Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 50103-1:1984-03

Отменен
Testing of metallic materials; Rockwell hardness test; C, A, B, F scales — 7 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 50014:1985-07
Отменен
Climates and their technical application; standard atmospheres — 2 стр.
DIN 50150:2000-10
Отменен
Testing of metallic materials - Conversion of hardness values — 52 стр.
DIN 51200:1985-10
Заменен
Materials testing machines; design and application of test piece holding devices in hardness testing machines — 7 стр.
DIN 51224:1985-01
Отменен
Materials testing machines; hardness testing machines with a depth-measuring device — 6 стр.
ASTM E181-10
Заменен
Standard Test Methods for Detector Calibration and Analysis of Radionuclides — 21 стр.
DIN EN 10109-1:1995-01
Отменен
Metallic materials - Hardness test - Part 1: Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T); German version EN 10109-1:1994 — 12 стр.
DIN 50103-1:1972-12
Отменен
Testing of Metallic Materials; Rockwell Hardness Testing; C, A, B, F Methods — 7 стр.

На этот документ ссылаются

DIN 1996-4:1984-11
Отменен
Testing of asphalt; moulding of specimens from bituminous mixtures — 8 стр.
DIN 1623-1:1983-02
Отменен
Steel flat products; Cold rolled sheet and strip; Technical delivery conditions; Mild unalloyed steels for cold forming — 8 стр.
DIN 1654-1:1980-03
Отменен
Steels for Cold Heading and Cold Extruding; Technical Conditions of Delivery; General — 17 стр.
DIN 267-15:1983-11
Отменен
Fasteners; technical delivery conditions; prevailing torque type nuts — 11 стр.
DIN 267-4:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts (previous classes) — 8 стр.
DIN 267-26:1987-10
Отменен
Fasteners; technical delivery conditions; steel spring washers for bolt/nut assemblies — 10 стр.
DIN 267-23:1983-08
Отменен
Fasteners; technical delivery conditions; property classes for nuts with fine thread (ISO classes) — 9 стр.
DIN 1530-3:1988-10
Отменен
Ejector pins with conical head — 3 стр.
DIN 1530-2:1988-10
Отменен
Shouldered ejector pins with cylindrical head — 3 стр.
DIN 1530-1:1988-10
Отменен
Ejector pins with cylindrical head — 3 стр.
DIN 5401:1978-01
Отменен
Rolling Bearing Components; Balls — 3 стр.
DIN 5401-1:1993-11
Отменен
Rolling bearings - Balls of through-hardening rolling bearing steel — 9 стр.
DIN 6773-2:1977-05
Отменен
Heat-Treatment of Ferrous Metals - Heat-treated Parts - Representation and Indications in Drawings; Hardening, Hardening and Tempering, Quenching and Tempering — 4 стр.
DIN 7255:1984-11
Отменен
Engineers' cold chisels and allied tools; technical specifications — 2 стр.
DIN 6773-4:1977-05
Отменен
Heat Treatment of Ferrous Metals - Heat-treated Parts - Representation and Indications in Drawings; Case hardening — 7 стр.
DIN 7946:1984-01
Отменен
Mountaineering equipment; climbing ropes, terms, safety requirements, testing — 8 стр.
DIN 16757:1989-05
Отменен
Compression and injection moulds; sprue puller — 2 стр.
DIN 16752-1:1989-05
Отменен
Compression- and injection moulds; sprue bushes — 3 стр.
DIN 11250:1986-01
Отменен
Agricultural machinery and tractors; blades for rotary mowers — 2 стр.
DIN 11100:1991-01
Отменен
Agricultural machinery; tools for working the soil; requirements and test — 3 стр.
DIN 11250:1990-11
Отменен
Agricultural machines and tractors - Flat blades for drum mowers - Type A; ISO 5718-1:1989 modified — 4 стр.
DIN 8555-2:1978-01
Отменен
Filler Metals Used in Surfacing; Hardness Testing of the Weld Metal — 2 стр.
DIN 30911-4:1990-10
Отменен
Sintered metal materials; sint-testing procedures; part 4: determination of apparent hardness — 2 стр.
DIN 73126-3:1979-08
Отменен
Gudgeon pins for reciprocating piston engines; concepts, test of quality characteristics — 5 стр.
