DIN 50150:1976-12

Отменен

Testing of Steel and Cast Steel; Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength — 5 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

ASTM E181-10

Заменен

Standard Test Methods for Detector Calibration and Analysis of Radionuclides — 21 стр.

DIN 50103-1:1984-03

Отменен

Testing of metallic materials; Rockwell hardness test; C, A, B, F scales — 7 стр.

DIN 50103-2:1984-03

Отменен

Testing of metallic materials; Rockwell hardness test; N and T scales — 7 стр.

DIN 50133-1:1972-12

Отменен

Testing of Metallic Materials; Vickers Hardness Testing; Test Load Range: 49 to 980 N (5 to 100 kp) — 7 стр.

DIN 50145:1975-05

Отменен

Testing of Metallic Materials; Tensile Test — 16 стр.

DIN 50351:1985-02

Отменен

Testing of metallic materials; Brinell hardness test — 7 стр.

DIN 50150:2000-10

Отменен

Testing of metallic materials - Conversion of hardness values — 52 стр.

На этот документ ссылаются

BS ISO 6336-5:2003

Действует

Calculation of load capacity of spur and helical gears. Strength and quality of materials — 52 стр.

DIN 850-2:1990-04

Действует

Woodruff cutters; technical delivery conditions — 6 стр.

DIN 984:1981-09

Отменен

Spring retaining rings with lugs for use in bores (internal circlips) — 10 стр.

DIN 472:1981-09

Отменен

Circlips (retaining rings) for bores; Normal type and heavy type — 12 стр.

DIN 844-2:1990-04

Действует

Parallel shank end mills; technical delivery conditions — 7 стр.

DIN 327-2:1990-04

Действует

Parallel shank slot drills; technical delivery conditions — 5 стр.

DIN 471:1981-09

Отменен

Circlips (retaining rings) for shafts; Normal type and heavy type — 12 стр.

DIN 1823-2:1992-03

Действует

Single-angle cutters for toolmaking; technical delivery conditions — 4 стр.

DIN 983:1981-09

Отменен

Retaining rings with lugs for shafts — 11 стр.

DIN 1880-2:1995-05

Отменен

Shell end mills with tenon and parallel key drive - Part 2: Technical delivery conditions — 6 стр.

DIN 267-24:1983-08

Отменен

Fasteners; technical delivery conditions; property classes for nuts (hardness classes) — 4 стр.

DIN 267-26:1987-10

Отменен

Fasteners; technical delivery conditions; steel spring washers for bolt/nut assemblies — 10 стр.

DIN 1833-2:1990-04

Действует

Parallel shank dovetail cutters; technical delivery conditions — 5 стр.

DIN 842-2:1981-12

Отменен

Shell type single-angle milling cutters; Technical delivery conditions — 3 стр.

DIN 850-2:1981-12

Отменен

Cutters for woodruff key seats; technical specifications — 3 стр.

DIN 1891-2:1981-06

Отменен

Slotting cutters, interlocking and adjustable; technical specifications — 3 стр.

DIN 842-2:1990-01

Действует

Shell type single angle milling cutters; technical delivery conditions — 4 стр.

DIN 1891-2:1981-12

Отменен

Slotting cutters; interlocking and adjustable; technical specifications — 3 стр.

DIN 6518-2:1990-04

Действует

Corner rounding concave milling cutters with parallel shank; technical delivery conditions — 4 стр.

DIN 5401-2:1993-11

Отменен

Rolling bearings - Balls of special materials — 4 стр.

DIN 6513-2:1990-04

Действует

Corner rounding concave cutters; technical delivery conditions — 4 стр.

DIN 73126:1987-03

Действует

Gudgeon pins for reciprocating piston engines; dimensions, types finish, requirements, tests — 14 стр.

DIN 65149:1980-12

Действует

Aerospace; screws of steel for non-structural components, M 3 and M 4, technical specification — 7 стр.

DIN 58298-6:1983-02

Отменен

Materials, finish and testing of medical instruments; conchotome — 3 стр.

DIN 58298-3:1979-07

Отменен

Materials, finish and testing of medical instruments; forceps — 3 стр.

DIN 58298-4:1983-02

Отменен

Materials, finish and testing of medical instruments; bone cutting forceps and rongeurs — 3 стр.

DIN 58298-9:1983-02

Отменен

Materials, finish and testing of medical instruments; explores — 3 стр.

DIN 58298-8:1983-02

Отменен

Materials, finish and testing of medical instruments; retractor — 3 стр.

DIN 58298-1:1983-02

Отменен

Materials, finish and testing of medical instruments; forceps — 3 стр.

DIN 58298-7:1983-02

Отменен

Materials, finish and testing of medical instruments; skalpels and knives — 3 стр.

DIN 58298-10:1983-02

Отменен

Materials, finish and testing of medical instruments; chisels and gouges, bone curettes — 3 стр.

DIN 58298-5:1979-07

Отменен

Materials, finish and testing of medical instruments; forceps — 2 стр.

