Testing of mineral oils; precision of test methods, general introduction, definitions and their application to mineral oil standards which contain requirements— 8 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004); German version EN ISO 1183-1:2004— 14 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004— 14 стр.
Testing of rubber and elastomers - Quantitative determination of polymers - Determination of the content of siloxane in hot vulcanised elastomers of silicone— 4 стр.
Standard reference rubber; hydrogenated acrylo-nitrile butadiene rubber (HNBR), vulcanized with peroxide, for characterizing service fluids with respect to their action on HNBR— 3 стр.
Standard reference elastomers; Acrylonitrile-butadiene rubber (NBR) with low acrylonitrile content for characterizing test liquids and greases based on mineral oil— 3 стр.
Standard reference elastomers; Acrylonitrile-butadiene rubber (NBR), cross-linked by peroxide, for characterizing liquids with regard to their effect on NBR— 4 стр.
Standard reference elastomers; acrylonitrile-butadiene rubber (NBR), low sulphur cured, for characterizing service fluids with respect to their action on NBR— 8 стр.
Standard reference elastomers; Acrylonitrile-butadiene rubbers (NBR) with low sulfur content for characterizing liquids with regard to their effect on NBR— 8 стр.
Packaging - Special requirements for the delivery, purchase and use of one-piece and two-piece 28 mm screw caps made from polyethylene (PE) or polypropylene (PP) and 28 mm rolled-on closures made from aluminium (Al)— 29 стр.
Standard reference elastomers; ethylene propylene diene rubber (EPDM), peroxide cured, for characterizing service fluids with respect to their action on EPDM— 3 стр.
Standard reference elastomers; acrylonitrile-butadiene rubber (NBR), peroxide-cured, for characterizing service fluids with respect to their action on NBR— 4 стр.
Road vehicles - Determination of resistance to forced entry of security glass constructions used in vehicle glazing - Test of glazing systems (ISO 23013:2016)— 29 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation and specification (ISO 12086-1:1995); German version EN ISO 12086-1:1999— 22 стр.
Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); German version EN ISO 12215-1:2000— 8 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006); German version EN ISO 12086-2:2006— 56 стр.
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:1997); German version EN ISO 13000-2:1997— 10 стр.
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998); German version EN ISO 11542-2:1998— 13 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995); German version EN ISO 12086-2:1999— 36 стр.
Plastics - Polyketone(PK)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000); German version EN ISO 15526-2:2004— 14 стр.
Plastics - Poly(phenylene ether)(PPE)moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15103-2:2000); German version EN ISO 15103-2:2004— 14 стр.
Small sewage treatment plants - Plants without aeration (septic tanks) - Part 101: Principles for factory production control and third party control— 6 стр.
Small sewage treatment plants - Plants without aeration (septic tanks) - Part 101: Principles for factory production control and third party control— 6 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998); German version EN ISO 10350-1:2000— 17 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001); German version EN ISO 10350-2:2001— 16 стр.
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:2003); German version EN ISO 10366-2:2003— 16 стр.
Plastics - Polybutene (PB) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:1993); German version EN ISO 8986-1:1999— 7 стр.
Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994); German version EN ISO 10366-2:1999— 11 стр.
Plastics - Polybutene (PB) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:1995); German version EN ISO 8986-2:1995— 7 стр.
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system; German version EN 1329-1:1999— 26 стр.
Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 4: Requirements for special fittings, adapters and compatible accessories; German version EN 295-4:1995— 14 стр.
Preinsulated bonded pipe systems for underground hot water networks - Pipe assembly of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 253:1994— 20 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998— 26 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:2003); German version EN ISO 2897-2:2003— 14 стр.
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994); German version EN ISO 2580-2:1999— 10 стр.
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999— 12 стр.
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003); German version EN ISO 2580-2:2003— 16 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999— 9 стр.
Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995); German version EN ISO 4894-2:1999— 10 стр.
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2898-2:1997); German version EN ISO 2898-2:1999— 8 стр.
