Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 28013:1993-01

Отменен
Ellipsoidal heads — 11 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 2448:1981-02
Отменен
Seamless Steel Pipes and Tubes - Dimensions, Conventional Masses per Unit Length — 3 стр.
DIN 6403:1976-02
Отменен
Measuring Tapes of Steel with Winder Frames or Winder Cases — 3 стр.
DIN 17102:1983-10
Отменен
Weldable normalized fine grain structural steels; technical delivery conditions for plate, strip, wide flats, sections and bars — 15 стр.
DIN 17155:1983-10
Отменен
Creep resistant steel plate and strip; technical delivery conditions — 16 стр.
DIN 17440:1985-07
Отменен
Stainless steels; technical delivery conditions for plate and sheet, hot rolled strip, wire rod, drawn wire, steel bars, forgings and semi-finished products — 26 стр.
DIN 28011:1993-01
Отменен
Torispherical heads — 11 стр.
DIN EN 10025:1991-01
Отменен
Hot-rolled unalloyed structural steel products; technical delivery conditions; german version EN 10025:1990 — 27 стр.
DIN 28013:2012-06
Действует
Ellipsoidal heads — 19 стр.
DIN 28013:1987-05
Отменен
Ellipsoidal dished ends — 11 стр.

На этот документ ссылаются

DIN 8975-6:1980-08
Отменен
Refrigeration Plants; Safety Principles for Construction, Equipment, Installation and Operation; Refrigerant; Pipelines — 14 стр.
DIN EN 14879-6:2010-04
Действует
Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers; German version EN 14879-6:2009 — 60 стр.
DIN 4681-1:1983-06
Отменен
Steel fixed size pressure vessels for LPG, for underground installation; dimensions, equipment — 6 стр.
DIN 4680:1978-11
Отменен
Stationary pressure vessels of steel, for propen, buten and their mixtures for arranging above ground; dimensions, equipment — 6 стр.
DIN 28011:1987-05
Отменен
Torospherical dished ends — 11 стр.
DIN 28136-1:1993-02
Отменен
Agitator vessels; principal dimensions — 5 стр.
DIN 28081-1:2003-08
Отменен
Tubular supports for vessels - Dimensions — 4 стр.
DIN 28136-3:1999-11
Отменен
Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels — 23 стр.
DIN 28005-2:1993-12
Отменен
General tolerances for glass lined vessels — 6 стр.
DIN 28020:1998-04
Отменен
Horizontal pressure vessels 0,63 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions — 25 стр.
DIN 28022:1998-04
Отменен
Vertical pressure vessels - Vessels for plants 0,063 m<(hoch)3> to 25 m<(hoch)3> - Dimensions — 28 стр.
DIN 28021:1992-08
Отменен
Horizontal pressure vessels of 6,3 m<(hoch)3> up to 100 m<(hoch)3> capacity for storage purposes — 21 стр.
DIN 28021:1998-04
Отменен
Vertical pressure vessels - Vessels for storage, 6,3 m<(hoch)3> up to 100 m<(hoch)3> - Dimensions — 24 стр.
DIN 28013:1987-05
Отменен
Ellipsoidal dished ends — 11 стр.
DIN 28136-4:1987-05
Отменен
Mixing vessels; wall thicknesses for unalloyed and stainless steel mixing vessels — 6 стр.
DIN 28020:1992-09
Отменен
Horizontal pressure vessels of 0,63 m<(hoch)3> up to 25 m<(hoch)3> capacity — 22 стр.
DIN 28022:1992-08
Отменен
Vertical pressure vessels of 0,063 m<(hoch)3> to 25 m<(hoch)3> capacity for use in chemical process engineering — 27 стр.
DIN 28007-2:1994-01
Отменен
General tolerances for columns; glass lined columns — 6 стр.
DIN 28136-4:1993-09
Отменен
Agitated vessels of carbon and stainless steel; wall thickness — 7 стр.
DIN 28136-1:1988-05
Отменен
Mixing vessels; principal dimensions — 5 стр.
DIN 28022:1991-01
Отменен
Vertical pressure vessels of 0,063 m<(hoch)3> to 25 m<(hoch)3> capacity for use in chemical process engineering — 27 стр.
DIN 28136-3:1989-10
Отменен
Glass-lined steel mixing vessels; arrangement and size of cover nozzles and manholes — 15 стр.
DIN 28060 Beiblatt 1:1979-09
Отменен
Brick-lined vessels and apparatus for process units; test methods for tolerances — 5 стр.
DIN 28020:2007-07
Действует
Horizontal pressure vessels 0,63 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions — 12 стр.
DIN 28022:2006-05
Действует