DIN 73126:1987-03
Действует
Gudgeon pins for reciprocating piston engines; dimensions, types finish, requirements, tests — 14 стр.
DIN 65038-1:1980-11
Отменен
Aerospace; bars of steel, nickel alloys and cobalt alloys for aircraft, technical specification — 5 стр.
DIN 65236:1988-12
Действует
Aerospace; steel, nickel- and cobalt-alloy wire; technical specification — 23 стр.
DIN 65034:1987-11
Отменен
Aerospace; castings of steel, nickel- and cobalt alloys; technical specification — 23 стр.
DIN 65034:1992-06
Действует
Aerospace; castings of steel, nickel- and cobalt alloys; technical specification; inactive for new design — 23 стр.
DIN 65113:1982-07
Отменен
Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification — 7 стр.
DIN 65227:1992-11
Действует
Aerospace; workshop facilities; guide bushes for hand milling machines, clearance 2,5 mm — 2 стр.
DIN 65038-1:1989-08
Действует
Aerospace; steel, nickel- and cobalt-alloy bars; technical specification — 25 стр.
DIN 65035:1989-10
Отменен
Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specifications — 24 стр.
DIN 65033:1989-08
Отменен
Aerospace; aluminium- and magnesium-alloy forgings; technical specification — 16 стр.
DIN EN 657:1994-06
Отменен
Thermal spraying; terminology, classification; German version EN 657:1994 — 9 стр.
DIN EN 586-2:1994-11
Действует
Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements; German version EN 586-2:1994 — 8 стр.
DIN 68874-1:1985-01
Действует
Shelves and shelf bearers in cabinet furniture; requirements and testing when mounted in the cabinet — 3 стр.
DIN 70909:1987-02
Отменен
Piston rings for automotive engineering; survey, general — 10 стр.
DIN ISO 898-1:1979-04
Отменен
Mechanical Properties of Fasteners; Part 1: Bolts, Screws and Studs — 16 стр.
DIN ISO 7331:1990-11
Отменен
Ski-poles for alpine skiing; safety requirements and test methods; identical with ISO 7331:1990 — 12 стр.
DIN ISO 5182:1995-03
Отменен
Welding - Materials for resistance welding electrodes and ancillary equipment; identical with ISO 5182:1991 — 9 стр.
DIN ISO 5182:1984-04
Отменен
Materials for resistance welding electrodes and ancillary equipment — 8 стр.
DIN ISO 898-6:1990-03
Отменен
Mechanical properties of fasteners; nuts with specified proof load values; fine pitch thread; identical with ISO 898-6:1988 (status as of 1989) — 9 стр.
DIN ISO 3738-1:1991-07
Отменен
Hardmetals; Rockwell hardness test (scale A); test method; identical with ISO 3738-1:1982 — 4 стр.
DIN EN 10109-1:1995-01
Отменен
Metallic materials - Hardness test - Part 1: Rockwell test (scales A, B, C, D, E, F, G, H, K) and Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T); German version EN 10109-1:1994 — 12 стр.
DIN 49648-2:1992-10
Отменен
Guidelines and general information; tolerances for gauges in IEC 61 — 4 стр.
DIN 50150:1976-12
Отменен
Testing of Steel and Cast Steel; Conversion Table for Vickers Hardness, Brinell Hardness, Rockwell Hardness and Tensile Strength — 5 стр.
DIN 52295:1983-09
Отменен
Testing of glass; pendulum impact test on containers; inspection by attributes and by variables — 4 стр.
DIN 50103-3:1985-02
Отменен
Testing of metallic materials; Rockwell hardness test; modified Rockwell scales Bm, Fm and 30 Tm for thin sheet steel — 7 стр.
DIN 50191:1987-09
Отменен
Hardenability testing of steel by end quenching — 7 стр.
DIN 51224:1985-01
Отменен
Materials testing machines; hardness testing machines with a depth-measuring device — 6 стр.
DIN 50103-2:1973-10
Отменен
Testing of Metallic Materials; Rockwell Hardness Testing; N and T Methods — 7 стр.
DIN 52115-1:1988-08
Отменен
Determination of impact resistance of mineral aggregates; impact testing machine — 10 стр.
DIN 50103-1:1972-12
Отменен
Testing of Metallic Materials; Rockwell Hardness Testing; C, A, B, F Methods — 7 стр.
