Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 7708-1:1980-12

Отменен
Plastic Moulding Materials; Plastic Products; Concepts — 1 стр.
ОписаниеИзмененияСсылкиВерсии

На этот документ ссылаются

DIN 1530-3:1969-11
Отменен
Ejector pins with countersunk head — 2 стр.
DIN 1530-2:1971-11
Отменен
Ejector pins with parallel head and stepped shaft — 2 стр.
DIN 7708-2:1975-10
Отменен
Types of Plastic Moulding Materials; Phenolic Moulding Materials — 9 стр.
DIN 7708-3:1975-10
Отменен
Types of Plastic Moulding Materials; Aminoplastic Moulding Materials, Aminoplastic/Phenolic Moulding Materials — 9 стр.
DIN 7708-8:1992-02
Отменен
Soft flow thermosetting moulding materials; preparation of specimens and determination of their properties — 6 стр.
DIN 7742-1:1988-01
Действует
Plastic moulding materials; cellulose ester(CA, CP, CAB) thermoplastic moulding materials; classification and designation — 4 стр.
DIN 7745-1:1986-07
Отменен
Plastic moulding materials; polymethylmethacrylate(PMMA) materials; classification and designation — 4 стр.
DIN 7746-1:1986-01
Отменен
Vinyl chloride(VC) polymers; classification and designation — 9 стр.
DIN 7748-1:1985-09
Отменен
Plastic moulding materials; unplasticized polyvinyl chloride (PVC-U) moulding materials; classification and designation — 6 стр.
DIN 7749-1:1985-09
Отменен
Plastic moulding materials; plasticized polyvinyl chloride (PVC-P) moulding materials; classification and designation — 5 стр.
DIN 7741-1:1986-12
Отменен
Plastic moulding materials; polystyrene(PS) moulding materials; classification and designation — 4 стр.
DIN 7741-1:1977-08
Отменен
Plastic moulding materials; polystyrene(PS) moulding materials, classification and designation — 3 стр.
DIN 7744-1:1986-07
Отменен
Plastic moulding materials; polycarbonate(PC) thermoplastics; classification and designation — 5 стр.
DIN 16911:1978-01
Отменен
Plastic Moulding Materials; Polyester Resin Moulding Materials; Types; Requirements; Testing — 7 стр.
DIN 16770-1:1989-02
Отменен
Testing of plastics - Preparation of specimens of thermoplastic moulding materials by compression moulding — 4 стр.
DIN 16776-1:1984-12
Отменен
Plastic moulding materials; polyethylene and ethylene copolymer thermoplastics; classification and designation — 6 стр.
DIN 16749:1986-07
Отменен
Compression moulds and injection moulds; dimensional tolerances for moulding parts — 3 стр.
DIN 16777-1:1987-09
Отменен
PLastic moulding materials; impact resistant acrylonitrile/styrene moulding and extrusion (ASA, AES, ACS) materials; excluding butadiene-modified materials; classification and designation — 4 стр.
DIN 16757:1989-05
Отменен
Compression and injection moulds; sprue puller — 2 стр.
DIN 16927-2:1977-04
Отменен
Sheets of rigid polyvinylchloride (rigid PVC), raised impact strength, high impact strength; technical delivery specifications — 3 стр.
DIN 16752:1971-07
Отменен
Injection moulds for plastics moulding materials; feed bushes — 2 стр.
DIN 16985:1978-03
Отменен
Semi-finished of polyamide 6, 6G, 66 and 12; technical delivery specifications — 3 стр.
DIN 16779-1:1988-01
Отменен
Plastic moulding materials; polyalkylene terephthalate thermoplastics; polyethylene terephthalate (PET) and polybutylene terephthalate (PBT) thermoplastics; classification and designation — 4 стр.
DIN 16781-1:1988-01
Отменен
Plastic moulding materials; polyoxymethylene (POM)-thermoplastics; classification and designation — 4 стр.
DIN 16959:1973-09
Отменен
Sheets of plasticized polyvinylchlorid (PVC); technical delivery specifications — 2 стр.
DIN 16716:1963-08
Отменен
Compression moulds and injection moulds for moulding materials; guide bushes with shoulder — 2 стр.
