Electrical engineering; basic environmental testing procedures; tests; test N: change of temperature; identical with IEC 60068-2-14, edition 1984 (status as of 1986)
Air Quality - Certification of automated dust arrestment plant monitors for use on stationary sources - Performance criteria and test procedures; German version EN 15859:2010— 41 стр.
Generic specification; connector sets for optical fibres and cables; part 1: requirements, test methods and qualification approval procedures; German version EN 186000-1:1993— 122 стр.
Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors (IEC 60384-23:2015); German version EN 60384-23:2015— 32 стр.
Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz (IEC 60603-7-4:2005); German version EN 60603-7-4:2005— 95 стр.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature (IEC 61300-2-22:2007); German version EN 61300-2-22:2007— 10 стр.
Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristics impedance 50 ohms (type BNC) (IEC 61169-8:2007); German version EN 61169-8:2007— 38 стр.
Environmental testing - Part 2: Tests; guidance on change of temperature tests (IEC 60068-2-33:1971 + A1:1978); German version EN 6068-2-33:1999— 7 стр.
Connectors for electronic equipment - Product requirements - Part 3-116: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 13 related to IEC 61076-3-106 - Locking lever (IEC 61076-3-116:2008); German version EN 61076-3-116:2008— 23 стр.
Radio-frequency connectors - Part 1: Generic specification; general requirements and measuring methods (IEC 61169-1:1992); German version EN 61169-1:1994— 45 стр.
Electroacoustics - Hearing aids - Part 7: Measurement of performance characteristics of hearing aids for production, supply and delivery quality assurance purposes (IEC 60118-7:2005); German version EN 60118-7:2005— 24 стр.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests; change of temperature (IEC 61300-2-22:1995); German version EN 61300-2-22:1997— 4 стр.
Directly heated negative temperature coefficient thermistors - Part 1: Generic specification (IEC 60539-1:2002); German version EN 60539-1:2002— 48 стр.
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 1: Measuring equipment with analogue and digital output (IEC 61987-1:2006); German version EN 61987-1:2007— 52 стр.
Transformers and inductors for use in electronic and telecommunication equipment - Part 7: Sectional specification for high frequency inductors and intermediate frequency transformers on the basis of the capability approval procedure (IEC 61248-7:1996); German version EN 61248-7:1997— 19 стр.
Connectors for electronic equipment - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface (IEC 61076-3-106:2006); German version EN 61076-3-106:2006— 52 стр.
Piezoelectric filters of assessed quality - Part 1: Generic specification (IEC 60368-1:2000 + A1:2004); German version EN 60368-1:2000 + A1:2004— 38 стр.
Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values (IEC 60689:2008); German version EN 60689:2009— 20 стр.
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 5-2: General test methods for materials and assemblies - Soldering flux for printed board assemblies (IEC 61189-5-2:2015); German version EN 61189-5-2:2015— 44 стр.
Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems (IEC 60873:1986, modified); German version EN 60873:1993— 22 стр.
Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions (IEC 61298-2:1995); German version EN 61298-2:1995— 16 стр.
Transformers and inductors for use in electronic and telecommunication equipment - Part 5: Sectional specification for pulse transformers on the basis of the capability approval procedure (IEC 61248-5:1996); German version EN 61248-5:1997— 13 стр.
Fibre optic inerconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2004); German version EN 61300-2-47:2004— 9 стр.
Thermistors - Directly heated positive step-function temperature coefficient - Part 1: Generic specification (IEC 60738-1:1998); German version EN 60738-1:1999— 33 стр.
Directly heated negative temperature coefficient thermistors - Part 2: Sectional specification - Surface mount negative temperature coefficient thermistors (IEC 60539-2:2003); German version EN 60539-2:2004— 24 стр.
Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions (IEC 60118-8:2005); German version EN 60118-8:2005— 34 стр.
Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (O,374 in) with different versions of screw coupling - Characteristic impedance 50 <Ohm> (Types SC-A and SC-B) (IEC 60169-21:1985 + A1:1996); German version EN 60169-21:1997— 19 стр.
Semiconductor devices - Mechanical and climatic test methods - Part 25: Temperature cycling (IEC 60749-25:2003); German version EN 60749-25:2003— 15 стр.
Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations (IEC 61298-1:1995); German version EN 61298-1:1995— 13 стр.
Connectors for electronic equipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coupling (IEC 61076-3-117:2009); German version EN 61076-3-117:2009— 21 стр.
Semiconductor devices - Mechanical and climatic test methods - Part 11: Rapid change of temperature; Two-fluid-bath method (IEC 60749-11:2002); German version EN 60749-11:2002— 10 стр.
Surface mounting technology - Part 1: Standard method for the specification of surface mounting components (SMDs) (IEC 61760-1:2006); German version EN 61760-1:2006— 31 стр.
Transformers and inductors for use in electronic and telecommunication equipment - Part 2: Sectional specification for signal transformers on the basis of the capability approval procedure (IEC 61248-2:1996); German version EN 61248-2:1997— 13 стр.
Industrial-process control systems; instruments with analogue inputs and two- or multi-state outputs; part 1: methods of evaluating the performance (IEC 61003-1-1991); German version EN 61003-1:1993— 18 стр.
