Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 7708-2:1975-10

Отменен
Types of Plastic Moulding Materials; Phenolic Moulding Materials — 9 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 12348:1972-06
Отменен
Round bottom flasks and flat bottom flasks with conical socket 1 : 10 — 2 стр.
DIN 16700:1967-09
Отменен
Plastics; Moulding Techniques for Moulding Materials; Production Processes and Production Equipment, Definitions
DIN 16919:1972-05
Отменен
Types of Plastic Moulding Materials; Preferred Colours for Mouldings Made from Thermosetting Moulding Materials — 2 стр.
DIN 50014:1985-07
Отменен
Climates and their technical application; standard atmospheres — 2 стр.
DIN 50015:1975-08
Отменен
Atmospheres and their Technical Application; Constant Test Atmospheres — 2 стр.
DIN 51222:1995-06
Отменен
Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <kleiner => 50 J and verification — 3 стр.
DIN 53451:1972-07
Отменен
Plastics; Directions for Preparing Test Specimens of Thermosetting Moulding Materials — 4 стр.
DIN 53452:1977-04
Отменен
Testing of Plastics; Flexural Test — 5 стр.
DIN 53453:1975-05
Отменен
Testing of Plastics; Impact Flexural Test — 5 стр.
DIN 53458:1968-07
Отменен
Testing of Plastics; Determination of Dimensional Stability under Heat by Martens Method — 2 стр.
DIN 53459:1981-09
Отменен
Testing of plastics; Assessment of behaviour during and after contact with an incandescent rod — 4 стр.
DIN 53462:1987-01
Отменен
Testing of plastics; martens method of determining the temperature of deflection under abending stress — 5 стр.
DIN 53464:1962-11
Отменен
Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials — 2 стр.
DIN 53465:1963-04
Отменен
Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials — 2 стр.
DIN 53468:1974-12
Отменен
Testing of Plastics; Determination of Apparent Density of Moulding Material that Can Be Poured from a Specified Funnel — 2 стр.
DIN 53470:1951-06
Отменен
Testing of Compression Moulding Materials; Compression Mould for the Production of Standard Specimens of Thermosetting Compression Moulding Materials — 2 стр.
DIN 53477:1992-11
Отменен
Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis — 3 стр.
DIN 53482:1967-01
Отменен
Testing of Insulating Materials; Determination of Electrical Resistances Values — 9 стр.
DIN 53483-2:1970-03
Действует
Testing of Insulating Materials; Determination of Dielectric Properties; Testing at Standard Frequencies of 50 Hz, 1 kHz, 1 MHz — 8 стр.
DIN 53487:1975-10
Отменен
Testing of plastics; determination of deflection as a function of temperature — 4 стр.
DIN 53710:1970-01
Отменен
Testing of Plastics; Determination of the Percentage of Acetone Soluble Matter in Phenolic Moulding Materials — 2 стр.
DIN 55947:1973-08
Отменен
Paints and Plastics; Common Definitions — 2 стр.
DIN 7702:1979-10
Отменен
Control symbol for typified moulding materials and mouldings made therefrom — 2 стр.
DIN 7708-1:1980-12
Отменен
Plastic Moulding Materials; Plastic Products; Concepts — 1 стр.
DIN 83319:1999-06
Действует
Fibre ropes - Splices - Definitions, safety requirements, test method — 6 стр.
DIN EN ISO 14526-1:2000-08
Действует
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999 — 7 стр.
DIN EN ISO 14526-2:2000-08
Действует
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999 — 12 стр.
DIN EN ISO 14526-3:2000-08
Действует
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999 — 8 стр.