DIN 16773-1:1985-02
Отменен
Plastic moulding materials; polyamide(PA) homopolymeres for moulding and extrusion; classification and designation — 7 стр.
DIN 16927-1:1977-04
Отменен
Sheets of rigid polyvinylchloride (rigid PVC), normal impact strength; technical delivery specifications — 3 стр.
DIN 16780-1:1988-01
Отменен
Plastic moulding materials; thermoplastic moulding materials of polymeric blends; classification and designation — 5 стр.
DIN 16778-1:1985-01
Отменен
Plastic moulding materials; ethylene vinylacetate copolymer thermoplastics; classification and designation — 6 стр.
DIN 16719:1971-08
Отменен
Compression moulds for plastics moulding materials; plain core pins and bore holes — 1 стр.
DIN 16771-1:1986-12
Отменен
Plastic moulding materials; styrene/butadiene (SB) moulding materials; classification and designation — 4 стр.
DIN 16776-1:1978-04
Отменен
Plastic moulding materials; polyethylene (PE) moulding materials, classification and designation — 3 стр.
DIN 16752-1:1989-05
Отменен
Compression- and injection moulds; sprue bushes — 3 стр.
DIN 16776-2:1978-04
Отменен
Plastic moulding materials; polyethylene (PE) moulding materials, determination of properties — 4 стр.
DIN 16771-1:1977-08
Отменен
Plastic moulding materials; styrene/butadiene (SB) moulding materials, classification and designation — 3 стр.
DIN 16772-1:1977-08
Отменен
Plastic moulding materials; acrylonitrile/butadiene/styrene (ABS) moulding materials, classification and designation — 4 стр.
DIN 16775-1:1977-08
Отменен
Plastic moulding materials; styrene/acrylonitrile (SAN) moulding materials, classification and designation — 2 стр.
DIN 16749:1968-04
Отменен
Moulds for plastics mouldings; tolerances and permissible deviations for compression moulds and injection moulds — 3 стр.
DIN 16913-3:1981-04
Отменен
Plastics; moulding materials; reinforced thermosetting moulding materials; sheet moulding compounds, types; specifications — 5 стр.
DIN 16770-1:1986-05
Отменен
Testing of plastics; test specimens of thermoplastic materials; compression moulding — 4 стр.
DIN 16774-1:1984-12
Отменен
Plastic moulding materials; polypropylene and propylene copolymer thermoplastics; classification and designation — 6 стр.
DIN 16770:1972-09
Отменен
Preparation of test specimens in the form of bars with a defined level of longitudinal reversion after heat storage (longitudinal shrinkage) from amorphous thermoplastic moulding materials — 5 стр.
DIN 16772-1:1987-09
Отменен
Plastic moulding materials; acrylonitrile-butadien-styrene (ABS) materials; classification and designation — 4 стр.
DIN 16770-2:1986-05
Отменен
Testing of plastics; test specimens of thermoplastic materials; injection moulding — 3 стр.
DIN 16770-4:1986-05
Отменен
Testing of plastics; test specimens of thermoplastic materials; preparation of specimens with specified maximum levels of reversion — 3 стр.
DIN 16775-1:1988-12
Отменен
Plastic moulding materials; styrene-acrylonitrile (SAN) moulding materials; classification and designation — 6 стр.
DIN 9825-1:1963-08
Отменен
Guide pins with shoulder for compression moulds and injection moulds — 3 стр.
DIN 65498:1991-10
Действует
Aerospace; polyetherimide (PEI) semi-finished products and moulded parts; technical specification — 18 стр.
DIN 53451:1972-07
Отменен
Plastics; Directions for Preparing Test Specimens of Thermosetting Moulding Materials — 4 стр.
DIN 53482:1967-01
Отменен
Testing of Insulating Materials; Determination of Electrical Resistances Values — 9 стр.
DIN 53477:1965-05
Отменен
Testing of Plastics; Determination of the Particle Size and Particle Distribution of Granular Thermosetting Compression Moulding Materials by Sieve Analysis — 3 стр.
DIN 53458:1968-07
Отменен
Testing of Plastics; Determination of Dimensional Stability under Heat by Martens Method — 2 стр.
