Каталог стандартов
+7 (495) 223-46-76
+7 (812) 309-78-59
inform@normdocs.ru
О компании
Стандарты
Контакты
Заказать стандарт
Стандарты
DIN
DIN 7184-1:1972-05
Отменен
Tolerances of Form and Position; Definitions, Indications on Drawings
— 19 стр.
Описание
Изменения
Ссылки
Версии
Ссылочные документы
DIN 7168-1:1981-05
Отменен
General Tolerances; Linear and Angular Dimensions
— 4 стр.
DIN 7182-1:1986-05
Отменен
Sizes, deviations, tolerances and fits; basic concepts
— 16 стр.
DIN 7167:1987-01
Отменен
Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing
— 2 стр.
DIN ISO 1101:1985-03
Отменен
Technical drawings, geometrical tolerancing, tolerances of form, orientation, location and runout; generalities, definitions, symbols on drawings
— 26 стр.
На этот документ ссылаются
DIN 740-1:1986-08
Действует
Power transmission engineering; flexible shaft couplings; technical delivery conditions
— 15 стр.
DIN 1680-1:1980-10
Отменен
Rough castings; general tolerances and machining allowances; general
— 7 стр.
DIN 7167:1987-01
Отменен
Relationship between tolerances of size, form, and parallelism; envelope requirement without individual indication on the drawing
— 2 стр.
DIN 5425-1:1984-11
Отменен
Rolling bearings; mounting tolerances; general guidelines
— 5 стр.
DIN 5145:1973-03
Отменен
Plane irons for wood smooth and for planes
— 2 стр.
DIN 5544-1:1985-02
Отменен
Parabolic springs for railway vehicles major dimensions, design, requirements, testing
— 14 стр.
DIN 5149:1973-03
Отменен
Plane irons with parallel section for reform planes
— 2 стр.
DIN 6790-1:1980-12
Отменен
Specification by terms in technical drawings; terms
— 14 стр.
DIN 7868-3:1986-06
Действует
Rubber and plastics covered rollers; dimensional and geometrical tolerances
— 10 стр.
DIN 16903-2:1974-12
Отменен
Closed Insert Nuts with Disc for Plastics Mouldings
— 3 стр.
DIN 16901:1982-11
Отменен
Plastics mouldings; Tolerances and acceptance conditions for linear dimensions
— 8 стр.
DIN 15085:1977-12
Действует
Lifting appliances; rail wheels, technical conditions
— 5 стр.
DIN 12847-1:1984-05
Действует
Laboratory glassware; haemacytometer counting chambers; general requirements
— 2 стр.
DIN 8620-4:1980-07
Отменен
Machine Tools - Boring and Milling Machines with Horizontal Spindle; Floor-Type Machines - Acceptance Conditions
— 18 стр.
DIN 8620-6:1983-07
Отменен
Machine tools; boring and milling machines with horizontal spindle; planer type machines with movable column; acceptance conditions
— 22 стр.
DIN 8609-2:1979-03
Отменен
Machine tools; vertical turning and boring lathes with one column, acceptance conditions
— 7 стр.
DIN 8609-4:1980-04
Отменен
Machine tools; vertical turning and boring lathes with one column and movable base and/or movable column, acceptance
— 7 стр.
DIN 8609-3:1979-03
Отменен
Machine tools; vertical turning and boring lathes with two columns, acceptance conditions
— 8 стр.
DIN 68101:1984-12
Отменен
Fundamental deviations and tolerance zones for wood working and wood processing
— 2 стр.
DIN 68100:1984-12
Отменен
Tolerance system for wood working and wood processing; concepts, series of tolerances, shrinkage and swelling
— 9 стр.
DIN 64420-6:1976-04
Отменен
Cones, half angle of the cone 9° 15<Minute>; cones, gauges
— 2 стр.
DIN ISO 45:1983-05
Отменен
Aircraft; pressure refuelling connections
— 6 стр.
DIN ISO 5679:1982-05
Отменен
Equipment for working the soil; disks; classification, main fixing dimensions and specifications
— 4 стр.
DIN ISO 1101:1985-03
Отменен
Technical drawings, geometrical tolerancing, tolerances of form, orientation, location and runout; generalities, definitions, symbols on drawings
— 26 стр.
DIN 43620-4:1981-09
Отменен
Low-voltage high-rupturing-capacity fuses with blade contacts 500 and 660 V a.c. and 440 d.c.; replacement handle for the sizes 00 up to 3; dimensions of the engaging part
— 3 стр.
DIN 42537-2:1983-05
Действует
Transformers; outdoor bushings U<(Index)m> 36 kV, for 12,5 to 25 kA; components
— 5 стр.
DIN 46011:1985-04
Действует
Earthing terminals for substations with rated voltages of 52 kV and higher; principal dimensions, coordination
— 4 стр.
DIN 3966-2:1978-08
Действует
Information on Gear Teeth in Drawings; Information on Straight Bevel Gear Teeth
— 6 стр.
DIN 3966-1:1978-08
Действует
Information on Gear Teeth in Drawings; Information on Involute Teeth for Cylindrical Gears
— 8 стр.
DIN 4510-1:1983-06
Действует
Picture sizes and printing masks for film No. 110, film No. 126 and film No. 135 for still photography
— 2 стр.
DIN 28006-1:1986-07
Отменен
General tolerances for agitator vessels; agitator vessels for general use
— 6 стр.
DIN 28008:1983-08
Отменен
Tolerances for construction of tubular heat exchangers
— 15 стр.
DIN 40680-2:1983-08
Действует
Ceramic components for electrical purposes; form tolerances
— 7 стр.
DIN 8615-4:1979-11
Отменен
Machine Tools; Milling Machines with Vertical Spindle and Fixed Table; Acceptance Conditions
— 8 стр.
DIN 8615-3:1979-11
Отменен
Machine Tools; Milling Machines with Horizontal Spindle and Fixed Table; Acceptance Conditions
— 10 стр.
DIN 3761-12:1984-01
Отменен
Rotary shaft lip type seals for automobils; test; determination of indentation hardness of elastomers; micro hardness test
— 4 стр.
DIN 3761-2:1983-11
Отменен
Rotary shaft lip type seals for automobils; applications
— 9 стр.
DIN 3761-11:1984-01
Отменен
Rotary shaft lip type seals for automobils; test; evaluation of leakage
— 4 стр.
DIN 3966-3:1980-11
Отменен
Worms and worm wheels; information to be given to the manufacturer by the purchaser in order to obtain the gear required
— 4 стр.
DIN 21341:1986-08
Отменен
Wooden mine guides
— 5 стр.