Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 254:1974-06

Отменен
Conical Tapers — 9 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 2079:1987-08
Действует
7/24 tapers for spindle noses for machine tools — 8 стр.
DIN 2353:1998-12
Отменен
Non-soldering compression fittings with cutting ring - Complete fittings and survey — 11 стр.
DIN 3861:2002-11
Отменен
Non-soldering compression fittings - Compression rings - Design — 5 стр.
DIN 1587:2000-10
Отменен
Hexagon domed cap nuts, high type — 5 стр.
DIN 2080-2:1979-09
Отменен
7/24 shanks for tools and clamping devices, form B — 2 стр.
DIN 3867:2003-08
Отменен
Non-soldering compression couplings - Pressure bush for butt joints — 4 стр.
DIN 3900:2001-06
Действует
Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread — 4 стр.
DIN 3914:1987-09
Отменен
Olive type compression couplings; male stud tees (stud run) — 4 стр.
DIN 3954:1984-04
Отменен
Solderless compression couplings with olive; male stud tee (stud run) assemblies — 3 стр.
DIN 477-1:1990-05
Отменен
Gas cylinder valves rated for test pressures up to 300 bar; types, sizes and outlets — 28 стр.
DIN 6341-2:1993-10
Действует
Draw-in collets; thread of the collets; nominal size, limit deviations — 5 стр.
DIN 6355:1980-01
Действует
Clamping Devices; Milling Machine Arbors with Taper — 3 стр.
DIN 6360:1983-05
Действует
Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive — 3 стр.
DIN 6363:1964-03
Отменен
Reduction Sleeves for Tools with 7/24 Taper — 2 стр.
DIN 6364:2000-12
Действует
Reduction sleeves with external taper shank 7/24 for morse taper shank with tightening thread — 5 стр.
DIN 64420-3:1976-04
Отменен
Cones, half angle of the cone 4° 20<Minute>, non perforated; cones, gauges — 3 стр.
DIN 7273-1:1970-07
Отменен
Knuckle Threads for Steel Sheet Pieces up to 0.5 mm Thickness and Appropriated Couplings; Dimensions, Tolerances — 2 стр.
DIN 7294:1972-01
Отменен
Axes — 2 стр.
DIN 7972:1990-08
Отменен
Slotted countersunk head tapping screws — 3 стр.
DIN 86140-1:1973-11
Отменен
Pipe unions with 25° taper bushings for brazing; type used for tubes of copper or copper alloy — 4 стр.
DIN 86143:1973-11
Отменен
Pipe unions with 25° taper bushings for brazing; screwed male screw piece for bulk heads — 1 стр.
DIN 86145:1973-11
Отменен
Pipe unions with 25° taper bushings butt welding; welded male screw piece for bulk heads — 1 стр.
DIN 86148:1972-02
Отменен
Pipe unions with 25° taper bushings for brazing or butt-welding; taper bushings, design and V-type-bore — 2 стр.
DIN 86149:1973-11
Отменен
Pipe unions with 25° taper bushings for brazing and butt welding; connection ends for taper bushings and nuts — 2 стр.
DIN 254:2000-10
Отменен
Geometrical product specifications (GPS) - Conical tapers — 9 стр.
DIN 25475-2:2009-05
Действует
Nuclear facilities - Operational monitoring - Part 2: Vibration monitoring for early detection of changes in the vibrational behavior of the primary coolant circuit in pressurized water reactors — 62 стр.

На этот документ ссылаются

DIN 254:2000-10
Отменен
Geometrical product specifications (GPS) - Conical tapers — 9 стр.
DIN 228-1:1987-05
Действует
Morse tapers and metric tapers; taper shanks — 6 стр.
DIN 228-1:1987-03
Отменен
Morse tapers and metric tapers; taper shanks — 6 стр.
DIN 204:1996-12
Действует
Hand reamers for morse tapers — 3 стр.
DIN 69871-1:1995-10
Отменен
Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media — 5 стр.
DIN ISO 3040:1991-09
Отменен
Technical drawings; dimensioning and tolerancing; cones; identical with ISO 3040:1990 — 6 стр.
DIN 2080-1:1978-12
Отменен
7/24 Taper Shanks for Tools and Clamping Devices, Type A — 3 стр.
DIN 2079:1987-08
Действует
7/24 tapers for spindle noses for machine tools — 8 стр.
DIN 3255-3:1976-12
Отменен
Manual taps for gas appliances for LPG camping cookers — 3 стр.
DIN 7178-4:1986-08
Отменен
System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; axial displacements — 5 стр.
DIN 3761-7:1984-01
Отменен
Rotary shaft lip type seals for automobils; test; skittle measuring mandrel — 3 стр.
DIN 1889-3:1989-04
Отменен
Tapered die-sinking cutters with parallel shank — 3 стр.
DIN 20030:1992-06
Действует
Hose fittings; straight-way-cock with grip; dimensions, materials, requirements — 4 стр.