DIN 55947:1973-08
Отменен
Paints and Plastics; Common Definitions — 2 стр.
DIN 53453:1975-05
Отменен
Testing of Plastics; Impact Flexural Test — 5 стр.
DIN 53749:1970-07
Отменен
Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State — 3 стр.
DIN 53464:1962-11
Отменен
Testing of Plastics; Determination of Shrinkage Properties of Moulded Materials from Thermosetting Moulding Materials — 2 стр.
DIN 53465:1963-04
Отменен
Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials — 2 стр.
DIN 53713:1971-06
Отменен
Testing of Plastics; Determination of the Water Content of Moulding Materials; Distillation Method — 2 стр.
DIN 53704:1960-07
Отменен
Testing of Plastics; Determination of Free Phenols in Phenolic Mouldings (Semi-quantitative Method) — 1 стр.
DIN 53700:1970-01
Отменен
Testing of Plastics; Determination of Percentage of Acetone Soluble Matter in Phenolic Mouldings — 2 стр.
DIN 53449:1970-09
Отменен
Testing of Plastics; Evaluation of Resistance of Thermoplastics to Environmental Stress Cracking; Steel Ball Impression Method — 5 стр.
DIN 53457:1968-05
Отменен
Testing of Plastics; Determination of the Modulus of Elasticity by Tensile, Compression and Flexural Test — 5 стр.
DIN 53498:1967-02
Отменен
Testing of Plastics; Heat Storage of Compression Mouldings Made of Thermosetting Compression Moulding Materials — 2 стр.
DIN 53462:1965-03
Отменен
Test Apparatus for Determination of Temperature of Deflection Under Load (Martens Method) — 3 стр.
DIN 53462:1987-01
Отменен
Testing of plastics; martens method of determining the temperature of deflection under abending stress — 5 стр.
DIN 55457-2:1986-04
Отменен
Packaging test; containers made from polyolefins; tension cracking resistance; pressure-temperature procedure — 2 стр.
DIN 55457-2:2000-06
Отменен
Packaging test - Containers made from polyolefines - Part 2: Tension cracking resistance; pressure-temperature procedure — 2 стр.
DIN 53415:1989-04
Отменен
Testing of plastics; determination of the bleeding of colorants — 2 стр.
DIN 53466:1984-02
Отменен
Testing of plastics; determination of bulk factor and apparent density of moulding materials — 4 стр.
DIN 53704:1983-06
Отменен
Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method — 4 стр.
DIN 53449-1:1984-05
Отменен
Testing of plastics; evaluation of environmental stress cracking (ESC); ball or pin impression method — 9 стр.
DIN 53448:1977-05
Отменен
Testing of plastics; tensile impact test — 8 стр.
DIN 55958:1988-12
Отменен
Resins; terms and definitions — 3 стр.
DIN 43169:1987-08
Действует
Insulators for pantographs for light rail vehicles and tramcars — 3 стр.
DIN 43560-2:1981-07
Отменен
Fuses for battery powered industrial trucks; fuse-base 80 V — 2 стр.
DIN 46260-1:1988-09
Действует
Low-voltage stud-terminals; compilation — 6 стр.
DIN 24450:1987-02
Действует
Machines for the processing of plastics and rubber; definitions — 19 стр.
DIN 24450:1976-08
Отменен
Machines for the production of plastics and rubber; definitions — 13 стр.
DIN 16782-1:1991-11
Отменен
Polytetrafluoroethylene (PTFE) moulding materials; classification and designation — 4 стр.
DIN 53748:1970-07
Отменен
Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials — 3 стр.
17/30346164 DC
Действует
BS ISO 20457. Plastics moulded parts. Tolerances and acceptance conditions — 38 стр.
DIN 53477:1992-11
Отменен
Testing of plastics; determination of particle size distribution of moulding materials by dry sieving analysis — 3 стр.
DIN 53704:1988-11
Отменен
Testing of plastics; determination of the free phenol in phenolic moulding materials; photometrical method — 3 стр.
DIN 16944:1988-07
Отменен
Glass fibre reinforced reaction resin moulding materials; test methods — 4 стр.
DIN 16742:2013-10
Отменен
Plastics moulded parts - Tolerances and acceptance conditions; Text in German and English — 71 стр.