Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 4000-141:2011-02

Отменен
Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 39 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 138:2003-04
Действует
Metal-cutting tools - Bores, keyways and driving features for tools with parallel bore and 1 in 30 taper bore — 12 стр.
DIN 228-1:1987-05
Действует
Morse tapers and metric tapers; taper shanks — 6 стр.
DIN 2080-1:1978-12
Отменен
7/24 Taper Shanks for Tools and Clamping Devices, Type A — 3 стр.
DIN 2080-2:1979-09
Отменен
7/24 shanks for tools and clamping devices, form B — 2 стр.
DIN 3960:1987-03
Отменен
Definitions, parameters and equations for involute cylindrical gears and gear pairs — 59 стр.
DIN 3962-1:1978-08
Отменен
Tolerances for Cylindrical Gear Teeth; Tolerances for Deviations of Individual Parameters — 18 стр.
DIN 3962-2:1978-08
Отменен
Tolerances for Cylindrical Gear Teeth; Tolerances for Tooth Trace Deviations — 2 стр.
DIN 3962-3:1978-08
Отменен
Tolerances for Cylindrical Gear Teeth; Tolerances for Pitch-span Deviations — 2 стр.
DIN 3968:1960-09
Действует
Tolerances for Single-start Hobs for Involute Spur Gears — 5 стр.
DIN 3999:1974-11
Действует
Gear notation; symbols — 22 стр.
DIN 4000-1:1992-09
Отменен
Object parameter list; concepts and principles — 16 стр.
DIN 4000-76:2009-11
Отменен
Tabular layouts of properties - Part 76: Inserts, indexable — 20 стр.
DIN 4000-77:2006-08
Отменен
Tabular layouts of properties - Part 77: Inserts, clamped, for thread cutting — 19 стр.
DIN 4000-78:2006-08
Отменен
Tabular layouts of properties - Part 78: Tips, brazed — 9 стр.
DIN 4000-80:2005-01
Отменен
Tabular layouts of properties - Part 80: Screwing tabs, cold forming taps and screwing dies — 14 стр.
DIN 4000-81:2010-01
Отменен
Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges — 28 стр.
DIN 4000-82:2005-07
Отменен
Tabular layouts of properties - Part 82: End mills with non-indexable cutting edges — 24 стр.
DIN 4000-86:2006-08
Отменен
Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts — 19 стр.
DIN 4000-87:2005-01
Отменен
Tabular layouts of properties - Part 87: End mills with indexable inserts — 18 стр.
DIN 4000-88:2005-01
Отменен
Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts — 15 стр.
DIN 4000-89:1998-04
Отменен
Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.
DIN 4000-90:2007-11
Отменен
Tabular layouts of properties - Part 90: Tool holders for indexable inserts — 24 стр.
DIN 4000-93:2006-08
Отменен
Tabular layouts of properties - Part 93: Collets, Clamping sleeves, Ferrules — 12 стр.
DIN 4000-94:2007-11
Отменен
Tabular layouts of properties - Part 94: Quick change adaptors — 12 стр.
DIN 4000-95:2007-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 37 стр.
DIN 4000-126:2006-08
Отменен
Tabular layouts of properties - Part 126: Reamers with non-indexable cutting edges — 17 стр.
DIN 4000-127:2006-08
Отменен
Tabular layouts of properties - Part 127: Reamers for indexable cutting edges — 17 стр.
DIN 4000-140:2011-02
Действует
Tabular layouts of properties - Part 140: Toothing system data of work pieces — 26 стр.
DIN 4000-142:2011-02
Действует
Tabular layout of properties - Part 142: Shaving cutters for external and internal toothing — 23 стр.
DIN 4000-143:2011-02
Отменен
Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank — 22 стр.
DIN 8002:1955-01
Действует
Metal-cutting Tools; Hobs for Spur Gears, with Clutch Drive Slot or Keyway, Modules 1 to 20 — 2 стр.
DIN 69871-1:1995-10
Отменен
Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media — 5 стр.
DIN EN ISO 286-1:2010-11
Отменен
Geometrical product specification (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010) — 49 стр.
DIN EN ISO 286-2:2010-11
Отменен
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) — 59 стр.
DIN ISO 513:2005-11
Отменен
Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application (ISO 513:2004) — 6 стр.
BS 122-6:1995
Заменен
Milling cutters, Specification for dimensions for interchangeability of cutter arbors and cutter mandrels — 10 стр.
BS 2062-1:1959
Действует
Specification for gear hobs, Hobs for general purposes, 1 d.p. to 20 d.p. inclusive — 20 стр.
BS 2062-2:1960
Действует
Specification for gear hobs, Hobs for gears for turbine reduction and similar drives — 16 стр.
DIN EN ISO 24014-1:2016-04
Отменен
Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2015); English version EN ISO 24014-1:2015 — 72 стр.
ISO 2490:2007
Действует
Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module -- Nominal dimensions — 16 стр.
ISO 4468:2009/Cor.1:2009
Действует
Gear hobs -- Accuracy requirements -- Technical Corrigendum 1 — 1 стр.
ISO 13399-1:2006/Cor.1:2008
Действует
Cutting tool data representation and exchange -- Part 1: Overview, fundamental principles and general information model -- Technical Corrigendum 1 — 3 стр.
ISO/TS 13399-201:2014
Действует
Cutting tool data representation and exchange -- Part 201: Creation and exchange of 3D models -- Regular inserts — 40 стр.
ISO/TS 13399-301:2013
Действует
Cutting tool data representation and exchange -- Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies — 34 стр.
ISO/TS 13399-405:2016
Действует
Cutting tool data representation and exchange -- Part 405: Creation and exchange of 3D models -- Collets — 40 стр.
ISO/TS 13399-5:2014
Действует
Cutting tool data representation and exchange -- Part 5: Reference dictionary for assembly items — 60 стр.
ISO/TS 13399-50:2007/Cor.1:2011
Действует
Cutting tool data representation and exchange -- Part 50: Reference dictionary for reference systems and common concepts -- Technical Corrigendum 1 — 2 стр.
ISO/TS 13399-60:2014
Действует
Cutting tool data representation and exchange -- Part 60: Reference dictionary for connection systems — 148 стр.
ISO/TS 13399-100:2008/Cor.1:2011
Действует
Cutting tool data representation and exchange -- Part 100: Definitions, principles and methods for reference dictionaries -- Technical Corrigendum 1 — 2 стр.
DD ISO/TS 13399-150:2008
Действует
Cutting tool data representation and exchange. Usage guidelines — 98 стр.
DIN 4000-141:2016-10
Действует
Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 40 стр.
DIN 4000-141:2005-04
Отменен
Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 28 стр.

