Стандарт DIN 7829:2008-06

DIN 82200-2:1964-10

Отменен

Blocks for Wire Ropes for Shipping Purposes; Technical conditions of Delivery — 3 стр.

DIN 63301:1969-12

Отменен

Cup square bolts with enlarged head (bolts for looms) — 1 стр.

DIN 46262-2:1974-10

Отменен

Low-voltage stud-terminals; bushing studs — 3 стр.

DIN 87106:1975-06

Отменен

Locking Devices for Non-return Flaps in accordance with DIN 87101 — 3 стр.

DIN 58553:1979-03

Отменен

Needle holders for drawing instruments — 3 стр.

DIN 42533-2:1969-01

Отменен

Indoor and Outdoor Transformer Bushings; Insulation Class 10 N to 30 N, 1000 to 3150 A; Single Parts — 5 стр.

DIN 2240-2:1977-09

Отменен

Gauge Handles for Gauging Member over 40 mm Nominal Diameter Handles, Cheese Head Screws and Clamps — 4 стр.

DIN 2509:1970-11

Отменен

Double End Studs — 1 стр.

DIN 2240-3:1979-06

Отменен

Gauge Handles for Gauging Members for Precision Engineering — 4 стр.

DIN 4626:1977-06

Отменен

Laminated Leaf Springs; Spring Centre Bolts — 2 стр.

DIN 20633-1:1980-01

Отменен

Monorails for mining; turnbuckles, of open pattern — 4 стр.

DIN 22412:1962-01

Отменен

Slit-bolts — 2 стр.

DIN 21547:1970-01

Отменен

Round head bolts with oval shoulder for mine supports — 1 стр.

DIN 22424:1955-04

Отменен

Firedamp-proof and explosion-proof instruments; three-square bolts — 2 стр.

DIN 21346:1973-09

Отменен

Square head bolts for wooden shaft guides — 1 стр.

DIN 22114:1977-11

Отменен

Belt conveyors for underground coal mining; heavy construction — 9 стр.

DIN 22114:1992-10

Отменен

Belt conveyors for underground coalmining; heavy construction — 11 стр.

DIN 22419-1:1985-09

Отменен

Electrical apparatus for (potentially) explosive atmospheres for mining; increased safety "e"; cable entries; basic design; safety requirements and testing — 8 стр.

DIN 22424:1989-04

Отменен

Electrical apparatus for potentially explosive atmospheres for mining; triangle head bolts — 5 стр.

DIN 25197:1977-11

Отменен

Cap bolts for railway vehicles — 2 стр.

DIN 28135:1972-03

Отменен

Axial thrust washers for flange couplings of vertical shafts for agitators — 1 стр.

DIN 28502-3:1962-04

Отменен

Cast iron pipes and special castings for pressure main lines; bolted-gland joint; bolts and nuts — 1 стр.

DIN 7817-1:1979-03

Отменен

Rims for motor vehicles and trailers, flange J, JK and K — 4 стр.

DIN 7990:1971-01

Отменен

Hexagon Bolts with Hexagon Nuts for Steel Structures — 3 стр.

DIN 7985:1984-12

Отменен

Cross recessed raised cheese head screws — 5 стр.

DIN 7977:1977-02

Отменен

Taper Pins with Thread Ends and Constant Point Lengths — 3 стр.

DIN 7984:1970-12

Отменен

Hexagon Socket Head Cap Screws with Reduced Height of Head — 2 стр.

DIN 7985:1986-07

Отменен

Cross recessed raised cheese head screws — 5 стр.

DIN 7820:1978-12

Отменен

5° tapered rims for trucks, buses and trailers; rim-diameter 15, 20, 24 — 2 стр.

DIN 6914:1979-03

Отменен

Hexagon Bolts with Large Widths across Flats for High-tensile Bolting in Steel Structures — 3 стр.

DIN 7991:1986-01

Отменен

Hexagon socket countersunk head cap screws — 6 стр.

DIN 5903-2:1967-11

Отменен

Fish bolts with square head — 2 стр.