DIN 51304:1983-09
Отменен
Material testing machines; verification of hardness testing machines fitted with indentation depth measuring device — 5 стр.
DIN 51224:1976-10
Отменен
Material Testing Machines; Hardness Testing Machines with a Depth Measuring Device — 7 стр.
DIN 52295:1993-04
Отменен
Testing of glass; pendulum impact test on containers; testing by attributes and by variables — 5 стр.
DIN 51917:1987-10
Отменен
Testing of carbon materials; Rockwell hardness test; ball indentation method; solid materials — 4 стр.
DIN 2093:1992-01
Отменен
Disc springs; dimensions and quality specifications — 11 стр.
DIN 2093:1990-09
Отменен
Disc springs; dimensions and quality specifications — 11 стр.
DIN 17204:1990-11
Отменен
Seamless circular tubes made from steels for quenching and tempering; technical delivery conditions — 20 стр.
DIN 17350:1980-10
Отменен
Tool Steels; Technical Conditions of Delivery — 27 стр.
DIN 17103:1989-10
Отменен
Weldable fine grain structural steel forgings; technical delivery conditions — 16 стр.
DIN 17243:1987-01
Отменен
Weldable heat resisting steel forgings and rolled or forged steel bars; technical delivery conditions — 18 стр.
DIN 17022-2:1986-06
Действует
Heat treatment of ferrous materials; heat treatment methods; hardening and tempering of tools — 19 стр.
DIN 17480:1984-09
Отменен
Valve materials; technical delivery conditions — 12 стр.
DIN 17210:1986-09
Отменен
Case hardening steels; technical delivery conditions — 20 стр.
DIN 17022-1:1994-10
Действует
Heat treatment of ferrous materials - Methods of heat treatment - Part 1: Hardening, austempering, annealing, quenching, tempering of components — 17 стр.
DIN 17022-3:1989-04
Действует
Heat treatment of ferrous materials; heat treatment methods; case hardening — 23 стр.
DIN 17115:1987-02
Отменен
Steels for welded round link chains; technical delivery conditions — 16 стр.
DIN 17200:1987-03
Отменен
Steels for quenching and tempering; technical delivery conditions — 40 стр.
DIN 17221:1988-12
Отменен
Hot rolled steels for springs suitable for quenching and tempering - Technical delivery conditions — 12 стр.
DIN 17200:1984-11
Отменен
Steels for quenching and tempering; technical delivery conditions — 40 стр.
DIN 20370:1980-03
Отменен
Rock drilling; percussive drill rod with shank for suction head — 3 стр.
DIN 22256:1991-08
Отменен
Sprocket rings and sprocket assemblies for chain conveyors and coal ploughs; dimensions, requirements, testing — 7 стр.
DIN 32525-4:1985-03
Отменен
Testing of filler metals by means of weld metal specimens; test piece for determining the hardness for surfacing — 3 стр.
DIN 32927:1986-12
Отменен
Winter sports equipment; outfit for ice hockey skating; safety requirements and testing — 6 стр.
DIN 32926:1983-09
Отменен
Winter sports equipment; outfit for figure skating; concepts, safety requirements and testing — 5 стр.
DIN 32926:1985-11
Отменен
Winter sports equipment; outfit for figure skating; concepts, safety requirements and testing — 4 стр.
DIN 58298-12:1994-04
Отменен
Materials, finish and testing of medical instruments; hand saws — 5 стр.
DIN 51200:1985-10
Заменен
Materials testing machines; design and application of test piece holding devices in hardness testing machines — 7 стр.
DIN 65144:1986-04
Отменен
Aerospace; thermally sprayed components; technical specification — 5 стр.
DIN ISO 6621-3:1990-06
Отменен
Internal combustion engines; piston rings; material specifications; identical with ISO 6621-3:1983 — 4 стр.
DIN 29657:1991-01
Действует
Aerospace; seamless structural tubes in steel and nickel alloys; technical specification — 23 стр.
DIN 65035:1993-11
Отменен
Aerospace; steel, nickel- and cobalt-alloy stock, forgings and rings,; technical specification — 24 стр.
DIN 65113:1990-10
Отменен
Aerospace; bars and extruded profiles of aluminium and wrought aluminium alloys; technical specification; inactive for new design — 8 стр.
DIN 65033:1990-08
Отменен
Aerospace; aluminium- and magnesium-alloy forgings; technical specification — 16 стр.