Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 2614:1990-02

Отменен
Cement mortar linings for ductile iron and steel pipes and fittings; application, requirements and testing — 15 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 1045:1988-07
Отменен
Structural use of concrete - Design and construction — 84 стр.
DIN 1048-1:1991-06
Отменен
Testing concrete; testing of fresh concrete — 5 стр.
DIN 1164-1:1986-12
Отменен
Portland cement, Portland blastfurnace cement, blastfurnace slag cement and trass cement; terminology, constituents, requirements, delivery — 5 стр.
DIN 1164-3:1978-11
Отменен
Portland-, Iron Portland-, Blast-furnace-, and Trass Cement; Determination of Composition — 8 стр.
DIN 1164-7:1978-11
Отменен
Portland-, Iron Portland-, Blast-furnace-, and Trass Cement; Determination of Strength — 4 стр.
DIN 1986-3:1982-07
Отменен
Drainage and sewerage systems for buildings and plots of land; Rules for service and maintenance — 4 стр.
DIN 2460:1980-12
Отменен
Steel Pipes for Water Pipelines — 7 стр.
DIN 4030:1969-11
Отменен
Evaluation of Liquids, Soils and Gases, Aggressive to Concrete — 6 стр.
DIN 4188-1:1977-10
Отменен
Screening surfaces; wire screens for test sieves, dimensions — 4 стр.
DIN 4226-1:1983-04
Отменен
Aggregates for concrete; aggregates of dense structure (heavy aggregates); terminology, designation and requirements — 8 стр.
DIN 4226-3:1983-04
Отменен
Aggregates for concrete; testing of heavy and lightweight aggregates
DIN 19690:1978-07
Отменен
Technical Conditions of Delivery for Ductile; Cast Iron Pipes and Special Castings for Sewers and Sewage Pipelines — 4 стр.
DIN 19691:1978-07
Отменен
Ductile Cast Iron Pipes with Plug Socket for Sewers and Sewage Pipelines; Dimensions — 2 стр.
DIN 19692-1:1978-07
Отменен
Special Castings of Ductile Cast Iron with Plug Sockets for Sewers and Sewage Pipelines; Double Socket Straight Access Pieces with Rectangular Aperture (RS Pieces); Summary — 1 стр.
DIN 19692-2:1978-07
Отменен
Special Castings of Ductile Cast Iron with Plug Sockets for Sewers and Sewage Pipelines; Double Socket Straight Access Pieces with Rectangular Aperture (RS Pieces); Components — 3 стр.
DIN 19803:1977-09
Отменен
Cast iron special castings for asbestos cement pressure pipelines; flanged spigots — 2 стр.
DIN 19804:1977-09
Отменен
Cast iron special castings for asbestos cement pressure pipelines; tapers — 4 стр.
DIN 19805:1977-09
Отменен
Cast iron special castings for asbestos cement pressure pipe lines; bends — 3 стр.
DIN 19806:1977-09
Отменен
Cast iron special castings for asbestos cement pressure pipelines; branches — 4 стр.
DIN 19807:1977-09
Отменен
Cast iron special castings for asbestos cement pressure pipelines; joining pieces at cast iron pipes — 2 стр.
DIN 28600:1983-01
Отменен
Ductile iron pressure pipes and fittings for gas and water pipelines; technical delivery conditions — 12 стр.
DIN 1164-2:1978-11
Отменен
Portland-, Iron Portland-, Blast-furnace-, and Trass Cement; Control (Quality Control) — 2 стр.
DIN 28610-1:1983-01
Отменен
Ductile iron pressure pipes with socket with cement-mortar lining for gas and water pipelines; dimensions and masses — 8 стр.
DIN 28614:1990-01
Отменен
Ductile iron pipes with cast-on flanges for use with gas and water pipelines; dimensions and mass — 3 стр.
DIN 28615:1976-03
Отменен
Pressure pipes with flanges of ductile cast iron; for gas and water supply pipelines, dimensions and masses — 2 стр.
DIN 28622:1990-01
Отменен
Ductile iron flanged socket pieces for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28623:1990-01
Отменен
Ductile iron flanged spigot pieces for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28624:1990-01
Отменен
Ductile iron collars for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28625:1990-01
Отменен
Ductile iron double socket 90° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28626:1990-01
Отменен
Ductile iron double socket 45° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28627:1990-01
Отменен
Ductile iron double socket 30° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28628:1990-01
Отменен
Ductile iron double socket 22 1/2° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28629:1990-01
Отменен
Ductile iron double socket 11 1/2° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28630:1990-01
Отменен
Ductile iron double socket tees with flange branch for use with gas and water pipes; dimensions and mass — 4 стр.
DIN 28632:1990-01
Отменен
Ductile iron double socket tees with socket branch for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28634:1990-01
Отменен
Ductile iron double socket tapers for use with gas and water pipes; dimensions and mass — 4 стр.
DIN 28637:1990-01
Отменен
Ductile iron double-flanged 90° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28638:1990-01
Отменен
Ductile iron double-flanged 90° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28639:1990-01
Отменен
Ductile iron double-flanged 45° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28643:1990-01
Отменен
Ductile iron all-flanged tees for use with gas and water pipes; dimensions and mass
DIN 28645:1990-01
Отменен
Ductile iron double-flanged tapers for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28646:1990-01
Отменен
Ductile iron blank flanges for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28648:1990-01
Отменен
Ductile iron castings for gas and water pressure pipelines; EN-fittings; socket <(hoch)1>/<(Index)4> duckfoot bends; application, dimensions and masses — 2 стр.
DIN 38404-8:1985-09
Отменен
German standard methods for the examination of water, waste water and sludge; physical and physical-chemical parameters (group C); determination of the electrical conductivity (C 8) — 11 стр.
DIN 38404-10:1995-04
Отменен
German standard methods for the examination of water, waste water and sludge - Physical and physico-chemical parameters (group C) - Part 10: Calcit saturation of water (C 10) — 34 стр.
DIN 50049:1986-08
Отменен
Materials testing certificates — 4 стр.
DIN 50900-1:1982-04
Отменен
Corrosion of metals; Terminology; General concepts — 6 стр.
DIN 50929-1:1985-09
Отменен
Corrosion of metals; probability of corrosion of metallic materials when subject to corrosion from the outside; general — 5 стр.
DIN 50930-1:1980-12
Отменен
Corrosion of metals; corrosion behaviour of metallic materials against water, generals — 4 стр.
DIN 50930-2:1980-12
Отменен
Corrosion of metals; corrosion behaviour of metallic materials against water, scale for evaluation for unalloyed and low-alloyed iron materials — 5 стр.
DIN 55928-4:1991-05
Отменен
Corrosion protection of steel structures by the application of organic or metallic coatings; preparation and testing of surfaces — 16 стр.
DIN ISO 3733:1980-12
Отменен
Petroleum products and bituminous materials; determination of water, distillation method — 8 стр.
DIN 2880:1999-01
Действует
Application of cement mortar lining for cast iron pipes, steel pipes and fittings — 17 стр.
DIN EN 545:1995-01
Отменен
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:1994 — 47 стр.
DIN EN 545:2002-09
Отменен
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:2002 — 86 стр.
DIN EN 10298:2005-12
Действует
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005 — 30 стр.

