Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 17155:1983-10

Отменен
Creep resistant steel plate and strip; technical delivery conditions — 16 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 10167:2004-03
Отменен
Detection of Escherichia coli O 157 in meat and meat products — 11 стр.
DIN 15435-3:1992-04
Действует
Power transmission engineering; drum brakes; brake linings — 3 стр.
DIN 17010:1985-06
Отменен
General technical delivery conditions for steel and steel products — 9 стр.
DIN 50049:1992-04
Отменен
Metallic products; types of inspection documents; products; german version of EN 10204:1991 — 6 стр.
DIN 50115:1991-04
Отменен
Notched bar impact testing of metallic materials using test pieces other than ISO test pieces — 3 стр.
DIN EN 10028-1:1993-04
Отменен
Flat products made from steel for pressure purposes; part 1: general requirements; german version EN 10028-1:1992 — 9 стр.
DIN EN 10028-2:1993-04
Отменен
Flat products made from steel for pressure purposes; part 2: non-alloy and alloy steels with specified elevated temperature properties; german version EN 10028-2:1992 — 12 стр.
DIN 17155-1:1959-01
Отменен
Boiler Plates; Technical Conditions of Delivery — 4 стр.
DIN 17155-2:1959-01
Отменен
Boiler Plates; Quality Specifications for the Steels Used — 3 стр.
DIN 17155-2 Beiblatt:1969-06
Отменен
Boiler Plates; Long-time High-temperature Strength — 2 стр.

На этот документ ссылаются

DIN 1913-1:1976-01
Отменен
Filler Electrodes for Joint Welding of Unalloyed and Low Alloy Steels; Classification, Designation, Technical Conditions of Delivery — 8 стр.
DIN 1913-1:1984-06
Отменен
Covered electrodes for the joint welding of unalloyed and low alloy steel; classification, designation, technical delivery conditions — 10 стр.
DIN 1016:1972-11
Отменен
Flat Products of Steel; Hot Rolled Strip, Hot Rolled Sheet Under 3 mm Thickness, Dimensions, Permissible Variations on Dimension, Form and Weight — 9 стр.
DIN 1614-1:1986-03
Отменен
Steel flat products; hot rolled sheet and strip; technical delivery conditions; mild unalloyed steels for cold reducing — 4 стр.
DIN 1614-2:1986-03
Отменен
Steel flat products; hot rolled sheet and strip; technical delivery conditions; mild unalloyed steels for immediate cold forming — 5 стр.
DIN 1016:1987-06
Отменен
Steel flat products; hot rolled sheet and strip; limit deviations, form and mass tolerances — 7 стр.
DIN 6608-1:1989-09
Отменен
Horizontal single-wall steel tanks for the underground storage of flammable and non-flammable water polluting liquids — 6 стр.
DIN 6618-1:1989-09
Отменен
Vertical single-wall steel tanks for the above ground storage of flammable and non-flammable water polluting liquids — 10 стр.
DIN 6624-1:1989-09
Действует
Horizontal single-wall steel tanks with capacities between 1000 and 5000 litres, for the above ground storage of flammable and non-flammable water polluting liquids — 5 стр.
DIN 6625-1:1989-09
Отменен
Steel tanks erected on site, for the above ground storage of hazardous flammable water polluting liquids of class A III and of non-flammable water polluting liquids; requirements and testing — 4 стр.
DIN 6616:1989-09
Отменен
Horizontal single-wall and double-wall steel tanks for the above ground storage of flammable and non-flammable water polluting liquids — 10 стр.
DIN 6601:1991-10
Отменен
Resistance of materials of steel tanks against liquids (positiv-list of liquids) — 66 стр.
DIN 8554-1:1986-05
Отменен
Unalloyed and low alloy filler rods for gas welding; designation, technical delivery conditions — 5 стр.
DIN 8559-1:1984-07
Отменен
Filler metals for gas-shielded arc welding; wire electrodes, filler wires, solid rods and solid wires for gas-shielded arc welding of unalloyed and alloyed steels — 8 стр.
DIN 8553:1991-02
Отменен
Joining of clad steel plate by welding; requirements and design — 12 стр.
DIN 8575-1:1970-09
Отменен
Filler Metals for Arc Welding High-temperature Steels; Designation, Application, Technical Conditions of Delivery — 7 стр.
DIN 8554-1:1976-03
Отменен
Gas Welding Rods for Joint Welding of Unalloyed and Low-alloy Steels; Designation, Technical Conditions of Delivery — 5 стр.
DIN 8559-1:1976-06
Отменен
Filler Metals for Gas-shielded Arc Welding; Wire Electrodes and Filler Wires for Gas-shielded Metal Arc Welding of Unalloyed and Low-alloy Steels — 6 стр.
DIN 8575-1:1984-04
Отменен
Filler metals for arc welding of creep-resisting steels; classification, designation, technical delivery conditions — 11 стр.
DIN 10502-1:1992-07
Отменен
Containers for liquid foodstuffs; requirements to the technical quality; materials and constructive features — 5 стр.