На этот документ ссылаются

DIN 1850-5:1998-07
Действует
Plain bearings - Part 5: Thermoset plastic bushes — 4 стр.
DIN 388-1:1996-01
Действует
Hand-wheels of plastic with ripple ring — 2 стр.
DIN 7708 Beiblatt:1968-10
Отменен
Types of Plastic Moulding Materials; Properties of Test Specimens from Phenolic, Aminoplastic and Aminoplast/Phenolic Compression Moulding Materials — 2 стр.
DIN 6335:1996-01
Отменен
Palm grips — 4 стр.
DIN 6336:1996-01
Отменен
Star grips — 4 стр.
DIN 15931-2:1976-05
Отменен
Motion-picture cameras for film 16 mm and film 35 mm; 5pin connectors, power supply — 2 стр.
DIN 16770-3:1986-05
Отменен
Testing of plastics; test specimens of thermoplastic materials; determination of maximum reversion — 3 стр.
DIN EN ISO 295:1998-10
Отменен
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:1991); German version EN ISO 295:1998 — 8 стр.
DIN EN ISO 308:1998-03
Действует
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997 — 4 стр.
DIN 89322:1996-09
Отменен
Switches without cases - AC/DC 10 A, AC/DC 250 V, degree of protection IP 00 — 3 стр.
DIN 89322:1979-03
Отменен
Switch interiors, 10 A, 250 V — 3 стр.
DIN 53451:1972-07
Отменен
Plastics; Directions for Preparing Test Specimens of Thermosetting Moulding Materials — 4 стр.
DIN 53464:1962-11
Отменен
Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials — 2 стр.
DIN 53704:1960-07
Отменен
Testing of Plastics; Determination of Free Phenols in Phenolic Mouldings (Semi-quantitative Method) — 1 стр.
DIN 53700:1970-01
Отменен
Testing of Plastics; Determination of Percentage of Acetone Soluble Matter in Phenolic Mouldings — 2 стр.
DIN 53710:1970-01
Отменен
Testing of Plastics; Determination of the Percentage of Acetone Soluble Matter in Phenolic Moulding Materials — 2 стр.
DIN 53499:1974-05
Отменен
Testing of plastics; boiling test of moulded articles made of thermosetting moulding materials — 2 стр.
DIN 43628:1998-10
Действует
Fuseboxes for cable protection fuses — 6 стр.
DIN 41677:1987-06
Отменен
Miniature fuses; screw-in type 6,3 A/250 V fuse bases not affording protection against contact with live parts for non interchangeable fuse-links — 3 стр.
DIN 41225:1972-06
Отменен
Soldering-tag terminal strip — 3 стр.
DIN 43637-4:1977-05
Отменен
Overhead line private connection boxes for HRC-fuses, size 00 up to 100 A, 500 V and size 1 up to 250 A, 500 V, degree of protection system IP 54 — 2 стр.
DIN 43637-4:1985-05
Отменен
Overhead-line house connection boxes for HRC-fuses size 00 up to 100 A 500 V and size 1 up to 250 A 500 V; degree of protection IP 54 — 4 стр.
DIN 43628:1992-07
Отменен
Fuseboxes for cable protection fuses — 5 стр.
DIN 43627-2:1985-05
Отменен
House connection boxes for underground service for HRC-fuses size 00 up to 100 A 500 V and size 1 up to 250 A 500 V — 4 стр.
DIN 41709-1:1988-01
Отменен
Electrical communication engineering; connectors for measuring and switching applications; main dimensions — 4 стр.
DIN 41669:1981-10
Отменен
Miniature fuses; fuse holders 6,3 A, 250 V affording protection against contact with live parts; main outlines — 4 стр.
DIN 41671:1987-06
Отменен
Miniature fuses; fuse base 6,3 A/250 V, not affording protection against contact with live parts; screw-in type, fastening thread M 14 × 1 for interchangeable fuse-links — 3 стр.
DIN 43628:1986-04
Отменен
Fuseboxes for cable protection fuses — 6 стр.
DIN 43627-2:1977-05
Отменен
House service boxes for underground service conductors for HRC-fuses — 2 стр.
DIN 43627-1:1970-05
Отменен
House service boxes for underground service conductors for screws-typ fuses, 63 A, 500 V — 2 стр.
DIN 41676:1987-06
Отменен
Miniature fuses; fuse carrier for 6,3 A/250 V screw-in type; fuse bases complying with DIN 41672 and DIN 41677 — 2 стр.
DIN 43636-2:1985-05
Отменен
Overhead-line house connection boxes for HRC-fuses size 00 up to 100 A 500 V; degree of protection IP 40 — 4 стр.
DIN 41674:1987-06
Отменен
Miniature fuses; fuse carrier for 6,3 A/250 V screw-in type; fuse bases complying with DIN 41671 and DIN 41673 — 2 стр.
DIN 41671:1972-04
Отменен
Miniature fuses; fuse base, 6,3 A, 250 V, with screw-thread for interchangeable cartridge fuse links, fastening-thread M 14 Ч 1 — 2 стр.
DIN 43637-3:1977-05
Отменен
Overhead-line private connection boxes for D-type fuses up to 63 A, 500 V, degree of protection IP 54 — 2 стр.
DIN 41673:1979-10
Действует
Miniature fuses; screw type fuse-base, 6,3 A, 250 V, flat, for interchangeable cartridge fuse-links — 2 стр.
DIN 42568:1982-09
Действует
Transformers; outlet valve DN 15 and DN 32 for sampling and discharge — 3 стр.
DIN 43637-5:1977-05
Действует
Overhead line private connection boxes; disk for spacing of conductors in the roof pole stand tube — 3 стр.
DIN 46260-1:1988-09
Действует
Low-voltage stud-terminals; compilation — 6 стр.
DIN EN ISO 14526-1:2000-08
Действует
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999 — 7 стр.
DIN EN ISO 14526-2:2000-08
Действует
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999 — 12 стр.
DIN EN ISO 14526-3:2000-08
Действует
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999); German version EN ISO 14526-3:1999 — 8 стр.
DIN 53748:1970-07
Отменен
Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials — 3 стр.
DIN 41632:1982-08
Отменен
Rotary wafer switches 28 mm × 39 mm; 12 positions; dimensions, ratings, requirements, tests — 15 стр.
DIN 41631:1982-08
Отменен
Rotary wafer switches 41 mm × 54 mm; 13 and 26 positions; dimensions, ratings, requirements, tests — 16 стр.
DIN 41633:1981-05
Отменен
Rotary wafer switches 17 mm diameter; 10 and 12 positions axial soldering; dimensions, ratings, requirements and tests — 13 стр.