Стандарты DIN

DIN 7152:1965-07

Отменен

Formation of Tolerance Zones from ISO Fundamental Allowances for Nominal Dimensions from 1 to 500 mm — 4 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

DIN ISO 286-1:1990-11

Отменен

ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988 — 34 стр.

На этот документ ссылаются

DIN 138:1955-09

Отменен

Metal-cutting Tools; Bores, Keyways and Driving Features for Tools with Parallel Bore and with 1 in 30 Taper Bore — 4 стр.

DIN 7182-1:1971-10

Отменен

Tolerances and Fits; Fundamental Terms — 7 стр.

DIN 7150-1:1966-06

Отменен

ISO System of Limits and Fits for Sizes from 1 to 500 mm; Introduction — 7 стр.

DIN 7172-3:1986-03

Отменен

Tolerances and limit deviations for sizes above 500 mm up to and including 10000 mm; principles — 5 стр.

DIN 9015-1:1986-12

Действует

Aerospace; ISO-fits for airframe construction (except mounting of roller bearings) — 5 стр.

DIN 9015-2:1986-12

Действует

Aerospace; ISO-fits for engine construction (except mounting of roller bearings) — 6 стр.

DIN 58736-1:1982-11

Отменен

Production in optical engineering; centering bells with fitting dimension — 3 стр.

DIN ISO 286-1:1990-11

Отменен

ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988 — 34 стр.

DIN ISO 8015:1986-06

Отменен

Technical drawings; fundamental tolerancing principle; identical with ISO 8015, edition 1985 — 5 стр.

DIN 7178-2:1986-08

Отменен

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone fits — 6 стр.

DIN 7178-4:1986-08

Отменен

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; axial displacements — 5 стр.