Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994); German version EN ISO 527-1:1996— 9 стр.
Pipe joints and components of chlorinated poly(vinyl chloride) (PVC-C) for pipes under pressure - PVC-C 200 - Part 2: General quality requirements, testing— 16 стр.
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements; German version EN 14598-3:2005— 23 стр.
Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods; German version EN 14963:2006— 58 стр.
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements; German version EN 14598-2:2005— 18 стр.
Transportable refillable fully wrapped composite cylinders for Liquefied Petroleum Gases (LPG) - Design and Construction; German version EN 14427:2004— 53 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1872-2:1997 + A1:2000— 9 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997); German version EN ISO 1873-2:1997— 8 стр.
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:1997); German version EN ISO 527-5:1997— 9 стр.
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:1997 + AMD 1:2000) (includes Amendment A1:2000); German version EN ISO 1873-2:1997 + A1:2000— 9 стр.
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:1997); German version EN ISO 1872-2:1997— 8 стр.
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:1996); German version EN ISO 294-3:1998— 9 стр.
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009); German version EN ISO 527-5:2009— 19 стр.
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995); German version EN ISO 527-3:1995— 6 стр.
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr. 1:1994); German version EN ISO 527-2:1996— 8 стр.
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995); German version EN ISO 1874-2:1995— 9 стр.
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO/FDIS 527-5:2009); German version prEN ISO 527-5:2009— 19 стр.
Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006); German version EN ISO 22088-4:2006— 18 стр.
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011); German version EN ISO 21003-2:2008 + A1:2011— 30 стр.
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008); German version EN ISO 21003-2:2008— 28 стр.
Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009); English version EN ISO 23936-1:2009— 36 стр.
Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets; German version EN 1013-5:2000— 6 стр.
Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies (ISO 4587:1979, modified); German version EN 1465:1994— 5 стр.
Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets; German version EN 1013-4:2000— 6 стр.
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003— 10 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment; German version EN 13492:2004— 35 стр.
Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment— 38 стр.
Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements; German version EN 13473-2:2001— 6 стр.
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 12864:2001 + A1:2003 + A2:2005— 130 стр.
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butan, propane ot their mixtures; German version EN 13785:2005— 137 стр.
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens; German version EN 12814-7:2002— 9 стр.
Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures; German version EN 13491:2004— 34 стр.
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 12864:2001— 97 стр.
Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures; German version EN 12864:2001 + A1:2003— 122 стр.
Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:1996); German version EN ISO 7391-2:1999— 10 стр.
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003); German version EN ISO 7823-1:2003— 19 стр.
Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:1997); German version EN ISO 7792-2:2004— 15 стр.
Plastics - Poly(methyl methacrylate) sheets; types, dimensions and characteristics - Part 2: Melt-calendered extruded sheets (ISO 7823-2:1996); German version EN ISO 7823-2:1996— 10 стр.
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003); German version EN ISO 7823-2:2003— 20 стр.
Plastic - Poly(methyl methacrylate) sheet; Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1998); German version EN ISO 7823-1:2000— 13 стр.
Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2003); German version EN ISO 7823-3:2004— 18 стр.
Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:1991); German version EN ISO 7823-1:1996— 7 стр.
Plastics - Impact-resistant acrylonitrile/styrene (ASA, AES, ACS) moulding and extrusion materials, excluding butadiene-modified materials - Part 2: Preparation of test specimens and determination of properties (ISO 6402-2:1994); German version EN ISO 6402-2:1999— 10 стр.
Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000); German version EN ISO 3672-2:2001— 19 стр.
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties (ISO 3673-2:1999); German version EN ISO 3673-2:1999— 12 стр.
Plastics - Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4613-2:1995); German version EN ISO 4613-2:1995— 7 стр.
Plastics - Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:1994); German version EN ISO 2580-2:1999— 10 стр.
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2897-2:1994, including Technical Corrigendum 1:1995); German version EN ISO 2897-2:1999— 9 стр.
Plastics - Determination of resistance to environmental stress cracking (ESC) - Bent strip method (ISO 4599:1986); German version EN ISO 4599:1996— 9 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998); German version EN ISO 10350-1:2000— 17 стр.
Plastics - Methyl methacrylate/acrylonitrile/butadiene/styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 10366-2:1994); German version EN ISO 10366-2:1999— 11 стр.
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998); German version EN ISO 10724-2:2000— 11 стр.
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007); German version EN ISO 10350-1:2008— 16 стр.