Safety of machinery - Minimum gaps to avoid crushing of parts of the human body; German version EN 349:1993+A1:2008, Corrigendum to DIN EN 349:2008-09— 2 стр.
Aerospace series - Pipe coupling 8°30<Minute> in titanium alloy - Elbows 90° bulkhead, long, welded end; German and English version EN 4188:2001— 17 стр.
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery; German version EN 547-1:1996+A1:2008— 20 стр.
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings; German version EN 547-2:1996+A1:2008— 31 стр.
Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces (includes Corrigendum AC:1994 and Amendment A1:1999); German version EN 563:1994 + AC:1994 + A1:1999— 18 стр.
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers; German version EN 626-1:1994+A1:2008, Corrigendum to DIN EN 626-1:2008-09— 2 стр.
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures; German version EN 626-2:1996+A1:2008, Corrigendum to DIN EN 626-2:2008-09— 2 стр.
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays; German version EN 894-2:1997+A1:2008— 27 стр.
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators; German version EN 894-3:2000+A1:2008— 42 стр.
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards; German version EN 953:1997+A1:2009— 38 стр.
Safety of machinery - Safety-related parts of control systems - Part 100: Guide on the use and application of EN 954-1:1996; German version CR 954-100:1999— 6 стр.
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation; German version EN 1005-3:2002+A1:2008— 31 стр.
Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition; German version EN 10025-6:2004+A1:2009— 24 стр.
Hot-rolled products in weldable fine grain structural steels; part 2: delivery conditions for normalized/normalized rolled steels; German version EN 10113-2:1993— 7 стр.
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels; German version EN 10137-2:1995— 7 стр.
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane (ISO 3744:1994); German version EN ISO 3744:2009— 31 стр.
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001); German version EN ISO 5349-1:2001— 27 стр.
Mechanical vibrations - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001); German version EN ISO 5349-2:2001— 37 стр.
Earth-moving machinery and tractors and machinery for agriculture and forestry - Seat index point (ISO 5353:1995); German version EN ISO 5353:1998— 8 стр.
Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests (ISO 6683:2005); German version EN ISO 6683:2008— 12 стр.
Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2008); German version FprEN ISO 7250-1:2009
Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially free field over a reflecting plane (ISO 11201:1995, including Cor 1:1997); German version EN ISO 11201:2009— 18 стр.
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995); German version EN ISO 11688-1:2009— 46 стр.
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000— 30 стр.
Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology - Amendment 1 (ISO 12100-1:2003/Amd 1:2009); German version EN ISO 12100-1:2003/A1:2009— 8 стр.
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles - Amendment 1 (ISO 12100-2:2003/Amd 1:2009); German version EN ISO 12100-2:2003/A1:2009— 11 стр.
