Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 267-5:1986-02

Отменен
Fasteners; technical delivery conditions; acceptance inspection; modified version of ISO 3269, 1984 edition — 8 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN ISO 4759-1:1980-05
Отменен
Tolerances for fasteners - Part 1, bolts, screws and nuts with thread diameters <grцЯer => 1,6 <kleiner => 150 mm and product grades A, B and C — 18 стр.
DIN ISO 898-1:1989-01
Отменен
Mechanical properties of fasteners; bolts, screws and studs; identical with ISO 898-1:1988 — 17 стр.
DIN ISO 898-2:1981-03
Отменен
Mechanical properties of fasteners; part 2: nuts with specified proof load values — 15 стр.
DIN ISO 898-5:1980-09
Отменен
Mechanical properties of fasteners; part 5, set screws and similar threaded fasteners not under tensile stresses — 7 стр.
DIN 267-11:1980-01
Отменен
Fasteners; technical delivery conditions (with additions to ISO 3506); corrosion-resistant stainless steel fasteners — 12 стр.
DIN 267-12:1971-11
Отменен
Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Technical Conditions of Delivery; Self-Tapping Screws — 2 стр.
DIN 267-15:1983-11
Отменен
Fasteners; technical delivery conditions; prevailing torque type nuts — 11 стр.
DIN 267-18:1981-02
Отменен
Fasteners; Technical Conditions of Delivery; Components Made of Non-ferrous Metals — 6 стр.
DIN 267-19:1984-10
Отменен
Fasteners; technical delivery conditions; surface discontinuities on bolts and screws — 15 стр.
DIN 267-20:1984-10
Отменен
Fasteners; technical delivery conditions; surface discontinuities on nuts — 9 стр.
DIN 267-21:1981-06
Отменен
Fasteners; technical delivery conditions; widening test for nuts — 2 стр.
DIN 267-23:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts with fine thread (ISO classes) — 9 стр.
DIN 267-24:2007-10
Действует
Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values — 6 стр.
DIN 267-4:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts (previous classes) — 8 стр.
DIN 40080:1979-04
Отменен
Sampling procedures and tables for inspection by attributes — 62 стр.
DIN ISO 2859-1 Berichtigung 1:2008-02
Отменен
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859-1:1999 including Technical Corrigendum 1:2001), Corrigenda to DIN ISO 2859-1:2004-01 — 4 стр.
DIN EN ISO 3506-4:2003-10
Отменен
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2003); German version EN ISO 3506-4:2003 — 22 стр.
BS ISO 3534-1:2006
Действует
Statistics. Vocabulary and symbols. General statistical terms and terms used in probability — 116 стр.
DIN ISO 3269:1992-12
Отменен
Fasteners; acceptance inspection; identical with ISO 3269:1988 — 9 стр.
DIN 267-5:1984-01
Отменен
Fasteners; technical delivery conditions; acceptance inspection — 9 стр.

На этот документ ссылаются

DIN 186:1987-01
Отменен
T-head bolts with square neck — 4 стр.
DIN 522:1980-08
Отменен
Washers; technical delivery conditions — 5 стр.
DIN 186:1988-04
Отменен
T-head bolts with square neck — 4 стр.
DIN 653:1986-09
Отменен
Knurled thin thumb screws — 4 стр.
DIN 439-1:1987-10
Отменен
Unchamfered hexagon thin nuts; product grade B — 4 стр.
DIN 926:1986-09
Отменен
Slotted set screws with full dog point — 4 стр.
DIN 935-3:1987-10
Отменен
Hexagon slotted nuts with metric coarse pitch thread; product grade C — 4 стр.
DIN 571:1986-12
Отменен
Hexagon head wood screws — 2 стр.
DIN 982:1987-05
Отменен
Prevailing torque type hexagon nuts with nonmetallic insert — 4 стр.
DIN 940:1983-03
Отменен
Studs; metal end <ca> 2,5 d — 4 стр.
DIN 316:1983-06
Отменен
Wing screws — 4 стр.
DIN 970:1982-07
Отменен
Hexagon nuts; Style 1; Metric coarse thread, Product grades A and B; ISO 4032 modified — 6 стр.
DIN 562:1987-09
Отменен
Square thin nuts; product grade B — 2 стр.
DIN 434:1990-04
Отменен
Square taper washers for use with channel sections — 3 стр.
DIN 985:1977-09
Отменен
Hexagon Nuts; Self-locking, Thin Type — 2 стр.
DIN 927:1986-09
Отменен
Slotted shoulder screws — 3 стр.
DIN 986:1977-09
Отменен
Hexagon Domed Cap Nuts; Self-locking — 2 стр.
DIN 525:1986-09
Отменен
Weld studs — 3 стр.
DIN 1587:1987-06
Отменен
Hexagon domed cap nuts — 5 стр.
