Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN ISO 8062:1998-08

Отменен
Castings - System of dimensional tolerances and machining allowances (ISO 8062:1994) — 15 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN ISO 286-1:1990-11
Отменен
ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988 — 34 стр.
DIN ISO 1302:1993-12
Отменен
Technical drawings - Method of indicating surface texture; Identical with ISO 1302:1992
ÖNORM EN ISO 286-1:2014-06
Заменен
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013)
ÖNORM EN ISO 1101:2014-03
Заменен
Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013)
DIN ISO 13022:2013-07
Отменен
Medical products containing viable human cells - Application of risk management and requirements for processing practices (ISO 13022:2012)
DIN EN ISO 5459:2013-05
Действует
Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011); German version EN ISO 5459:2011 — 99 стр.
DIN EN ISO 10135:2010-02
Действует
Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) — 66 стр.
DIN EN ISO 8062-1:2008-01
Действует
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007 — 37 стр.
DIN EN ISO 8062-3:2007-10
Отменен
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2006); German version EN ISO 8062-3:2007 — 37 стр.
DIN CEN ISO/TS 8062-2*DIN SPEC 91184:2014-03
Действует
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013); German version CEN ISO/TS 8062-2:2013

На этот документ ссылаются

DIN CEN ISO/TS 8062-2:2014-03
Действует
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules (ISO/TS 8062-2:2013); German version CEN ISO/TS 8062-2:2013 — 66 стр.
DIN 1212-1:2003-05
Действует
Step irons with upstand for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete — 4 стр.
DIN 1212-3:2003-05
Отменен
Step irons with upstand for staggered manhole steps - Part 3: Bolted-on step irons — 7 стр.
DIN 1211-2:2003-05
Действует
Step irons for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units — 4 стр.
DIN 1211-3:2003-05
Отменен
Step irons for staggered manhole steps - Part 3: Bolted-on step irons — 7 стр.
DIN 1211-1:2003-05
Действует
Step irons for staggered manhole steps - Part 1: Step irons to be fitted in masonry or set into concrete — 4 стр.
DIN 1239:1999-02
Действует
Coverings for wells, spring water chambers and other water supply construction - Principles for construction — 8 стр.
DIN 1212-2:2003-05
Действует
Step irons with upstand for staggered manhole steps - Part 2: Step irons to be set into prefabricated concrete units — 4 стр.
DIN 504:2004-09
Действует
Driving components - Eye-type bearings — 4 стр.
DIN 506:2004-09
Действует
Driving components - Cap-bearings, half bearings - Fastening with four screws — 6 стр.
DIN 390:2002-04
Действует
Hand-wheels, dished - Hub hole with straight square — 3 стр.
DIN 737:2011-06
Действует
Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with tapered bore and adapter sleeve — 11 стр.
DIN 738:2011-06
Действует
Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with cylindrical bore — 11 стр.
DIN 739:2011-06
Действует
Rolling bearings - Plummer block housings for rolling bearings of diameter series 3 with cylindrical bore — 11 стр.
DIN 736:2011-06
Действует
Rolling bearings - Plummer block housings for rolling bearings of diameter series 2 with tapered bore and adapter sleeve — 11 стр.
DIN 468:2003-10
Действует
Crank handles, offset type — 4 стр.
DIN 505:2004-09
Действует
Driving components - Cap bearings, half bearings - Fastening with two screws — 6 стр.
DIN 469:2003-10
Отменен
Crank handles, straight pattern — 4 стр.
DIN 6318:2002-10
Действует
Stepped packing blocks as support for clamps — 4 стр.
DIN 14461-5:2008-02
Действует
Delivery valve installations for firefighting purposes - Part 5: Tap PN 16 connected with firefigthing pipes — 7 стр.
DIN EN 14874:2006-02
Действует
Inland navigation vessels - Studless anchor chain - Cable lifter; German version EN 14874:2005 — 15 стр.
DIN 86021:2002-07
Действует
Cast flanges of copper alloys - Principles of design for nominal pressure 10, 16, 25 — 4 стр.
DIN 86264:2000-10
Действует
Straight way valves for shipboard use - Y-patten, soft sealing, short type with flanges - DN 15 to DN 200 — 5 стр.
DIN 86066:2002-07
Отменен
Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10 — 4 стр.
DIN 86263:2000-10
Действует
Straight way valves for shipboard use - Y-patten, soft sealing, with socket connection - DN 15 to DN 50, PN 16 — 5 стр.
DIN 86266:2002-06
Отменен
Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10 — 6 стр.
DIN 86265:2000-10
Действует
Straight way valves for shipboard use - Y-patten, soft sealing, normal type, with flanges - DN 15 to DN 200 — 5 стр.
DIN 86266:2006-11
Действует
Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10 — 6 стр.
DIN 87101:2003-10
Действует
Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 - Mating dimensions for flanges according to PN 10 — 5 стр.
DIN 81315:2004-09
Действует
Strike-cases for door-locks used on ships — 9 стр.
DIN 82003-1:2010-10
Действует
Shipbuilding - Components for lifting, towing and lashing - Part 1: Overview — 10 стр.
DIN 82003-2:2010-10
Действует
Shipbuilding - Components for lifting, towing and lashing - Part 2: Technical terms of delivery — 10 стр.
DIN EN 12883:2001-02
Действует
Founding - Equipment for the production of lost patterns for the lost wax casting process; German version EN 12883:2000 — 11 стр.
DIN EN ISO 8062-3:2007-10
Отменен
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2006); German version EN ISO 8062-3:2007 — 37 стр.
DIN EN ISO 8062-1:2008-01
Действует
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007 — 37 стр.
DIN 3376-2:2005-02
Действует
Gasmeter connections - Part 2: One pipe connection; DVGW code of practice — 28 стр.
DIN 3376-1:2005-02
Действует
Gas meter connections - Part 1: Two pipes connection; DVGW code of practice — 16 стр.
DIN 3319:2002-04
Действует
Hand-wheels, dished - Hub hole with tapered square — 3 стр.
DIN 3220:2002-04
Действует
Hand-wheels, flat type - Hub hole with tapered square — 3 стр.
DIN 3670:2000-03
Отменен
Hand wheels, disk type — 4 стр.
DIN 87901:2001-12
Отменен
Sniffle valves for pumps — 3 стр.
DIN 86201:2000-09
Отменен
Fittings for international shore connection of fire extinguishing installations on ships - Nominal pressure 16 — 4 стр.
DIN EN 1097-2:2010-07
Отменен
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation; German version EN 1097-2:2010 — 36 стр.