Methods of measurement on receiving antennas for satellite broadcast transmission in the 11/12 GHz band - Part 2: Mechanical and environmental tests on individual and collective receiving antennas (IEC 61114-2:1996); German version EN 61114-2:1996— 20 стр.
Environmental testing - Part 2: Tests; tests Z/BFc: Combined dry heat/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-51:1983); German version EN 60068-2-51:1999— 11 стр.
Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification (IEC 60738-1:2006); German version EN 60738-1:2006— 58 стр.
Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1:1999, modified + A1:2001); German version EN 60115-1:2001 + A1:2001— 91 стр.
Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 600 MHz (category 7, shielded) (IEC 60603-7-7:2002); German version EN 60603-7-7:2002— 84 стр.
Environmental testing - Part 3-4: Supporting documentation and guidance; Damp heat tests (IEC 60068-3-4:2001); German version EN 60068-3-4:2002— 17 стр.
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2006); German version EN 61300-2-47:2007— 11 стр.
Connectors for electronic equipment - Product requirements - Part 3-114: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for frequencies up to 600 MHz for industrial environments incorporating the IEC 60603-7 series interface - Variant 11 related to IEC 61076-3-106 - Bayonet coupling type (IEC 61076-3-114:2009); German version EN 61076-3-114:2009— 26 стр.
Fibre optic interconnecting devices and passive components performance standard - Part 111-9: Sealed closures for category S - Subterranean (IEC 61753-111-9:2009); German version EN 61753-111-9:2010— 28 стр.
Semiconductor devices - Mechanical and climatic test methods (IEC 60749:1996 + A1:2000 + A2:2001); German version EN 60749:1999 + A1:2000 + A2:2001— 74 стр.
Environmental testing- Part 2: Tests; tests Z/AFc: Combined cold/vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens (IEC 60068-2-50:1983); German version EN 60068-2-50:1999— 10 стр.
Waveguide type dielectric resonators - Part 2: Guidelines for oscillator and filter applications (IEC 61338-2:2004); German version EN 61338-2:2004— 32 стр.
Fixed resistors for use in electronic equipment - Part 1: Generic specification (IEC 60115-1:1999, modified + A1:2001); German version EN 60115-1:2001 + A1:2001 + A11:2007— 93 стр.
Surface mounting technology - Part 3: Standard method for the specification of components for Through Hole Reflow (THR) soldering (IEC 61760-3:2010); German version EN 61760-3:2010— 26 стр.
Transformers and inductors for use in electronic and telecommunication equipment - Part 3: Sectional specification for power transformers on the basis of the capability approval procedure (IEC 61248-3:1996); German version EN 61248-3:1997— 13 стр.
Quartz crystal controlled oscillators of assessed quality - Part 1: Generic specification (IEC 60679-1:1997 + A1:2002); German version EN 60679-1:1998 + A1:2002— 80 стр.
Thermistors - Directly heated positive temperature coefficient - Part 1: Generic specification (IEC 60738-1:2006 + A1:2009); German version EN 60738-1:2006 + A1:2009— 58 стр.
Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification (IEC 61248-1:1996); German version EN 61248-1:1997— 26 стр.
Environmental testing - Part 4: Information for specification writers - Test summaries (IEC 60068-4:1987 + A1:1992 + A2:1994); German version EN 60068-4:1996— 85 стр.
Liquid crystal display devices - Part 10-1: Environmental, endurance and mechanical test methods - Mechanical (IEC 61747-10-1:2013); German version EN 61747-10-1:2013— 14 стр.
Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods (IEC 61747-5:1998); German version EN 61747-5:1998— 22 стр.
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007); German version EN 62137-1-1:2007— 18 стр.
Fibre optic active components and devices - Performance standards - Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004— 15 стр.
High frequency inductive components - Part 1: Fixed surface mount inductors for use in electronic and telecommunication equipment (IEC 62674-1:2012); German version EN 62674-1:2012— 35 стр.
Semiconductor devices - Micro-electromechanical devices - Part 4: Generic specification for MEMS (IEC 62047-4:2008); German version EN 62047-4:2010— 22 стр.
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-2: Shear strength test (IEC 62137-1-2:2007); German version EN 62137-1-2:2007— 19 стр.
Electronics assembly technology - Part 4: Endurance test methods for solder joint of area array type package surface mount devices (IEC 62137-4:2014); German version EN 62137-4:2014 + AC:2015— 44 стр.
Electronics assembly technology - Part 3: Selection guidance of environmental and endurance test methods for solder joints (IEC 62137-3:2011); German version EN 62137-3:2012— 47 стр.
Fibre optic active components and devices - Reliability standards - Part 3: Laser modules used for telecommunication (IEC 62572-3:2011); German version EN 62572-3:2012— 21 стр.
Blank detail specification; electromechanical all-or-nothing heavy load relays of assessed quality (hermetically sealed, 5 A to 25 A); german version EN 116303:1993— 28 стр.
Generic specifications: solid state all-or-nothing relays of assessed quality; generic data and methods of test; german version EN 117000:1991— 61 стр.
Generic specification: Directly heated positive temperature coefficient thermistors typically made from modified ferro-electric materials; German version EN 144000:1993— 68 стр.
Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007); German version EN ISO 81060-1:2012— 50 стр.
Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts (includes corrigendum AC:1999); German version EN 81-2:1998 + AC:1999— 91 стр.
Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors; German version EN 1760-1:1997+A1:2009— 55 стр.