DIN 553:1986-09
Отменен
Slotted set screws with cone point (modified version of ISO 7434, edition 1983) — 5 стр.
DIN 1436:1978-11
Отменен
Pins with Large Head, Type mg — 3 стр.
DIN 1433:1977-02
Отменен
Pins without Head, Type m — 3 стр.
DIN 267-19:1984-10
Отменен
Fasteners; technical delivery conditions; surface discontinuities on bolts and screws — 15 стр.
DIN 937:1983-12
Отменен
Hexagon thin castle nuts (previous design) — 4 стр.
DIN 1471:1978-11
Отменен
Grooved Pins, Full Length Taper-grooved — 4 стр.
DIN 439-2:1987-10
Отменен
Chamfered hexagon thin nuts; product grades A and B — 5 стр.
DIN 427:1986-09
Отменен
Slotted headless screws with chamfered end — 4 стр.
DIN 960:1983-12
Отменен
Hexagon bolts with M 8 Ч 1 to M 100 Ч 4 fine threads; product grades A and B — 8 стр.
DIN 920:1986-09
Отменен
Slotted pan head screws with small head — 4 стр.
DIN 961:1990-01
Отменен
M 8 Ч 1 to M 52 Ч 3 hexagon head bolts with fine pitch thread; product grades A and B — 6 стр.
DIN 933:1987-09
Отменен
M 1,6 to M 52 hexagon head screws threaded up to the head; product grades A and B — 9 стр.
DIN 1476:1978-11
Отменен
Round Head Grooved Pins — 4 стр.
DIN 558:1987-09
Отменен
M 5 to M 36 hexagon head screws threaded up to the head; product grade C — 4 стр.
DIN 906:1992-01
Отменен
Hexagon socket pipe plugs — 3 стр.
DIN 964:1985-05
Отменен
Slotted raised countersunk (oval) head screws (with countersunk head as specified in ISO 2010-1972) — 6 стр.
DIN 522:1990-03
Отменен
Metal washers; technical delivery conditions — 6 стр.
DIN 267-1:1982-08
Отменен
Fasteners; Technical delivery conditions; General requirements — 3 стр.
DIN 986:1987-06
Отменен
Prevailing torque type hexagon domed cap nuts with nonmetallic insert — 4 стр.
DIN 964:1990-08
Отменен
Slotted raised countersunk head screws — 6 стр.
DIN 548:1986-09
Отменен
Round nuts with set pin holes in side — 3 стр.
DIN 267-12:1971-11
Отменен
Bolts, Screws, Nuts and Similar Threaded and Formed Parts; Technical Conditions of Delivery; Self-Tapping Screws — 2 стр.
DIN 908:1992-01
Отменен
Hexagon socket screw plugs — 3 стр.
DIN 439-2:1983-12
Отменен
Hexagon thin nuts with M 1,6 to M 52 and M 8 Ч 1 to M 52 Ч 3 threads (modified version of ISO 4035) — 6 стр.
DIN 464:1986-09
Отменен
Knurled thumb screws — 4 стр.
DIN 934:1982-07
Отменен
Hexagon nuts; Metric screw threads; Product grades A and B — 8 стр.
DIN 1435:1977-02
Отменен
Pins with Small Head, Type mg — 3 стр.
DIN 555:1987-10
Отменен
M 5 to M 100 Ч 6 hexagon nuts; product grade C — 4 стр.
DIN 961:1983-12
Отменен
Hexagon bolts with M 8 Ч 1 to M 52 Ч 3 fine threads; product grades A and B — 6 стр.
DIN 547:1986-09
Отменен
Round nuts with drilled holes in one face — 3 стр.
DIN 925:1986-09
Отменен
Slotted countersunk head screws with full dog point — 3 стр.
DIN 966:1984-12
Отменен
Cross recessed raised countersunk (oval) head screws — 4 стр.
DIN 94:1983-09
Отменен
Split pins — 5 стр.
DIN 935-1:1983-12
Отменен
Hexagon slotted castle nuts with metric thread; product grades A and B — 8 стр.
DIN 267-13:1980-03
Отменен
Mechanical Fasteners; Technical Conditions of Delivery; Components for Bolted Connections Made Mainly from Materials Exhibiting a High Impact Strength at Low Temperature or from Materials with a High Temperature Strength — 18 стр.
DIN 558:1983-12
Отменен
M 5 to M 36 hexagon head screws with threading up to the head; product grade C (modified version of ISO 4018) — 5 стр.
DIN 1470:1978-11
Отменен
Grooved Pins, Full Length Parallel-grooved with Pilot — 4 стр.
DIN 1475:1978-11
Отменен
Grooved Pins, Third Length Centre-grooved — 4 стр.