DIN 6332:1981-01

Отменен

Grub screws with thrust point — 3 стр.

DIN 7969:1970-12

Отменен

Countersunk Head Bolts with Slot; without Nut, with Hexagon Nut, for Steel Structures — 2 стр.

DIN 7824:1979-02

Отменен

Rims for motor scooters and passenger cars — 2 стр.

DIN 6320:1971-02

Отменен

Feet with Threaded Shank for Jigs and Fixtures — 1 стр.

DIN 7991:1985-05

Отменен

Hexagon socket countersunk head screws — 6 стр.

DIN 7817-2:1979-03

Отменен

Rims for motor vehicles and trailers, hump types — 2 стр.

DIN 7829:1986-12

Отменен

Rims and wheels; marking — 3 стр.

DIN 7990:1989-10

Отменен

Hexagon head bolts for structural steel bolting for supply with nut — 6 стр.

DIN 7964:1990-07

Отменен

Reduced shank bolts and screws with coarse thread — 6 стр.

DIN 7964:1988-03

Отменен

Bolts and screws with ISO metric thread and reduced shank — 6 стр.

DIN 6332:1980-07

Отменен

Grub screws with thrust point — 3 стр.

DIN 7968:1971-01

Отменен

Hexagon Fitting Bolts; without Nut, with Hexagon Nut, for Steel Structures — 3 стр.

DIN 7816:1983-01

Отменен

Rims for motorcycles and side cars; nominal rim diameters 16, 17, 18 and 19 in — 3 стр.

DIN 7992:1970-12

Отменен

T-head Bolts with Large Head — 1 стр.

DIN 7969:1989-10

Отменен

Slotted countersunk head screws for structural steel bolting for supply with or without nut — 5 стр.

DIN 7827:1980-03

Отменен

Rims for agricultural vehicles (implements, trailers and for multiple use) — 4 стр.

DIN 6912:1967-12

Отменен

Hexagon Socket Head Cap Screws; Shallow Head, with Pilot Recess for Wrench Key — 2 стр.

DIN 7991:1970-01

Отменен

Hexagon Socket Countersunk (Flat) Head Cap Screws; Metric Thread, Metric Fine Thread — 2 стр.

DIN 7985:1990-08

Отменен

Cross recessed raised cheese head screws — 5 стр.

DIN 7968:1989-10

Отменен

Hexagon fit bolts for structural steel bolting for supply with or without nut — 6 стр.

DIN 6367:1972-02

Отменен

Cutter Retaining Screws for Milling Machine Arbors — 1 стр.

DIN 7829:1970-02

Отменен

Rims and wheels; marking — 1 стр.

DIN 7964:1977-04

Отменен

Hexagon Screws with Reduced Shank — 2 стр.

DIN 71803:1967-12

Отменен

Angle joints with screw retention and spring retention; ballstuds — 1 стр.

DIN 71753:1964-02

Отменен

Hexagon bolts with reduced threaded portion — 1 стр.

DIN 11014:1968-07

Действует

Agricultural equipment; countersunk double-nip bolts, sinkings, metric thread, finish — 1 стр.

DIN 15134:1992-12

Отменен

Industrial trucks; split wheels for pneumatic tyres; safety requirements and test — 4 стр.

DIN 558:1987-09

Отменен

M 5 to M 36 hexagon head screws threaded up to the head; product grade C — 4 стр.

DIN 316:1983-06

Отменен

Wing screws — 4 стр.

DIN 933:1983-12

Отменен

M 1,6 to M 52 hexagon head screws with thread up to the head; product grades A and B (modified version of ISO 4017) — 10 стр.

DIN 961:1983-12

Отменен

Hexagon bolts with M 8 Ч 1 to M 52 Ч 3 fine threads; product grades A and B — 6 стр.

DIN 926:1972-08

Отменен

Slotted Headless Screws with Full Dog Point — 2 стр.

DIN 960:1990-01

Отменен

M 8 Ч 1 to M 100 Ч 4 hexagon head bolts with fine pitch tread; product grades A and B — 8 стр.

