Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 19599:1986-04

Отменен
Drains and manhole tops in buildings; classification, design and construction, testing, marking — 13 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN EN 12409:2009-01
Отменен
Plastics and rubber machines - Thermoforming machines - Safety requirements; German version EN 12409:2008 — 49 стр.
DIN VDE 0100 Beiblatt 2:1990-03
Отменен
Erection of power installations, with nominal voltages up to 1000 V; list of relevant standards
DIN 1045-2:2008-08
Действует
Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, properties, production and conformity - Application rules for DIN EN 206-1 — 62 стр.
DIN 1229:1996-06
Отменен
Masses per unit area for gully tops and manhole tops for vehicular and pedestrian areas — 3 стр.
DIN 16916-2:1987-09
Отменен
Plastics; phenolic resins; testing — 19 стр.
DIN 1693-1:1973-10
Отменен
Cast Iron with Nodular Graphite; Unalloyed and Low Alloy Grades — 5 стр.
DIN 1693-2:1977-10
Отменен
Cast Iron with Nodular Graphite; Unalloyed and Low Alloy Grades; Properties in Cast-on Test Piece — 4 стр.
DIN 16946-2:1989-03
Действует
Cured casting resins; types — 8 стр.
DIN 16948-2:1975-02
Отменен
Glass fibre reinforced reaktion moulding materials in the moulded state; properties of special moulding materials — 3 стр.
DIN 17100:1980-01
Отменен
Steels for General Structural Purposes; Quality Standard — 19 стр.
DIN 1725-2:1986-02
Отменен
Aluminium alloys, casting alloys; sand casting, gravity die casting, pressure die casting, investment casting — 14 стр.
DIN 1745-1:1983-02
Отменен
Wrought aluminium and aluminium alloy plate, sheet and strip greater than 0,35 mm in thickness; Properties — 6 стр.
DIN 18195-5:2000-08
Отменен
Water-proofing of buildings - Part 5: Water-proofing against non-pressing water on floors and in wet areas; design and execution — 8 стр.
DIN 18195-9:2004-03
Отменен
Water-proofing of buildings - Part 9: Penetrations, transitions, connections and endings — 18 стр.
DIN 19530-2:1983-02
Отменен
Steel socket pipes and fittings for sewers; Technical delivery conditions — 7 стр.
DIN 19541:2004-12
Действует
Trap seals for special uses - Requirements and test methods — 13 стр.
DIN 19543:1982-08
Отменен
General requirements for pipe joints in sewers and drainpipes — 4 стр.
DIN 19560-10:1999-03
Отменен
Pipes and fittings made of polypropylene (PP) for hot water resistant waste and soil discharge systems inside buildings - Part-10: Fire behaviour, quality control and installation recommendations — 8 стр.
DIN 19561-10:1999-12
Отменен
Pipes and fittings made of styrene-copolymerisats for hot water resistant waste and soil discharge systems inside buildings - Part 10: Fire behaviour, quality control and installation recommendations — 8 стр.
DIN 19585:1976-11
Отменен
Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron — 3 стр.
DIN 1986-100:2008-05
Отменен
Drainage systems on private ground - Part 100: Specifications in relation to DIN EN 752 and DIN EN 12056 — 93 стр.
DIN 1986-2 Beiblatt 1:1995-03
Отменен
Drainage systems on private ground - Part 2: Design of sizes of drain, waste and ventilation pipelines; examples of calculation
DIN 1986-3:2004-11
Действует
Drainage systems on private ground - Part 3: Specifications for service and maintenance — 30 стр.
DIN 1986-4:2003-02
Отменен
Drainage systems on private ground - Part 4: Fields of application of sewage pipes and fittings of different materials — 10 стр.
DIN 1997-1:1984-05
Отменен
Shut-off valves for site drainage systems; backflow gates for non-faecal sewage; requirements, design principles and materials — 3 стр.
DIN 1997-2:1984-05
Отменен
Shut-off valves for site drainage systems; backflow gates for non-faecal sewage; testing — 4 стр.
DIN 40433:2008-11
Действует
Machine taps for steel conduit thread Pg 7 to Pg 48 — 4 стр.
DIN 4102-12:1998-11
Действует
Fire behaviour of building materials and building components - Part 12: Circuit integrity maintenance of electric cable systems; requirements and testing — 10 стр.
DIN 4281:1998-08
Действует
Concrete for prefabricated sewage units - Manufacture, requirements, testing and quality control — 8 стр.
DIN 476-2:2008-02
Действует
Trimmed sizes of paper - C series — 4 стр.
DIN 50011-13:1991-09
Отменен
Technical climatology; climate-test-devices; climatic parameter: air-humidity and air-temperature — 6 стр.
DIN 51220:2003-08
Заменен
Materials testing machines - Generals for requirements and for verification and calibration of materials testing machines — 9 стр.
DIN 51300:1993-12
Отменен
Materials testing machines; verification of materials testing machines; generals — 2 стр.
DIN 53122-1:2001-08
Действует
Testing of plastics and elastomer films, paper, board and other sheet materials - Determination of water vapour transmission - Part 1: Gravimetric method — 9 стр.
DIN 53420:1978-12
Отменен
Testing of Cellular Materials; Determination of Apparent Density — 2 стр.
DIN 53428:1986-08
Отменен
Determination of the behaviour of cellular plastics when exposed to fluids, vapours and solids — 6 стр.
DIN 53456:1973-01
Отменен
Testing of Plastics; Indentation Hardness Test — 3 стр.
DIN 53458:1968-07
Отменен
Testing of Plastics; Determination of Dimensional Stability under Heat by Martens Method — 2 стр.
DIN 53479:1976-07
Отменен
Testing of Plastics and Elastomers; Determination of Density — 4 стр.
DIN 53495:1984-04
Отменен
Testing of plastics; determination of water absorption — 7 стр.
DIN 53505:2000-08
Отменен
Testing of rubber - Shore A and Shore D hardness test — 5 стр.
DIN 539-1:1998-04
Отменен
Screwed scaling plugs for syphons of drain fittings - Part 1: Plugs of copper-zinc alloy — 3 стр.
DIN 539-2:1998-04
Отменен
Screwed scaling plugs for syphons of drain fittings - Part 2: Plugs of Polypropylen (PP) — 3 стр.
DIN 7748-1:1985-09
Отменен
Plastic moulding materials; unplasticized polyvinyl chloride (PVC-U) moulding materials; classification and designation — 6 стр.
DIN 8075-1:1976-08
Отменен
Pipes of High-density PE (High-density Polyethylene); Type 1; General Quality Requirements, Testing — 3 стр.
DIN 19599:1989-01
Отменен
Gullies, access covers and frames for buildings; classification, principles of construction and testing, marking — 14 стр.
DIN 19599:1982-08
Отменен
Gullies and covers in buildings; Classification, principles of design and testing, marking — 13 стр.

На этот документ ссылаются

DIN 19599:1982-08
Отменен
Gullies and covers in buildings; Classification, principles of design and testing, marking — 13 стр.
DIN 18195-9:1986-12
Отменен
Waterproofing of buildings and stuctures; penetrations, transitions, closures — 7 стр.
DIN 18225 Beiblatt 1:1988-06
Действует
Industrial construction; traffic ways in industrial buildings; regulations — 8 стр.
DIN 19599:1989-01
Отменен
Gullies, access covers and frames for buildings; classification, principles of construction and testing, marking — 14 стр.