Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General (ISO 22391-1:2009); German version EN ISO 22391-1:2009— 17 стр.
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012— 22 стр.
Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008); German version EN ISO 21003-1:2008— 18 стр.
Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009); German version EN ISO 25762:2012— 37 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation and specification (ISO 12086-1:1995); German version EN ISO 12086-1:1999— 22 стр.
Plastics - Polyamides - Determination of <epsilon>-caprolactam and <omega>-laurolactam by gas chromatography (ISO 11337:2004); German version EN ISO 11337:2004— 20 стр.
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:1997); German version EN ISO 13000-1:1997— 8 стр.
Plastics - Phenolic resins - Determination of heats and temperatures of reaction by differential scanning calorimetry (ISO 11409:1993); German version EN ISO 11409:1998— 8 стр.
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of resin, reinforced-fibre and mineral-filler content - Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999— 9 стр.
Plastics - Polyamides - Determination of <epsilon>-caprolactam and <omega>-laurolactam by gas chromatography (ISO 11337:2010); German version EN ISO 11337:2010— 22 стр.
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of cure characteristics (ISO 12114:1997); German version EN ISO 12114:1997— 12 стр.
Fibre-reinforced plastics - Thermosetting moulding compounds and prepregs - Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997— 11 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2005); German version EN ISO 11357-4:2013— 15 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (ISO 11357-6:2008); German version EN ISO 11357-6:2013— 20 стр.
Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2002); German version EN ISO 11357-7:2013— 16 стр.
Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:1995); German version EN ISO 12086-2:1999— 36 стр.
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999); German version EN ISO 14526-1:1999— 7 стр.
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999); German version EN ISO 14526-2:1999— 12 стр.
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14528-3:1999); German version EN ISO 14528-3:1999— 7 стр.
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003); German version EN ISO 15874-1:2003— 16 стр.
Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999); German version EN ISO 15252-2:1999— 12 стр.
Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 15252-3:1999); German version EN ISO 15252-3:1999— 7 стр.
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14529-3:1999); German version EN ISO 14529-3:1999— 7 стр.
Plastics piping systems for industrial applications - Polybutylene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system; Metric series (ISO 15494:2003); German version EN ISO 15494:2003— 89 стр.
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003); German version EN ISO 15877-1:2003— 16 стр.
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999); German version EN ISO 14529-2:1999— 12 стр.
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14528-1:1999); German version EN ISO 14528-1:1999— 7 стр.
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003); German version EN ISO 15875-1:2003— 17 стр.
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009); German version EN ISO 15877-1:2009— 21 стр.
Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) - Specifications for components and the system; Metric series (ISO 15493:2003); German version EN ISO 15493:2003— 72 стр.
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14527-1:1999); German version EN ISO 14527-1:1999— 7 стр.
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999); German version EN ISO 14527-2:1999— 12 стр.
Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999); German version EN ISO 14528-2:1999— 12 стр.
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003); German version EN ISO 15876-1:2003— 17 стр.
Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14527-3:1999); German version EN ISO 14527-3:1999— 6 стр.
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999— 12 стр.
Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14529-1:1999); German version EN ISO 14529-1:1999— 7 стр.
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + AMD 1:2010); German version EN ISO 15877-1:2009 + A1:2010— 23 стр.
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 1: Designation system and basis for specifications (ISO 14530-1:1999); German version EN ISO 14530-1:1999— 7 стр.
Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14530-3:1999); German version EN ISO 14530-3:1999— 6 стр.
Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 1: Designation system and basis for specifications (ISO 15252-1:1999); German version EN ISO 15252-1:1999— 6 стр.
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000— 11 стр.
Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007); Trilingual version EN ISO 8062-1:2007— 37 стр.
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001— 18 стр.
Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005— 32 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system (includes amendment A1:2002); German version EN 1852-1:1997 + A1:2002— 35 стр.
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specification for pipes, fittings and the system; German version EN 1455-1:1999— 26 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system; German version EN 1852-1:1997— 19 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specification for pipes, fittings and the system; German version EN 1401-1:1998— 26 стр.
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system; German version EN 1566-1:1998— 27 стр.
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 2: Dimensios of injection-moulded tees for socket welding— 10 стр.
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 3: Dimensions of injection-moulded sockets and caps for socket welding— 6 стр.
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 7: Dimensions of bushings, flanges and selaing elements for socket welding— 13 стр.
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 4: Dimensions of injection-moulded reducers for socket welding— 8 стр.
Pipe fittings and joint assemblies for polybutene pressure pipes - Type PB 125 - Part 1: Dimensions of injection-moulded elbows for socket welding— 8 стр.
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003); German version EN ISO 899-2:2003— 20 стр.
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content; calcination methods (ISO 1172:1996); German version EN ISO 1172:1998— 7 стр.
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011— 24 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012); German version EN ISO 1874-2:2012— 18 стр.
Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009)— 20 стр.
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997— 4 стр.
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:1993); German version EN ISO 899-2:1996— 10 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004); German version EN ISO 1183-1:2004— 14 стр.
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012); German version EN ISO 1183-1:2012— 15 стр.
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001); German version EN ISO 1043-1:2002— 20 стр.
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene with mineral modifiers (PP-MD) - Part 1: Specifications for pipes, fittings and the system; German version EN 14758-1:2005— 37 стр.