DIN 933:1970-12

Отменен

Hexagon Screws; Thread Approximately to Head, Metric Thread, Types m and mg — 3 стр.

DIN 962:1975-09

Отменен

Screws, Bolts, Studs and Nuts; Additional Types and Finishes; Details of Order and Dimensions — 6 стр.

DIN 84:1990-08

Отменен

Product grade A slotted cheese head screws — 4 стр.

DIN 966:1990-08

Отменен

Cross recessed raised countersunk head screws — 5 стр.

DIN 912:1983-12

Отменен

Hexagon socket head cap screws (modified version of ISO 4762) — 12 стр.

DIN 316:1970-11

Отменен

Wing Screws — 2 стр.

DIN 78:1975-09

Отменен

Thread Ends, Lengths of Projection of Thread Ends for ISO Metric Threads according to DIN 13 — 5 стр.

DIN 85:1988-10

Отменен

Slotted pan head screws; product grade A — 5 стр.

DIN 797:1970-11

Отменен

Special Foundation Bolts — 1 стр.

DIN 921:1972-08

Отменен

Slotted Pan Head Screws with Large Head — 2 стр.

DIN 960:1970-11

Отменен

Hexagon Bolts; Metric Fine Thread, Types m and mg — 3 стр.

DIN 938:1972-12

Отменен

Studs, Metal End <ca> 1 d — 3 стр.

DIN 186:1970-11

Отменен

T-Head Bolts with Square Neck — 2 стр.

DIN 551:1972-02

Отменен

Slotted Set Screws with Chamfered Ends — 2 стр.

DIN 610:1971-01

Отменен

Hexagon Fitting Bolts with Short Threaded Portion — 4 стр.

DIN 479:1968-07

Отменен

Square Head Bolts with Half Dog Point; Metric Screw Thread, Metric Fine Screw Thread — 1 стр.

DIN 561:1967-12

Отменен

Hexagon Set Screws with Full Dog Point, with Small Hexagon and Threaded to Head; Metric Screw Thread, Metric Fine Screw Thread — 1 стр.

DIN 553:1972-02

Отменен

Slotted Set Screws with Cone End — 2 стр.

DIN 961:1970-11

Отменен

Hexagon Bolts; Thread Approximately to Head, Metric Fine Thread, Types m and mg — 2 стр.

DIN 609:1971-01

Отменен

Hexagon Fitting Bolts with Long Threaded Portion — 4 стр.

DIN 561:1985-02

Отменен

Hexagon head set screws with small hexagon and full dog point — 4 стр.

DIN 964:1990-08

Отменен

Slotted raised countersunk head screws — 6 стр.

DIN 406-2:1980-04

Отменен

Dimensioning on drawings; rules — 20 стр.

DIN 417:1972-02

Отменен

Slotted Set Screws with Full Dog Point — 2 стр.

DIN 480:1968-03

Отменен

Square Head Bolts with Collar and Half Dog Point with Rounded End; Metric Thread — 1 стр.

DIN 781:1973-12

Действует

Machine tools; numbers of teeth of change gears — 2 стр.

DIN 601:1987-09

Отменен

M 5 to M 52 hexagon head bolts; product grade C — 8 стр.

DIN 39:1962-10

Отменен

Fixed Ball Handles — 2 стр.

DIN 609:1984-07

Отменен

Hexagon fit bolts with long threaded dog point — 8 стр.

DIN 933:1987-09

Отменен

M 1,6 to M 52 hexagon head screws threaded up to the head; product grades A and B — 9 стр.

DIN 924:1972-08

Отменен

Slotted Countersunk (Oval) Head Screws with Full Dog Point — 2 стр.

DIN 465:1970-12

Отменен

Slotted Knurled Thumb Screws — 2 стр.

DIN 610:1984-07

Отменен

Hexagon fit bolts with short threaded dog point — 8 стр.

DIN 529:1972-12

Отменен

Stone Bolts — 3 стр.

DIN 84:1988-10

Отменен

Slotted cheese head screws; product grade A — 5 стр.

Каталог стандартов

DIN 7829:2008-06

Ссылочные документы

На этот документ ссылаются