На этот документ ссылаются

DIN 30674-2:1992-10
Отменен
Cement mortar coatings for ductile iron pipes; requirements and testing — 7 стр.
DIN EN 545:1995-01
Отменен
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods; German version EN 545:1994 — 47 стр.
DIN EN 10298:2005-12
Действует
Steel tubes and fittings for onshore and offshore pipelines - Internal lining with cement mortar; German version EN 10298:2005 — 30 стр.
DIN 50902:1994-07
Отменен
Coatings for corrosion protection of metals; vocabulary, processes and surface preparation — 10 стр.
DIN 50930-2:1993-02
Отменен
Corrosion of metals; corrosion of metallic materials under corrosion load by water inside of tubes, tanks and apparatus; evaluation of the corrosion likelihood of unalloyed and low-alloy iron materials — 5 стр.
DIN 2880:1999-01
Действует
Application of cement mortar lining for cast iron pipes, steel pipes and fittings — 17 стр.
DIN 4279-3:1990-06
Отменен
Internal hydrostatic pressure testing of water pressure pipes; ductile cast iron pressure pipes and steel pipes with cement mortar lining — 4 стр.
DIN 2460:1992-01
Отменен
Steel water pipes — 11 стр.
DIN 28633:1996-07
Отменен
Ductile iron castings for gas and water pressure pipelines - IT-fittings - All plane end tees; application, dimensions and masses (weights) — 3 стр.
DIN 28614:1990-01
Отменен
Ductile iron pipes with cast-on flanges for use with gas and water pipelines; dimensions and mass — 3 стр.
DIN 28615-1:1990-01
Отменен
Ductile iron pipes with welded-on flanges for use with gas and water pipelines; dimensions and mass — 3 стр.
DIN 28627:1990-01
Отменен
Ductile iron double socket 30° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28630:1990-01
Отменен
Ductile iron double socket tees with flange branch for use with gas and water pipes; dimensions and mass — 4 стр.
DIN 28629:1990-01
Отменен
Ductile iron double socket 11 1/2° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28622:1990-01
Отменен
Ductile iron flanged socket pieces for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28637:1990-01
Отменен
Ductile iron double-flanged 90° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28638:1990-01
Отменен
Ductile iron double-flanged 90° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28639:1990-01
Отменен
Ductile iron double-flanged 45° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28645:1990-01
Отменен
Ductile iron double-flanged tapers for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28628:1990-01
Отменен
Ductile iron double socket 22 1/2° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28624:1990-01
Отменен
Ductile iron collars for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28632:1990-01
Отменен
Ductile iron double socket tees with socket branch for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28615-2:1990-01
Отменен
Ductile iron pipes with screwed-on flanges for use with gas and water pipelines; dimensions and mass — 3 стр.
DIN 28625:1990-01
Отменен
Ductile iron double socket 90° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28631:1996-07
Отменен
Ductile iron fittings for gas and water pipelines - MI-fittings - Socketed spigots with plane end branch; application, dimensions and masses (weights) — 3 стр.
DIN 28626:1990-01
Отменен
Ductile iron double socket 45° bends for use with gas and water pipes; dimensions and mass — 3 стр.
DIN 28634:1990-01
Отменен
Ductile iron double socket tapers for use with gas and water pipes; dimensions and mass — 4 стр.
DIN 28643:1990-01
Отменен
Ductile iron all-flanged tees for use with gas and water pipes; dimensions and mass
DIN 28648:1990-01
Отменен
Ductile iron castings for gas and water pressure pipelines; EN-fittings; socket <(hoch)1>/<(Index)4> duckfoot bends; application, dimensions and masses — 2 стр.
DIN 28623:1990-01
Отменен
Ductile iron flanged spigot pieces for use with gas and water pipes; dimensions and mass — 3 стр.