Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 50115:1991-04

Отменен
Notched bar impact testing of metallic materials using test pieces other than ISO test pieces — 3 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN EN 10045-1:1991-04
Отменен
Charpy impact test on metallic materials; part 1: test method; german version EN 10045-1:1990 — 8 стр.
DIN ISO 13022:2013-07
Отменен
Medical products containing viable human cells - Application of risk management and requirements for processing practices (ISO 13022:2012)
ASTM A370-10
Заменен
Standard Test Methods and Definitions for Mechanical Testing of Steel Products — 47 стр.
DIN EN ISO 148-1:2011-01
Отменен
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009); German version EN ISO 148-1:2010 — 35 стр.
DIN EN ISO 148-1 Beiblatt 1:2014-02
Действует
Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces — 6 стр.
DIN 50115:1975-02
Отменен
Testing of Metallic Materials; Notched Bar Impact Bending Test — 5 стр.

На этот документ ссылаются

DIN 1681:1967-06
Отменен
Steel Castings for General Use; Quality Specifications — 6 стр.
DIN 685-3:1981-11
Отменен
Tested round steel link chains; testing — 4 стр.
DIN 1690-1:1985-05
Отменен
Technical delivery conditions for castings made from metallic materials; general conditions — 6 стр.
DIN 1654-1:1980-03
Отменен
Steels for Cold Heading and Cold Extruding; Technical Conditions of Delivery; General — 17 стр.
DIN 1652-4:1990-11
Отменен
Bright steel made from steel for quenching and tempering; technical delivery conditions — 10 стр.
DIN 1736-2:1980-04
Отменен
Welding filler metals for nickel and nickel alloys; Test piece, specimens, mechanical-technological properties — 3 стр.
DIN 1693-2:1977-10
Отменен
Cast Iron with Nodular Graphite; Unalloyed and Low Alloy Grades; Properties in Cast-on Test Piece — 4 стр.
DIN 1652-2:1990-11
Отменен
Bright steel made from structural steel; technical delivery conditions — 7 стр.
DIN 582:1971-04
Отменен
Lifting Eye Nuts — 2 стр.
DIN 1693-1:1973-10
Отменен
Cast Iron with Nodular Graphite; Unalloyed and Low Alloy Grades — 5 стр.
DIN 580:1972-03
Отменен
Lifting Eye Bolts — 3 стр.
DIN 1913-2:1976-05
Отменен
Covered electrodes for joint welding unalloyed and low-alloyed steels; testing of electrodes, weld metal tests — 2 стр.
DIN 15400:1978-11
Отменен
Lifting hooks for lifting appliances; Mechanical properties, lifting capacities, stresses and materials — 7 стр.
DIN 15175:1988-03
Отменен
Industrial trucks; fork arms for fork lift trucks; requirements and testing — 4 стр.
DIN 15404-1:1979-03
Отменен
Lifting hooks; technical conditions for forged hooks — 4 стр.
DIN 15175:1984-02
Отменен
Industrial trucks; fork arms for high lift trucks; safety requirements, other requirements, testing — 3 стр.
DIN 15404-2:1979-03
Отменен
Lifting hooks; technical conditions for laminated hooks — 3 стр.
DIN 8554-1:1976-03
Отменен
Gas Welding Rods for Joint Welding of Unalloyed and Low-alloy Steels; Designation, Technical Conditions of Delivery — 5 стр.
DIN 8575-3:1970-09
Отменен
Filler Metals for Arc Welding High-temperature Steels; Testing of Filler Metals, Weld Metal Test Specimens — 3 стр.
DIN 8554-3:1976-03
Отменен
Gas Welding Rods for Joint Welding of Unalloyed and Low-alloy Steels; Proof Testing under Fabrication Conditions — 2 стр.
DIN EN ISO 148-1 Beiblatt 1:2014-02
Действует
Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces — 6 стр.
DIN 65038-1:1980-11
Отменен
Aerospace; bars of steel, nickel alloys and cobalt alloys for aircraft, technical specification — 5 стр.
DIN 65034:1987-11
Отменен
Aerospace; castings of steel, nickel- and cobalt alloys; technical specification — 23 стр.
DIN 65034:1992-06
Действует
Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design — 23 стр.
DIN 65035:1989-10
Отменен
Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specifications — 24 стр.
DIN EN 286-2:1992-11
Действует
Simple unfired pressure vessels designed to contain air or nitrogen; part 2: pressure vessels for air braking and auxiliary systems for motor-vehicles and their trailers; german version EN 286-2:1992 — 37 стр.
DIN 82003-2:1972-02
Отменен
Cargo Lifting Gear; Accessories and Fittings; Technical Conditions of Delivery — 3 стр.