DIN 979:1983-12
Отменен
Hexagon thin castle nuts — 4 стр.
DIN 935-1:1987-10
Отменен
Hexagon slotted nuts and castle nuts with metric coarse and fine pitch thread; product grades A and B — 6 стр.
DIN 546:1986-09
Отменен
Slotted round nuts — 4 стр.
DIN 971-2:1983-12
Отменен
Metric fine thread hexagon nuts; style 2; property classes 10 and 12 — 3 стр.
DIN 1434:1977-02
Отменен
Pins with Small Head, Type m — 3 стр.
DIN 438:1986-09
Отменен
Slotted set screws with cup point (modified version of ISO 7436, 1983 edition) — 4 стр.
DIN 557:1985-02
Отменен
Square nuts; product grade C — 2 стр.
DIN 101:1977-07
Отменен
Rivets; Technical Conditions of Delivery — 10 стр.
DIN 1473:1978-11
Отменен
Grooved Pins, Full Length Parallel-grooved with Chamfer — 4 стр.
DIN 609:1984-07
Отменен
Hexagon fit bolts with long threaded dog point — 8 стр.
DIN 976:1986-09
Отменен
Stud bolts — 5 стр.
DIN 261:1987-01
Отменен
T-head bolts — 6 стр.
DIN 931-1:1982-07
Отменен
Hexagon head bolts with shank; M 1,6 to M 39 screw threads; Product grades A and B, ISO 4014 modified — 8 стр.
DIN 933:1983-12
Отменен
M 1,6 to M 52 hexagon head screws with thread up to the head; product grades A and B (modified version of ISO 4017) — 10 стр.
DIN 971-1:1987-10
Отменен
Style 1 hexagon nuts with metric fine pitch thread; property classes 6 and 8 — 4 стр.
DIN 966:1990-08
Отменен
Cross recessed raised countersunk head screws — 5 стр.
DIN 982:1977-09
Отменен
Hexagon Nuts; Self-locking, Heavy Type — 2 стр.
DIN 908:1983-06
Отменен
Hexagon socket screw plugs with parallel screw thread — 4 стр.
DIN 963:1990-08
Отменен
Slotted countersunk head screws — 6 стр.
DIN 985:1987-05
Отменен
Prevailing torque type hexagon thin nuts with nonmetallic insert — 4 стр.
DIN 85:1988-10
Отменен
Slotted pan head screws; product grade A — 5 стр.
DIN 267-10:1977-03
Отменен
Fasteners; Technical Conditions of Delivery; Hot Dip Galvanized Parts — 3 стр.
DIN 267-5:1984-01
Отменен
Fasteners; technical delivery conditions; acceptance inspection — 9 стр.
DIN 980:1987-05
Отменен
All-metal prevailing torque type hexagon nuts — 4 стр.
DIN 267-20:1984-10
Отменен
Fasteners; technical delivery conditions; surface discontinuities on nuts — 9 стр.
DIN 965:1990-08
Отменен
Cross recessed countersunk flat head screws — 5 стр.
DIN 921:1986-09
Отменен
Slotted pan head screws with large head — 4 стр.
DIN 94:1972-10
Отменен
Split Pins — 5 стр.
DIN 435:1989-12
Отменен
Square taper washers for use with I sections — 2 стр.
DIN 975:1986-09
Отменен
Threaded rods (not intended for new designs) — 3 стр.
DIN 97:1986-12
Отменен
Slotted countersunk (flat) head wood screws — 2 стр.
DIN 1481:1978-11
Отменен
Spring-Type Straight Pins (Roll Pins), Heavy Type — 5 стр.
DIN 562:1985-02
Отменен
Square thin nuts; product grade B — 3 стр.
DIN 924:1986-09
Отменен
Slotted raised countersunk head screws with full dog point — 3 стр.
DIN 315:1983-06
Отменен
Wing nuts — 3 стр.
DIN 971-2:1987-10
Отменен
Style 2 hexagon nuts with metric fine pitch thread; property classes 10 and 12 — 4 стр.
DIN 931-1:1987-09
Отменен
M 1,6 to M 39 hexagon head bolts; product grades A and B — 7 стр.
DIN 417:1986-09
Отменен
Slotted set screws with long dog point (modified version of ISO 7435, edition 1983) — 4 стр.
DIN 267-10:1988-01
Отменен
Fasteners; technical delivery conditions; hot-dip galvanized parts — 5 стр.
DIN 96:1986-12
Отменен
Slotted round head wood screws — 2 стр.
DIN 561:1985-02
Отменен
Hexagon head set screws with small hexagon and full dog point — 4 стр.
DIN 1474:1978-11
Отменен
Grooved Pins, Half Length Reverse-grooved — 4 стр.
DIN 1472:1978-11
Отменен
Grooved Pins, Half Length Taper-grooved — 4 стр.