Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 267-19:1984-10

Отменен
Fasteners; technical delivery conditions; surface discontinuities on bolts and screws — 15 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 13-19:1999-11
Действует
ISO general purpose metric screw threads - Part 19: Nominal profiles — 3 стр.
DIN 267-13:2007-05
Действует
Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C — 12 стр.
DIN 267-24:2007-10
Действует
Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values — 6 стр.
DIN 267-5:1986-02
Отменен
Fasteners; technical delivery conditions; acceptance inspection; modified version of ISO 3269, 1984 edition — 8 стр.
DIN 4768-1 Beiblatt 1:1978-10
Отменен
Determination of roughnesse parameters R<(Index)a>, R<(Index)z>, R<(Index)max> by means of electrical stylus instruments; conversation of parameter R<(Index)a> to R<(Index)z> and vice versa — 2 стр.
DIN ISO 898-1:1989-01
Отменен
Mechanical properties of fasteners; bolts, screws and studs; identical with ISO 898-1:1988 — 17 стр.
DIN ISO 4759-1:1980-05
Отменен
Tolerances for fasteners - Part 1, bolts, screws and nuts with thread diameters <grцЯer => 1,6 <kleiner => 150 mm and product grades A, B and C — 18 стр.
DIN EN 26157-1:1991-12
Действует
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 — 12 стр.
DIN EN 26157-3:1991-12
Действует
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 — 16 стр.