DIN 82003-1:2010-10
Действует
Shipbuilding - Components for lifting, towing and lashing - Part 1: Overview — 10 стр.
DIN 82003-2:2010-10
Действует
Shipbuilding - Components for lifting, towing and lashing - Part 2: Technical terms of delivery — 10 стр.
DIN ISO 898-1:1979-04
Отменен
Mechanical Properties of Fasteners; Part 1: Bolts, Screws and Studs — 16 стр.
DIN EN 10045-2:1993-01
Отменен
Metallic materials; Charpy impact test; part 2: verification of the testing machine (pendulum impact); german version EN 10045-2:1992 — 19 стр.
DIN 50122:1973-09
Отменен
Testing of Steel; Notched Bar Impact Bending Test on Fusion-Welded Butt Joints; Specimen Position, Test Report — 2 стр.
DIN 50122:1984-08
Отменен
Testing of metallic materials; impact test on welded joints; specimen position, notch position — 4 стр.
DIN 50115:1975-02
Отменен
Testing of Metallic Materials; Notched Bar Impact Bending Test — 5 стр.
DIN 51222:1985-01
Отменен
Materials testing machines; pendulum impact testing machines — 9 стр.
DIN 51306:1983-09
Отменен
Material testing machines; verification of pendulum impact testing machines — 10 стр.
DIN 2528:1991-06
Отменен
Steel flanges; technical delivery conditions — 12 стр.
DIN 4930:1988-09
Отменен
Freezing pipes for use in shaft sinking; dimensions and technical delivery conditions — 4 стр.
DIN 3549:1981-12
Отменен
Steam traps; acceptance test and certificates — 2 стр.
DIN 4000-23:1981-10
Отменен
Tabular layouts of article characteristics for materials, iron and steel — 4 стр.
DIN 4930-1:1973-10
Отменен
Pipes for the freezing process of shaft sinking; measures and technical terms of delivery — 3 стр.
DIN 17102:1983-10
Отменен
Weldable normalized fine grain structural steels; technical delivery conditions for plate, strip, wide flats, sections and bars — 15 стр.
DIN 17864:1973-11
Отменен
Forgings of Titanium and Wrought Titanium Alloys (Open Die and Drop Forgings) — 2 стр.
DIN 17860:1973-11
Отменен
Sheet and Strip of Titanium and Wrought Titanium Alloys — 2 стр.
DIN 17155:1983-10
Отменен
Creep resistant steel plate and strip; technical delivery conditions — 16 стр.
DIN 17135:1964-03
Отменен
Non-aging Steels; Quality Specifications — 6 стр.
DIN 17103:1989-10
Отменен
Weldable fine grain structural steel forgings; technical delivery conditions — 16 стр.
DIN 17243:1987-01
Отменен
Weldable heat resisting steel forgings and rolled or forged steel bars; technical delivery conditions — 18 стр.
DIN 17862:1993-02
Отменен
Titanium and titanium alloy bars; technical delivery conditions — 12 стр.
DIN 17440:1985-07
Отменен
Stainless steels; technical delivery conditions for plate and sheet, hot rolled strip, wire rod, drawn wire, steel bars, forgings and semi-finished products — 26 стр.
DIN 17125:1986-05
Отменен
Square and rectangular fine grain steel tubes (hollow sections) for structural steelwork; technical delivery conditions — 8 стр.
DIN 17445:1969-02
Отменен
Stainless Steel Castings; Quality Specifications — 7 стр.
DIN 17245:1977-10
Отменен
Ferritic Steel Castings Creep Resistant at Elevated Temperatures; Technical Conditions of Delivery — 16 стр.
DIN 17230:1980-09
Отменен
Ball and Roller Bearing Steels; Technical Conditions of Delivery — 17 стр.
DIN 17124:1986-05
Отменен
Seamless circular fine grain steel tubes for structural steelwork; technical delivery conditions — 9 стр.
DIN 17445:1984-11
Отменен
Stainless steel castings; technical delivery conditions — 11 стр.
DIN 17120:1984-06
Отменен
Welded circular steel tubes for structural steelwork; technical delivery conditions — 8 стр.
DIN 17440:1972-12
Отменен
Stainless Steels; Quality Specifications — 25 стр.
DIN 17200:1969-12
Отменен
Quenched and Tempered Steels; Quality Specifications — 20 стр.
DIN 17022-1:1994-10
Действует
Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components — 17 стр.
DIN 17212:1972-08
Отменен
Flame and Induction Hardening Steels; Quality Specifications — 14 стр.