DIN 8575-1:1983-12
Отменен
Filler metals for arc welding of steels for creep-resisting; classification, designation, technical conditions of delivery — 11 стр.
DIN 58950-2:1987-04
Отменен
Sterilization; steam-sterilizers for pharmaceutical products; apparatus requirements — 22 стр.
DIN 58948-2:1987-10
Отменен
Sterilization; gas sterilizers; ethyleneoxide-big-sterilizers; requirements — 8 стр.
DIN EN 10028-2:1993-04
Отменен
Flat products made from steel for pressure purposes; part 2: non-alloy and alloy steels with specified elevated temperature properties; german version EN 10028-2:1992 — 12 стр.
DIN EN 10028-1:1993-04
Отменен
Flat products made from steel for pressure purposes; part 1: general requirements; german version EN 10028-1:1992 — 9 стр.
DIN 44837:1988-01
Отменен
Factory tests - Tests after repair and certification of operational experience of instrumentation and control devices for the safety system — 10 стр.
DIN 2609:1991-02
Отменен
Steel butt-welding pipe fittings; technical delivery conditions — 11 стр.
DIN 3339:1984-01
Отменен
Valves; body component materials — 11 стр.
DIN 2528:1991-06
Отменен
Steel flanges; technical delivery conditions — 12 стр.
DIN 3158:1987-12
Отменен
Valves for use in refrigerating systems; safety requirements, testing and marking — 19 стр.
DIN 3354-1:1982-06
Отменен
Butterfly valves; General data — 6 стр.
DIN 3548-1:1993-10
Отменен
Flanged steam traps — 3 стр.
DIN 3381:1984-06
Отменен
Safety devices for gas supply installations operating at working pressures up to 100 bar; pressure relief governors and safety shut-off devices — 15 стр.
DIN 4702-1:1990-03
Отменен
Boilers for central heating; terms, requirements, testing, marking — 25 стр.
DIN 4133:1991-11
Отменен
Steel stacks — 27 стр.
DIN 4811-4:1990-08
Отменен
Pressure regulators for LPG; regulators and safety devices with unregulated inlet pressure for appliances with LPG-cylinders — 10 стр.
DIN 17135:1964-03
Отменен
Non-aging Steels; Quality Specifications — 6 стр.
DIN 17243:1987-01
Отменен
Weldable heat resisting steel forgings and rolled or forged steel bars; technical delivery conditions — 18 стр.
DIN 19605:1975-09
Отменен
Filters for Water Treatment — 6 стр.
DIN 17155-2 Beiblatt:1969-06
Отменен
Boiler Plates; Long-time High-temperature Strength — 2 стр.
DIN 17155-1:1959-01
Отменен
Boiler Plates; Technical Conditions of Delivery — 4 стр.
DIN 17155-2:1959-01
Отменен
Boiler Plates; Quality Specifications for the Steels Used — 3 стр.
DIN 19207:1985-07
Отменен
Flow measurement; threaded pipe ends and accessories for differential pressure devices based on differential pressure methods — 6 стр.
DIN 19207:1993-01
Отменен
Flow measurement; threaded pipe end and accessories for differential pressure devices on differential pressure methods — 7 стр.
DIN 19211:1993-01
Отменен
Flow measurement; condensation chambers for differential pressure devices — 4 стр.
DIN 25452:1992-04
Отменен
Mechanical design of fuel element storage pool in nuclear power plants with light-water reactors — 31 стр.
DIN 25420-3:1990-11
Отменен
Construction of concrete hot cells; requirements for shielding windows for concrete walls with different densities — 7 стр.
DIN 25420-4:1990-11
Отменен
Construction of concrete hot cells; requirements for shielding windows for concrete walls density 2,3 g/cm<(hoch)3> with different densities — 8 стр.
DIN 28141:1992-01
Отменен
Connecting flange for agitator vessels of carbon and stainless steel — 8 стр.
DIN 28011:1987-05
Отменен
Torospherical dished ends — 11 стр.
DIN 28053:1988-11
Отменен
Chemical apparatus; metallic substrates and semi-finished products to receive organic coatings and linings — 8 стр.
DIN 28038:1989-02
Отменен
Flanges for welding, with cylindrical hub, for use on stainless steel pressure vessels — 5 стр.
DIN 28030-1:1989-02
Отменен
Flanged joints for chemical apparatus; design and construction — 7 стр.
DIN 28124-2:1992-12
Отменен
Manhole closures for pressure vessels of non-alloy steel — 8 стр.
DIN 28124-3:1989-03
Отменен
Manhole closures for use on stainless steel pressure vessels — 7 стр.
DIN 28036:1989-02
Отменен
Flanges for welding for use on stainless steel pressure vessels — 3 стр.
DIN 28020:1998-04
Отменен
Horizontal pressure vessels 0,63 m<(hoch)3> up to 25 m<(hoch)3> - Dimensions — 25 стр.
DIN 28122:1987-09
Отменен
Blank flanges with stainless steel facing, of nominal sizes DN 125 to DN 500 and rated for nominal pressures PN 10 to PN 40 — 4 стр.