На этот документ ссылаются

DIN 4000-142:2011-02
Действует
Tabular layout of properties - Part 142: Shaving cutters for external and internal toothing — 23 стр.
DIN 4000-137:2011-09
Действует
Tabular layouts of properties - Part 137: Tools with geometrically undefined cutting edges for machining of gears — 28 стр.
DIN 4000-144:2011-09
Действует
Tabular layouts of properties - Part 144: Master gears and truing gears for involute teeth — 19 стр.
DIN 4000-141:2005-04
Отменен
Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 28 стр.
DIN 4000-143:2011-02
Отменен
Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank — 22 стр.
DIN 4000-143:2016-09
Действует
Tabular layouts of properties - Part 143: Pinion type cutters with bore or shank — 28 стр.
DIN 4000-95:2013-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 74 стр.
DIN 4000-141:2016-10
Действует
Tabular layouts of properties - Part 141: Hobs with bore or shank for cylindrical gears — 40 стр.
DIN 4000-140:2011-02
Действует
Tabular layouts of properties - Part 140: Toothing system data of work pieces — 26 стр.
DIN SPEC 69874-2:2014-11
Отменен
Graphical data layout - Creation of documents for the standardized data exchange - Part 2: Layer settings for tool design — 54 стр.
DIN SPEC 69874-1:2014-11
Отменен
Graphical data layout - Creation of documents for the standardized data exchange - Part 1: Graphical product information — 12 стр.
DIN SPEC 69874-3:2014-11
Отменен
Graphical data layout - Creation of documents for the standardized data exchange - Part 3: Definition of properties for drawing headers and their XML-data exchange — 32 стр.
DIN 4000-1:2012-09
Отменен
Tabular layouts of properties - Part 1: Concepts and principles — 40 стр.