DIN 58298-2:1981-10

Отменен

Materials, finish and testing of medical instruments; scissors — 4 стр.

DIN 50150:2000-10

Отменен

Testing of metallic materials - Conversion of hardness values — 52 стр.

DIN 51354-2:1990-04

Отменен

Testing of lubricants; FZG gear test rig; method A/8,3/90 for lubricating oils — 10 стр.

DIN 2609:1991-02

Отменен

Steel butt-welding pipe fittings; technical delivery conditions — 11 стр.

DIN 2175:1998-09

Отменен

Cold-forming taps - Technical delivery conditions for high-speed steel cold-forming taps — 11 стр.

DIN 2197:1998-09

Отменен

Screwing taps - Technical delivery conditions for grinded high-steel taps — 17 стр.

DIN 2094:1996-08

Отменен

Road vehicles leaf springs - Requirements, testing — 11 стр.

DIN 2328-2:1981-06

Отменен

End mills with 7/24 taper shank; technical specifications — 3 стр.

DIN 3990-5:1987-12

Действует

Calculation of load capacity of cylindrical gears; endurance limits and material qualities — 19 стр.

DIN 2328-2:1981-12

Отменен

End mills 7/24 taper shank; technical specifications — 3 стр.

DIN 17022-2:1986-06

Действует

Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools — 19 стр.

DIN 17022-1:1994-10

Действует

Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components — 17 стр.

DIN 17022-3:1989-04

Действует

Heat treatment of ferrous materials; heat treatment methods; case hardening — 23 стр.

DIN 17111:1980-09

Отменен

Low Carbon Unalloyed Steels for Bolts, Nuts and Rivets; Technical Conditions of Delivery — 10 стр.

DIN 18257:1991-03

Отменен

Building hardware; security door plates concepts and definitions, dimensions, requirements, testing and labeling — 8 стр.

DIN 22258-2:1993-01

Отменен

Chain connectors; kenter type connector units; dimensions, requirements, testing — 3 стр.

DIN 22258-1:1993-01

Отменен

Chain connectors; flat type connector units; dimensions, requirements, testing — 5 стр.

DIN 22258-3:1993-01

Отменен

Chain connectors; block type connector units; dimensions, requirements, testing — 3 стр.

DIN 22253:1987-09

Отменен

Chain connectors; shackle type connector units; dimensions, requirements, testing — 10 стр.

DIN 22256:1991-08

Отменен

Sprocket rings and sprocket assemblies for chain conveyors and coal ploughs; dimensions, requirements, testing — 7 стр.

DIN 58298-12:1994-04

Отменен

Materials, finish and testing of medical instruments; hand saws — 5 стр.

DIN 1831-2:1990-04

Отменен

Inserted tooth side and face milling cutters; technical delivery consitions — 4 стр.

DIN 1892-2:1990-04

Отменен

Interlocking cylindrical cutters; technical delivery conditions — 4 стр.

DIN 852-2:1990-02

Отменен

Bore type thread milling cutters for ISO metric threads; technical delivery conditions — 4 стр.

DIN 1891-2:1990-04

Отменен

Interlocking slotting cutters; technical delivery conditions — 5 стр.

DIN 1889-5:1990-04

Отменен

Die-sinking cutters; technical delivery conditions — 8 стр.

DIN 326-2:1990-01

Отменен

Slot drills with Morse taper shank; technical delivery conditions — 5 стр.

DIN 884-2:1990-05

Отменен

Cylindrical milling cutters; technical delivery conditions — 4 стр.

DIN 1893-2:1990-04

Отменен

Side and face thread milling cutters for ISO metric trapezoidal threads; technical delivery conditions — 4 стр.

DIN 1890-2:1990-04

Отменен

Straight relieved tooth slotting cutters; technical delivery conditions — 4 стр.

DIN 69844-2:1995-02

Отменен

ANS-end mills with parallel shank - Part 2: Technical delivery conditions — 13 стр.

DIN 845-2:1990-04

Отменен

Morse taper shank end mills; technical delivery conditions — 6 стр.

DIN 851-3:1990-05

Отменен

T-slot cutters; technical delivery conditions — 5 стр.

BS ISO 14635-1:2000

Действует

Gears. FZG test procedures. FZG test method A/8, 3/90 for relative scruffing load-carrying capacity of oils — 26 стр.

DIN 855-2:1990-05

Отменен

Concave milling cutters; technical delivery conditions — 4 стр.

DIN 885-2:1990-05

Отменен

Side milling cutters; technical delivery conditions — 5 стр.

DIN 856-2:1990-05

Отменен

Convex milling cutters; technical delivery conditions — 4 стр.

DIN 847-2:1990-05

Отменен

Double equal-angle milling cutters; technical delivery conditions — 4 стр.

DIN 1834-2:1990-04

Отменен

Narrow side and face milling cutters; technical delivery conditions — 5 стр.

DIN EN 623-2:1993-11

Отменен

Advanced technical ceramics; monolithic ceramics; general and textural properties; part 2: determination of density and porosity; German version EN 623-2:1993 — 6 стр.