На этот документ ссылаются

DIN 653:1986-09
Отменен
Knurled thin thumb screws — 4 стр.
DIN 926:1986-09
Отменен
Slotted set screws with full dog point — 4 стр.
DIN 605:1981-10
Отменен
Flat countersunk square neck bolts, with long square — 5 стр.
DIN 940:1983-03
Отменен
Studs; metal end <ca> 2,5 d — 4 стр.
DIN 267-5:1986-02
Отменен
Fasteners; technical delivery conditions; acceptance inspection; modified version of ISO 3269, 1984 edition — 8 стр.
DIN 927:1986-09
Отменен
Slotted shoulder screws — 3 стр.
DIN 553:1986-09
Отменен
Slotted set screws with cone point (modified version of ISO 7434, edition 1983) — 5 стр.
DIN 427:1986-09
Отменен
Slotted headless screws with chamfered end — 4 стр.
DIN 960:1983-12
Отменен
Hexagon bolts with M 8 Ч 1 to M 100 Ч 4 fine threads; product grades A and B — 8 стр.
DIN 920:1986-09
Отменен
Slotted pan head screws with small head — 4 стр.
DIN 961:1990-01
Отменен
M 8 Ч 1 to M 52 Ч 3 hexagon head bolts with fine pitch thread; product grades A and B — 6 стр.
DIN 933:1987-09
Отменен
M 1,6 to M 52 hexagon head screws threaded up to the head; product grades A and B — 9 стр.
DIN 964:1985-05
Отменен
Slotted raised countersunk (oval) head screws (with countersunk head as specified in ISO 2010-1972) — 6 стр.
DIN 267-1:1982-08
Отменен
Fasteners; Technical delivery conditions; General requirements — 3 стр.
DIN 964:1990-08
Отменен
Slotted raised countersunk head screws — 6 стр.
DIN 464:1986-09
Отменен
Knurled thumb screws — 4 стр.
DIN 961:1983-12
Отменен
Hexagon bolts with M 8 Ч 1 to M 52 Ч 3 fine threads; product grades A and B — 6 стр.
DIN 925:1986-09
Отменен
Slotted countersunk head screws with full dog point — 3 стр.
DIN 966:1984-12
Отменен
Cross recessed raised countersunk (oval) head screws — 4 стр.
DIN 604:1981-10
Отменен
Flat countersunk nib bolts — 4 стр.
DIN 603:1981-10
Отменен
Mushroom head square neck bolts — 5 стр.
DIN 438:1986-09
Отменен
Slotted set screws with cup point (modified version of ISO 7436, 1983 edition) — 4 стр.
DIN 609:1984-07
Отменен
Hexagon fit bolts with long threaded dog point — 8 стр.
DIN 976:1986-09
Отменен
Stud bolts — 5 стр.
DIN 931-1:1982-07
Отменен
Hexagon head bolts with shank; M 1,6 to M 39 screw threads; Product grades A and B, ISO 4014 modified — 8 стр.
DIN 933:1983-12
Отменен
M 1,6 to M 52 hexagon head screws with thread up to the head; product grades A and B (modified version of ISO 4017) — 10 стр.
DIN 966:1990-08
Отменен
Cross recessed raised countersunk head screws — 5 стр.
DIN 963:1990-08
Отменен
Slotted countersunk head screws — 6 стр.
DIN 85:1988-10
Отменен
Slotted pan head screws; product grade A — 5 стр.
DIN 267-5:1984-01
Отменен
Fasteners; technical delivery conditions; acceptance inspection — 9 стр.
DIN 965:1990-08
Отменен
Cross recessed countersunk flat head screws — 5 стр.
DIN 921:1986-09
Отменен
Slotted pan head screws with large head — 4 стр.
DIN 960:1990-01
Отменен
M 8 Ч 1 to M 100 Ч 4 hexagon head bolts with fine pitch tread; product grades A and B — 8 стр.
DIN 608:1981-10
Отменен
Flat countersunk square neck bolts, with short square — 4 стр.
DIN 975:1986-09
Отменен
Threaded rods (not intended for new designs) — 3 стр.
DIN 924:1986-09
Отменен
Slotted raised countersunk head screws with full dog point — 3 стр.
DIN 931-1:1987-09
Отменен
M 1,6 to M 39 hexagon head bolts; product grades A and B — 7 стр.
DIN 417:1986-09
Отменен
Slotted set screws with long dog point (modified version of ISO 7435, edition 1983) — 4 стр.
DIN 561:1985-02
Отменен
Hexagon head set screws with small hexagon and full dog point — 4 стр.
DIN 963:1985-04
Отменен
Slotted countersunk head screws (with countersunk heads as specified in ISO 2009-1972) — 6 стр.
DIN 444:1981-10
Отменен
Eyebolts — 5 стр.
DIN 85:1990-08
Отменен
Product grade A slotted pan head screws — 4 стр.
DIN 923:1986-09
Отменен
Slotted pan head screws with shoulder — 4 стр.
DIN 912:1983-12
Отменен
Hexagon socket head cap screws (modified version of ISO 4762) — 12 стр.
DIN 84:1990-08
Отменен
Product grade A slotted cheese head screws — 4 стр.
DIN 564:1985-02
Отменен
Hexagon head set screws with small hexagon and coned half dog point — 4 стр.
DIN 922:1986-09
Отменен
Slotted pan head screws with small head and full dog point — 4 стр.
DIN 404:1986-09
Отменен
Slotted capstan screws — 4 стр.
DIN 84:1988-10
Отменен
Slotted cheese head screws; product grade A — 5 стр.
DIN 610:1984-07
Отменен
Hexagon fit bolts with short threaded dog point — 8 стр.
DIN 965:1984-12
Отменен
Cross recessed countersunk flat head screws — 4 стр.
DIN 551:1986-09
Отменен
Slotted set screws with flat point (modified version of ISO 4766, edition 1983) — 5 стр.
DIN 607:1981-10
Отменен
Cup head nib bolts — 4 стр.
DIN 7984:1985-05
Отменен
Hexagon socket thin head cap screws — 6 стр.
DIN 7982:1990-08
Отменен
Cross recessed countersunk head tapping screws — 4 стр.
DIN 7972:1990-08
Отменен
Slotted countersunk head tapping screws — 3 стр.
DIN 6928:1990-11
Отменен
Hexagon washer head tapping screws — 2 стр.
DIN 6912:1985-05
Отменен
Hexagon socket thin head cap screws with pilot recess for wrench key — 7 стр.
DIN 6921:1983-06
Отменен
Hexagon flange bolts — 6 стр.
DIN 7972:1988-03
Отменен
Slotted countersunk (flat) head tapping screws — 3 стр.
DIN 6922:1983-06
Отменен
Hexagon flange bolts with reduced shank — 6 стр.
DIN 7973:1990-08
Отменен
Slotted raised countersunk head tapping screws — 3 стр.
DIN 7983:1990-08
Отменен
Cross recessed raised countersunk head tapping screws — 4 стр.
DIN 7976:1988-08
Отменен
Hexagon head tapping screws — 4 стр.
DIN 7985:1984-12
Отменен
Cross recessed raised cheese head screws — 5 стр.
DIN 7973:1988-03
Отменен
Slotted raised countersunk (oval) head tapping screws — 3 стр.
DIN 7981:1984-12
Отменен
Cross recessed pan head tapping screws — 4 стр.
DIN 7976:1990-08
Отменен
Hexagon head tapping screws — 3 стр.
DIN 7983:1984-12
Отменен
Cross recessed raised countersunk head tapping screws — 5 стр.
DIN 7971:1988-03
Отменен
Slotted pan head tapping screws — 3 стр.
DIN 7999:1983-12
Отменен
High strength hexagon fit bolts with large widths across flats for structural steel bolting — 5 стр.
DIN 7985:1990-08
Отменен
Cross recessed raised cheese head screws — 5 стр.
DIN 7985:1986-07
Отменен
Cross recessed raised cheese head screws — 5 стр.
DIN 7981:1990-08
Отменен
Cross recessed pan head tapping screws — 4 стр.
DIN 7964:1990-07
Отменен
Reduced shank bolts and screws with coarse thread — 6 стр.
DIN 7991:1986-01
Отменен
Hexagon socket countersunk head cap screws — 6 стр.
DIN 7982:1984-12
Отменен
Cross recessed raised countersunk head tapping screws — 5 стр.
DIN 7964:1988-03
Отменен
Bolts and screws with ISO metric thread and reduced shank — 6 стр.
DIN 7971:1990-08
Отменен
Slotted pan head tapping screws — 3 стр.
DIN 7991:1985-05
Отменен
Hexagon socket countersunk head screws — 6 стр.
DIN EN 26157-1:1991-12
Действует
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 — 12 стр.
DIN EN 26157-3:1991-12
Действует
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 — 16 стр.
DIN 70614:1989-12
Отменен
Automotive engineering; hexagon head screws with small widths across flats (not for new constructions) — 4 стр.
DIN 70613:1989-12
Отменен
Automotive engineering; hexagon head bolts with small widths across flats (not for new constructions) — 4 стр.
DIN 46266-2:1988-06
Действует
High-voltage feed-through terminals; bushing studs — 3 стр.
DIN 21547:1988-01
Отменен
Round head bolts with oval shoulder for mine supports — 2 стр.
DIN 2509:1986-09
Отменен
Double end studs — 4 стр.
DIN 479:1985-02
Отменен
Square head bolts with short dog point — 4 стр.
DIN 478:1985-02
Отменен
Square head bolts with collar — 4 стр.
DIN 480:1985-02
Отменен
Square head bolts with collar and oval half dog point — 4 стр.
DIN 444:1983-04
Отменен
Eyebolts — 5 стр.
DIN 267-2:1984-11
Отменен
Fasteners; technical delivery conditions; design and dimensional accuracy — 4 стр.