DIN 28022:1998-04
Отменен
Vertical pressure vessels - Vessels for plants 0,063 m<(hoch)3> to 25 m<(hoch)3> - Dimensions — 28 стр.
DIN 28021:1992-08
Отменен
Horizontal pressure vessels of 6,3 m<(hoch)3> up to 100 m<(hoch)3> capacity for storage purposes — 21 стр.
DIN 28021:1998-04
Отменен
Vertical pressure vessels - Vessels for storage, 6,3 m<(hoch)3> up to 100 m<(hoch)3> - Dimensions — 24 стр.
DIN 28032:1989-06
Отменен
Flanges for welding for use on unalloyed steel pressure vessels — 4 стр.
DIN 28145-7:1987-11
Отменен
Welded attachments for steel, glass-lined agitator vessels; bracket supports welded to jackets; dimensions, maximum permissible loads — 9 стр.
DIN 28013:1987-05
Отменен
Ellipsoidal dished ends — 11 стр.
DIN 28136-4:1987-05
Отменен
Mixing vessels; wall thicknesses for unalloyed and stainless steel mixing vessels — 6 стр.
DIN 28020:1992-09
Отменен
Horizontal pressure vessels of 0,63 m<(hoch)3> up to 25 m<(hoch)3> capacity — 22 стр.
DIN 28034:1989-02
Отменен
Weld-neck flanges for use on unalloyed steel pressure vessels — 4 стр.
DIN 28022:1992-08
Отменен
Vertical pressure vessels of 0,063 m<(hoch)3> to 25 m<(hoch)3> capacity for use in chemical process engineering — 27 стр.
DIN 28121:1984-06
Отменен
Flanged holder for circular viewing glasses for permissible operating overpressures PN 10 and 25 — 6 стр.
DIN 28126:1989-04
Отменен
DN 125 bow closures for process equipment — 10 стр.
DIN 28013:1993-01
Отменен
Ellipsoidal heads — 11 стр.
DIN 28136-4:1993-09
Отменен
Agitated vessels of carbon and stainless steel; wall thickness — 7 стр.
DIN 28117:1990-02
Отменен
PN 10 to PN 40 loose flanges — 5 стр.
DIN 28081-4:1988-01
Отменен
Steel profile supports for vessels; maximum permissible moments on the vessel wall due to profile support loads — 8 стр.
DIN 28124-2:1989-03
Отменен
Manhole closures for use on unalloyed steel pressure vessels — 7 стр.
DIN 28124-3:1992-12
Отменен
Manhole closures for pressure vessels of stainless steel — 9 стр.
DIN 28124-2:1975-08
Отменен
Manhole closures for carbon steel pressure vessels, PN 10 to 25 bar — 2 стр.
DIN 28125-1:1989-04
Отменен
Hinged covers, round; DN 150 to DN 600 — 20 стр.
DIN 28032:1989-02
Отменен
Weld flanges for pressure vessels and process apparatus of non-alloy steel — 4 стр.
DIN 28127:1987-03
Действует
Flow funnels for half-pipe coil jackets for vessels — 2 стр.
DIN 28125-1:1985-05
Отменен
Hinged covers, round; DN 150 to DN 600 — 19 стр.
DIN 28122:1975-07
Отменен
Blind flanges with weld-on stainless steel plating — 2 стр.
DIN 26021:1987-10
Отменен
Tank wagons and tank containers - Domes of tanks for chemical products - Assembly dimensions and components — 4 стр.
DIN 28124-3:1975-08
Отменен
Manhole closures for stainless steel pressure vessels; PN 10 to 25 bar — 3 стр.
DIN 28125-3:1985-05
Отменен
Hinged covers, circular shape with protection ring and surface coated; DN 500 and DN 600 — 8 стр.
DIN 28128:1979-11
Отменен
Half-pipe coil jackets for chemical equipment — 7 стр.
DIN 28117:1976-05
Отменен
Block flanges; connecting dimensions for nominal pressure 10 bar up to 40 bar — 3 стр.
DIN 28125:1958-03
Отменен
— 2 стр.
DIN 28021:1985-05
Отменен
Vertical pressure vessels; vessels for storage, 6,3 up to 100 m<(hoch)3> — 21 стр.
DIN 28011:1993-01
Отменен
Torispherical heads — 11 стр.
DIN 28125-2:1985-05
Отменен
Hinged covers, elliptical 350 mm Ч 450 mm — 10 стр.
DIN 6623-1:1989-09
Отменен
Vertical single-wall steel tanks with less than 1000 litre capacity, for the above ground storage of flammable and non-flammable water polluting liquids — 5 стр.
DIN 28125-3:1989-04
Отменен
Hinged covers; circular shape with protection ring and surface coated; DN 500 and DN 600 — 10 стр.
DIN 28125-2:1989-04
Отменен
Hinged covers; elliptical, 350 mm × 450 mm — 10 стр.
DIN 28125-1:1989-08
Отменен
DN 150 to DN 600 round hinged closures — 20 стр.