version EN 12067-1:1998 — 20 стр.
DIN EN 31253:1994-11
Отменен
Lasers and laser related equipment - Laser device - Mechanical interfaces (ISO 11253:1993); German version EN 31253:1994 — 4 стр.
DIN ISO 262:1999-11
Действует
ISO general purpose metric screw threads - Selected sizes for screws, bolts and nuts (ISO 262:1998) — 3 стр.
DIN ISO 898-1:1979-04
Отменен
Mechanical Properties of Fasteners; Part 1: Bolts, Screws and Studs — 16 стр.
DIN ISO 6410-2:1993-12
Действует
Technical drawings; screw threads and threaded parts; screw thread inserts; identical with ISO 6410-2:1993 — 6 стр.
DIN ISO 6410-1:1993-12
Действует
Technical drawings; screw threads and threaded parts; general conventions; identical with ISO 6410-1:1993 — 6 стр.
DIN ISO 898-6:1990-03
Отменен
Mechanical properties of fasteners; nuts with specified proof load values; fine pitch thread; identical with ISO 898-6:1988 (status as of 1989) — 9 стр.
DIN 3542:1998-08
Отменен
Connectors and connector protection sockets on barrels - Mating dimensions — 7 стр.
DIN 20594:1991-08
Действует
Suspension claws for mining, for loads up to 30 kN; requirements and testing — 2 стр.
DIN 20636:1990-04
Отменен
Suspended monorails for mining; suspension claws; requirements and testing — 4 стр.
DIN 25203:1992-04
Отменен
Railway vehicles; securing of bolted joints by adhesives — 3 стр.
DIN 25202:1992-04
Отменен
Railway vehicles; securing of bolted joints; initial stressing forces and tightening torques — 11 стр.
DIN 34800:2000-04
Отменен
Bolts and screws with external hexalobular driving feature with small flange — 8 стр.
DIN 316:1998-07
Отменен
Wing screws, rounded wings — 4 стр.
DIN 315:1998-07
Отменен
Wing nuts, rounded wings — 4 стр.
DIN 318:1999-07
Отменен
Wing crews - Edges wings — 4 стр.
DIN ISO 965-2:1999-11
Действует
ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads; medium quality (ISO 965-2:1998) — 7 стр.
DIN 71803:1988-07
Действует
Angle joints with screw studs, with rivet studs — 3 стр.
DIN 34801:1999-12
Действует
Bolts and screws with external hexalobular driving feature with large flange — 8 стр.
DIN ISO 6410-3:1993-12
Отменен
Technical drawings; screw threads and threaded parts; simplified representation; identical with ISO 6410-3:1993 — 4 стр.
DIN 22424:1990-03
Отменен
Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts — 5 стр.
DIN 22425:1990-03
Отменен
Triangular nuts for use with electrical equipment in mining — 4 стр.
DIN EN 1854:1997-11
Отменен
Pressure sensing devices for gas burners and gas burning appliances; German version EN 1854:1997 — 16 стр.