Стандарты DIN

DIN 4000-89:1998-04

Отменен

Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.

Описание Изменения Ссылки Версии

Ссылочные документы

DIN 4000-1:1992-09

Отменен

Object parameter list; concepts and principles — 16 стр.

DIN 4000-95:1998-04

Отменен

Tabular layout of article characteristics - Part 95: Tool interface coding — 6 стр.

DIN 4000-97:1998-04

Отменен

Tabular layout of article characteristics - Part 97: Tool holders with n numbers of edge fixture of tools — 2 стр.

DIN 6327-1:1985-06

Действует

Adjustable adaptors for tools with morse taper shanks, short types — 4 стр.

DIN 6327-2:1985-06

Действует

Adjustable adaptors for tools with morse taper shanks, long types — 4 стр.

DIN 6327-3:1985-06

Действует

Adjustable adaptors for tools with morse taper shanks, stepped types — 4 стр.

DIN 6354:1980-04

Действует

Milling machine arbors with steep taper, complete — 2 стр.

DIN 6355:1980-01

Действует

Clamping Devices; Milling Machine Arbors with Taper — 3 стр.

DIN 6357:1988-07

Действует

Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment — 3 стр.

DIN 6358:1988-07

Действует

Milling machine arbors with taper shank 7/24 for milling cutter with longitudinal or transverse drive — 4 стр.

DIN 4000-45:1998-04

Отменен

Tabular layout of article characteristics - Part 45: Adaptors and holders for tools — 12 стр.

DIN 6359-1:1996-12

Действует

Reduction sleeves with 7/24 taper shank for parallel shanks with lateral driving surface and inclined clamping surface - Part 1: Type A with 7/24 taper shank in accordance with DIN 2080-1 — 4 стр.

DIN 6360:1983-05

Действует

Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive — 3 стр.

DIN 6364:1994-01

Отменен

Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread — 4 стр.

DIN 6383:1979-04

Отменен

Reduction sleeves with sleep taper, for morse taper shank with flat tang

DIN 69882-2:1997-10

Отменен

Tool holder with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive; dimensions — 4 стр.

DIN 69882-3:1997-10

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive; dimensions — 3 стр.

DIN 69882-4:1997-10

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for paralled shanks with lateral driving surface; dimensions — 4 стр.

DIN 69882-5:1999-01

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D; Holders for parallel shanks with inclined clamping surface; Dimensions — 6 стр.

DIN 69882-6:2000-07

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E; clamping chuck for collets with 8° setting angle; dimensions — 4 стр.

DIN 4000-72:1998-04

Отменен

Tabular layout of article characteristics - Part 72: Adaptors with cylindrical fixtures for tools — 3 стр.

DIN 4000-73:1998-04

Отменен

Tabular layout of article characteristics - Part 73: Adaptors with tapered fixtures for tools — 3 стр.

DIN 4000-90:1998-04

Отменен

Tabular layout of article characteristics - Part 90: Tools holders with indexable insert edges — 8 стр.

DIN 4000-91:1998-04

Отменен

Tabular layout of article characteristics - Part 91: Intermediates — 3 стр.

DIN 4000-92:1998-04

Отменен

Tabular layout of article characteristics - Part 92: Non-rotating tool adaptors — 6 стр.

DIN 4000-93:1998-04

Отменен

Tabular layout of article characteristics - Part 93: Collets — 4 стр.

DIN 4000-94:1998-04

Отменен

Tabular layout of article characteristics - Part 94: Quick change inserts — 3 стр.

DIN 4000-89:2012-03

Действует

Tabular layouts of properties - Part 89: Adaptive items for tools and extenders — 71 стр.

DIN 4000-45:1986-01

Отменен

Tabular layouts of article characteristics for tool holders — 19 стр.

На этот документ ссылаются

DIN 69882-8:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Type G, shrink chuck - Dimensions — 10 стр.

DIN 69882-6:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions — 7 стр.

DIN 69882-2:1997-10

Отменен

Tool holder with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive; dimensions — 4 стр.

DIN 69882-5:1999-01

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D; Holders for parallel shanks with inclined clamping surface; Dimensions — 6 стр.

DIN 69882-7:2002-04

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck; Dimensions — 11 стр.

DIN 69882-7:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck - Dimensions — 12 стр.

DIN 69882-3:2005-06

Действует

DIN 69882-6:2000-07

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E; clamping chuck for collets with 8° setting angle; dimensions — 4 стр.

