Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 16263:1987-02

Отменен
Stopcocks for pressure gauges with locking socket and spigot connection and test connection for temperature range -20 to +50 Grad Celsius and rated pressure PN 25 — 3 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN ISO 228-1:2001-04
Отменен
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) — 6 стр.
DIN 13-6:1999-11
Действует
ISO general purpose metric screw threads - Part 6: Nominal sizes for 1,5 mm fine pitch threads; nominal diameter from 12 mm to 300 mm — 6 стр.
DIN 16255:1984-01
Отменен
Pressure gauges with an elastic measuring element; terms, selection, measuring arrangement, installation, operation — 8 стр.
DIN 16258:1987-02
Отменен
Sealing rings — 2 стр.
DIN 16283:2004-07
Действует
Adjusting nuts for pressure gauges and their accessories — 5 стр.
DIN 16287:2004-07
Действует
Caps for test connection on valves and cocks for pressure gauges — 6 стр.
DIN 16288:1987-02
Отменен
Shanks for connection and tapped holes for pressure gauges and pressure transducers — 5 стр.
DIN 17440:2001-03
Отменен
Stainless steels - Technical delivery conditions for drawn wire — 13 стр.
DIN 17660:1983-12
Отменен
Wrought copper alloys; copper-zinc alloys; (brass); (special brass); composition — 9 стр.
DIN 3230-3:1982-04
Отменен
Technical delivery conditions for valves - Compilation of test methods — 11 стр.
DIN 16263:1995-10
Отменен
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges — 4 стр.
DIN 16263:1962-08
Отменен
Stopcock for pressure gauges with lock socket and shank connection and with test connection, screw threads R<(hoch)1>/<(Index)2><Sekunde> or M 20 Ч 1,5; test connection shank screw thread M 20 Ч 1,5 — 1 стр.

На этот документ ссылаются

DIN 16263:1995-10
Отменен
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges — 4 стр.
DIN 16263:1962-08
Отменен
Stopcock for pressure gauges with lock socket and shank connection and with test connection, screw threads R<(hoch)1>/<(Index)2><Sekunde> or M 20 Ч 1,5; test connection shank screw thread M 20 Ч 1,5 — 1 стр.