Vertical pressure vessels - Vesels for process plants 0,063 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions — 16 стр.
DIN 28060:1986-11
Отменен
Brick-lined vessels and apparatus; design and construction — 3 стр.
DIN 28008:1978-05
Отменен
General tolerances for construction of tubular heat exchangers — 14 стр.
DIN 28136-3:1984-04
Отменен
Agited vessels; position and sizes of cover nozzles for vessels of glass lined steel — 8 стр.
DIN 28007-1:1975-12
Отменен
Tolerances for construction of columns; columns for common use — 2 стр.
DIN 28006-2:1983-10
Отменен
General tolerances for the fabrication of agitator vessels; glass lined agitator vessels — 7 стр.
DIN 28005-1:1975-12
Отменен
Tolerances for construction of vessels; vessels for common use — 4 стр.
DIN 28006-1:1978-12
Отменен
Tolerances for construction of agitator vessels; agitator vessels for common use — 5 стр.
DIN 28130:2007-07
Действует
Chemical equipment - Survey on components of agitator vessels with agitation unit — 31 стр.
DIN 28130-2:1986-06
Отменен
Agitator vessels with agitation unit; glass lined steel vessels; terms, component combinations, summary — 14 стр.
DIN 28006-1:1986-07
Отменен
General tolerances for agitator vessels; agitator vessels for general use — 6 стр.
DIN 28020:1980-03
Отменен
Lying pressure vessels, 0,63 up to 25 m<(hoch)3> — 17 стр.
DIN 28012:1970-10
Отменен
Torispherical heads with long straight flange — 3 стр.
DIN 28136-4:1979-09
Отменен
Agitated vessels of carbon and stainless steel; nominal diameter 1000 and upwards, wall thickness — 6 стр.
DIN 28060 Beiblatt 1:1986-12
Отменен
Brick-lined vessels and apparatus; examples for test methods for tolerances — 4 стр.
DIN 28013:2012-06
Действует
Ellipsoidal heads — 19 стр.
DIN 28007-1:1986-07
Отменен
General tolerances for columns; columns for general use — 5 стр.
DIN 28136-2:2005-12
Действует
Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels — 15 стр.
DIN 28136-14:1999-11
Действует
Agitator vessels - Part 14: Position and sizes of cover nozzles for glass lined steel agitator vessels, position H for vessels form BE with d<(Index)1> = 2400 mm to 3600 mm and position K for vessels form CE with d<(Index)1> = 2400 mm to 3600 mm; inactive for new design — 5 стр.
DIN 28005-1:2011-08
Действует
Tolerances for vessels - Part 1: Vessels of metallic materials — 10 стр.
DIN 28130-1:1986-06
Отменен
Agitator vessels with agitation unit; non-alloy and stainless steel vessels; terms, component combinations, summary — 14 стр.
DIN 28136-1:2005-12
Действует
Agitator vessels - Part 1: Principal dimensions — 10 стр.
DIN 28136-3:1982-05
Отменен
Agitated vessels; position and sizes of cover nozzles for vessels of glass lined steel — 8 стр.
DIN 28021:1985-05
Отменен
Vertical pressure vessels; vessels for storage, 6,3 up to 100 m<(hoch)3> — 21 стр.
DIN 28136-1:1981-06
Отменен
Agitated vessels; main dimensions — 5 стр.
DIN 28011:1970-10
Отменен
Torispherical heads with short straight flange — 6 стр.
DIN 28014:1970-10
Отменен
Elliptical heads with long straight flange — 3 стр.
DIN 28011:1993-01
Отменен
Torispherical heads — 11 стр.
DIN 28060:1979-09
Отменен
Brick-lined vessels and apparatus for process units; design and construction — 3 стр.
DIN 28007-1:2009-10
Действует
Tolerances for columns - Part 1: Columns of metallic materials — 8 стр.
DIN 28082-1:1994-07
Отменен
Skirts for apparatus; part 1: with simple bottom ring; dimensions — 4 стр.
DIN 28006-1:2009-10
Отменен
Tolerances for agitator vessels - Part 1: Agitator vessels of metallic materials — 10 стр.
DIN 28006-2:2001-04
Отменен
General tolerances for agitator vessels - Part 2: Glass lined agitator vessels — 7 стр.
DIN 28007-2:2001-04
Отменен
General tolerances for columns - Part 2: Glass lined columns — 7 стр.
DIN 28005-2:2001-04
Отменен
General tolerances for vessels - Part 2: Glass lined vessels — 9 стр.
DIN 28136-3:2005-12
Отменен
Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels — 20 стр.