DIN 17121:1984-06
Отменен
Seamless circular steel tubes for structural steelwork; technical delivery conditions — 7 стр.
DIN 17100:1980-01
Отменен
Steels for General Structural Purposes; Quality Standard — 19 стр.
DIN 17211:1987-04
Отменен
Nitriding steels - Technical delivery conditions — 14 стр.
DIN 17155-1:1959-01
Отменен
Boiler Plates; Technical Conditions of Delivery — 4 стр.
DIN 17862:1973-11
Отменен
Rods of Titanium and Wrought Titanium Alloys — 2 стр.
DIN 17200:1987-03
Отменен
Steels for quenching and tempering; technical delivery conditions — 40 стр.
DIN 17155-2:1959-01
Отменен
Boiler Plates; Quality Specifications for the Steels Used — 3 стр.
DIN 17123:1986-05
Отменен
Welded circular fine grain steel tubes for structural steelwork; technical delivery conditions — 9 стр.
DIN 17280:1985-07
Отменен
Steels with low temperature toughness; technical delivery conditions for plate, sheet, strip, wide flats, sections, bars and forgings — 17 стр.
DIN 17864:1993-02
Отменен
Titanium and titanium wrought alloys forgings (hammer and drop forgings); technical delivery conditions — 16 стр.
DIN 17211:1970-08
Отменен
Nitriding Steels; Quality Specifications — 10 стр.
DIN 17172:1978-05
Отменен
Steel Pipes for Long-distance Pipelines for Combustible Liquids and Gases; Technical Conditions of Delivery — 13 стр.
DIN 17240:1976-07
Отменен
Heat Resisting and Highly Heat Resisting Materials for Bolts and Nuts; Quality Specifications — 24 стр.
DIN 17200:1984-11
Отменен
Steels for quenching and tempering; technical delivery conditions — 40 стр.
DIN 17864:2012-03
Действует
Titanium and titanium wrought alloys forgings (hammer and drop forgings) - Technical specification — 28 стр.
DIN 17862:2012-03
Действует
Titanium and titanium alloy bars - Technical specification — 32 стр.
DIN 22252-2:1973-12
Отменен
Hih-tensile Round-link Steel Chains for Mining; Testing — 4 стр.
DIN 22252:1983-09
Отменен
Calibrated and tested round steel link chains for conveyors and machines used in mining — 12 стр.
DIN 21545:1961-08
Отменен
Support of Mine Workings; Steel Sections for Mining; Testing — 2 стр.
DIN 22258-1:1980-03
Отменен
Connecting chain links; flat connecting links, dimensions, mechanical requirements, testing — 4 стр.
DIN 22258-2:1983-09
Отменен
Connecting chain links; "Kenter" connecting links; dimensions, mechanical requirements, testing — 4 стр.
DIN 22258-3:1983-09
Отменен
Connecting chain links; block connecting links; dimensions, mechanical requirements, testing — 4 стр.
DIN 21521-2:1993-02
Действует
Rock bolts for mining and tunnel support; general specifications for steel-bolts; tests, testing methods — 7 стр.
DIN 21550:1959-12
Отменен
Inspection of strut caps for lining construction of roadways — 3 стр.
DIN 21539:1965-08
Отменен
Supports of steel for the roadway support; marking — 2 стр.
DIN 21544:1985-01
Отменен
Steel for mine support sections; technical delivery conditions — 3 стр.
DIN 22256:1991-08
Отменен
Sprocket rings and sprocket assemblies for chain conveyors and coal ploughs; dimensions, requirements, testing — 7 стр.
DIN 32525-1:1981-12
Отменен
Testing filler metals by means of weld metal specimens; Arc welded test pieces, Specimens for mechanical-technological tests — 3 стр.
DIN 51222:1995-06
Отменен
Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <kleiner => 50 J and verification — 3 стр.
DIN 21530-3:2003-05
Отменен
Mine support - Part 3: Requirements — 16 стр.
DIN 21530-4:2003-05
Отменен
Mine support - Part 4: Testing — 22 стр.
DIN EN ISO 148-1:2011-01
Отменен
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009); German version EN ISO 148-1:2010 — 35 стр.
DIN 65123:2017-08
Действует
Aerospace Series - Methods for inspection of metallic components, produced with additive powderbed fusion processes — 19 стр.
DIN 65123:2017-02
Отменен
Aerospace Series - Methods for inspection of metallic components, produced with additive powderbed fusion processes — 19 стр.
DIN 65035:1993-11
Отменен
Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specification — 24 стр.
DIN 17860:2010-01
Отменен
Titanium and titanium alloy strip, sheet and plate - Technical conditions of delivery — 23 стр.