DIN 69882-2:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions — 7 стр.

DIN 69882-3:1997-10

Отменен

DIN 69882-4:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions — 7 стр.

DIN 69882-4:1997-10

Отменен

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for paralled shanks with lateral driving surface; dimensions — 4 стр.

DIN 69882-5:2005-06

Действует

Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions — 8 стр.

DIN 4000-78:2006-08

Отменен

Tabular layouts of properties - Part 78: Tips, brazed — 9 стр.

DIN 4000-86:2006-08

Отменен

Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts — 19 стр.

DIN 4000-93:1998-04

Отменен

Tabular layout of article characteristics - Part 93: Collets — 4 стр.

DIN 4000-89:2012-03

Действует

Tabular layouts of properties - Part 89: Adaptive items for tools and extenders — 71 стр.

DIN 4000-76:2009-11

Отменен

Tabular layouts of properties - Part 76: Inserts, indexable — 20 стр.

DIN 4000-130:2003-10

Отменен

Tabular layout of article characteristics - Part 130: Abrasive pencils and abrasive wheels with thread inserts — 14 стр.

DIN 4000-128:2003-10

Отменен

Tabular layout of article characteristics - Part 128: Bonded abrasive products with bore or threaded insert — 20 стр.

DIN 4000-131:2003-10

Отменен

Tabular layout of article characteristics - Part 131: Abrasive products on base — 16 стр.

DIN 4000-95:1998-04

Отменен

Tabular layout of article characteristics - Part 95: Tool interface coding — 6 стр.

DIN 4000-126:2006-08

Отменен

Tabular layouts of properties - Part 126: Reamers with non-indexable cutting edges — 17 стр.

DIN 4000-129:2003-10

Отменен

Tabular layout of article characteristics - Part 129: Bonded abrasive segments, honing tools, abrasive bars and grindstones — 11 стр.

DIN 4000-81:2009-07

Отменен

Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges — 28 стр.

DIN 4000-92:1998-04

Отменен

Tabular layout of article characteristics - Part 92: Non-rotating tool adaptors — 6 стр.

DIN 4000-73:1998-04

Отменен

Tabular layout of article characteristics - Part 73: Adaptors with tapered fixtures for tools — 3 стр.

DIN 4000-81:2004-04

Отменен

Tabular layout of product properties - Part 81: Drills and counter sinking tools with non indexable cutting edges — 20 стр.

DIN 4000-76:2004-03

Отменен

Tabular layout of product properties - Part 76: Inserts, indexable — 16 стр.

DIN 4000-76:2006-08

Отменен

Tabular layouts of properties - Part 76: Inserts, indexable — 15 стр.

DIN 4000-72:1998-04

Отменен

Tabular layout of article characteristics - Part 72: Adaptors with cylindrical fixtures for tools — 3 стр.

DIN 4000-90:1998-04

Отменен

Tabular layout of article characteristics - Part 90: Tools holders with indexable insert edges — 8 стр.

DIN 4000-94:1998-04

Отменен

Tabular layout of article characteristics - Part 94: Quick change inserts — 3 стр.

DIN 4000-91:1998-04

Отменен

Tabular layout of article characteristics - Part 91: Intermediates — 3 стр.

DIN 4000-127:2011-04

Действует

Tabular layouts of properties - Part 127: Reamers for replaceable inserts — 23 стр.

DIN 4000-45:1998-04

Отменен

Tabular layout of article characteristics - Part 45: Adaptors and holders for tools — 12 стр.

DIN 4000-143:2005-05

Отменен

Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank — 19 стр.

DIN 4000-45:1986-01

Отменен

Tabular layouts of article characteristics for tool holders — 19 стр.

DIN 4000-77:2004-03

Отменен

Tabular layout of product properties - Part 77: Inserts, clamped for thread cutting — 19 стр.

DIN 4000-97:1998-04

Отменен

Tabular layout of article characteristics - Part 97: Tool holders with n numbers of edge fixture of tools — 2 стр.

DIN 4000-81:2006-08

Отменен

Tabular layouts of properties - Part 81: Drills and counter sinking tools with non-indexable cutting edges — 22 стр.

DIN 4000-141:2011-02

Отменен

Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 39 стр.

DIN SPEC 4002-8:2010-11

Отменен

Properties and their scopes for product data exchange - Part 8: Rules for designing application classes — 18 стр.