DIN 480:1985-02

Отменен

Square head bolts with collar and oval half dog point — 4 стр.

Ссылочные документы

DIN ISO 4759-1:1980-05

Отменен

Tolerances for fasteners - Part 1, bolts, screws and nuts with thread diameters <grцЯer => 1,6 <kleiner => 150 mm and product grades A, B and C — 18 стр.

DIN ISO 898-1:1979-04

Отменен

Mechanical Properties of Fasteners; Part 1: Bolts, Screws and Studs — 16 стр.

DIN ISO 272:1979-10

Действует

Fasteners; Width across Flats for Hexagon Products — 4 стр.

DIN 267-19:1984-10

Отменен

Fasteners; technical delivery conditions; surface discontinuities on bolts and screws — 15 стр.

DIN 267-10:1977-03

Отменен

Fasteners; Technical Conditions of Delivery; Hot Dip Galvanized Parts — 3 стр.

DIN 267-9:1979-08

Отменен

Mechanical Fasteners; Technical Conditions of Delivery, Components with Electroplated Coatings — 20 стр.

DIN 267-5:1984-01

Отменен

Fasteners; technical delivery conditions; acceptance inspection — 9 стр.

DIN 267-2:1984-11

Отменен

Fasteners; technical delivery conditions; design and dimensional accuracy — 4 стр.

DIN 267-1:1982-08

Отменен

Fasteners; Technical delivery conditions; General requirements — 3 стр.

DIN 78:1983-12

Отменен

Thread ends and lengths of projection of bolt ends for ISO metric threads in accordance with DIN 13 — 5 стр.

DIN 76-1:1983-12

Отменен

Thread run-outs and thread undercuts for ISO metric threads in accordance with DIN 13 — 5 стр.

DIN 13-15:1982-08

Отменен

ISO metric screw threads; Fundamental deviations and tolerances for screw threads from 1 mm diameter upwards — 6 стр.

DIN 962:1983-12

Отменен

Bolts, screws, studs and nuts; designations; types and finishes — 10 стр.

DIN 480:2016-08

Действует

Square head bolts with collar and short dog point with rounded end — 7 стр.

DIN 480:1968-03

Отменен

Square Head Bolts with Collar and Half Dog Point with Rounded End; Metric Thread — 1 стр.

На этот документ ссылаются

DIN 480:1968-03

Отменен

Square Head Bolts with Collar and Half Dog Point with Rounded End; Metric Thread — 1 стр.

DIN 810:1986-11

Действует

Machine tools; presses; slide holes for shanks of press tools; dimensions — 2 стр.

DIN 480:2016-03

Отменен

Square head bolts with collar and short dog point with rounded end — 7 стр.

DIN 480:2016-08

Действует

Square head bolts with collar and short dog point with rounded end — 7 стр.