Стандарт DIN EN ISO 13628-2:2006-10

ASTM D2857-95

Заменен

Standard Practice for Dilute Solution Viscosity of Polymers — 5 стр.

ASTM D2990-95

Заменен

Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics — 20 стр.

ASTM D4060-10

Заменен

Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser — 5 стр.

ASTM D5028-96

Заменен

Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis — 3 стр.

ASTM D6869-03

Заменен

Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water) — 4 стр.

ASTM C518-98

Заменен

Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus — 12 стр.

ASTM A751-96

Заменен

Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products — 5 стр.

ASTM C177-97

Заменен

Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus — 22 стр.

ASTM C335-95

Заменен

Standard Test Method for Steady-State Heat Transfer Properties of Horizontal Pipe Insulation — 11 стр.

ASTM A29/A29M-99e1

Заменен

Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, General Requirements for — 22 стр.

ASTM A388/A388M-95(2000)

Заменен

Standard Practice for Ultrasonic Examination of Heavy Steel Forgings — 7 стр.

ASTM A668/A668M-96e1

Заменен

Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use — 8 стр.

ASTM D2566

Заменен

Test Method for Linear Shrinkage of Cured Thermosetting Casting Resins During Cure (Withdrawn 1993) — 0 стр.

ASTM D5702-95

Заменен

Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals — 2 стр.

ASTM D6240-98

Заменен

Standard Tables of Body Measurements for Men Sizes Thirty-Four to Sixty (34 to 60) Regular — 6 стр.

ASTM D638M-96

Отменен

Standard Test Method for Tensile Properties of Plastics (Metric) (Withdrawn 1998) — 10 стр.

ASTM D6489-99

Заменен

Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating — 2 стр.

ASTM D664-95

Заменен

Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration — 7 стр.

ASTM D695M-91

Отменен

Test Method for Compressive Properties of Rigid Plastics (Metric) (Withdrawn 1996) — 7 стр.

ASTM D746-98e1

Заменен

Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact — 8 стр.

ASTM D789-98

Заменен

Standard Test Methods for Determination of Relative Viscosity and Moisture Content of Polyamide (PA) — 6 стр.

ASTM D790-00

Заменен

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials — 9 стр.

ASTM D792-98

Заменен

Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement — 6 стр.

ASTM D974-97

Заменен

Standard Test Method for Acid and Base Number by Color-Indicator Titration — 7 стр.

ASTM D1044-99

Заменен

Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion — 5 стр.

ASTM D1238-00

Заменен

Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer — 12 стр.

ASTM D1418-10

Заменен

Standard Practice for Rubber and Rubber Latices-Nomenclature — 3 стр.

ASTM D1505-98e1

Заменен

Standard Test Method for Density of Plastics by the Density-Gradient Technique — 7 стр.

ASTM D1525-00

Заменен

Standard Test Method for Vicat Softening Temperature of Plastics — 8 стр.

ASTM D1693-00

Заменен

Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics — 12 стр.

ASTM D2240-00

Заменен

Standard Test Method for Rubber Property—;Durometer Hardness — 9 стр.

ASTM D2583-95

Заменен

Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor — 4 стр.

ASTM E947-83(1996)e1

Заменен

Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis — 3 стр.

ASTM E1651-94(1999)

Заменен

Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry — 3 стр.

ASTM E328-86(1996)e1

Заменен

Standard Test Methods for Stress Relaxation Tests for Materials and Structures — 12 стр.

ASTM E384-10

Заменен

Standard Test Method for Microindentation Hardness of Materials — 42 стр.

ASTM E428-00

Заменен

Standard Practice for Fabrication and Control of Steel Reference Blocks Used in Ultrasonic Examination — 6 стр.

ASTM E709-95

Заменен

Standard Guide for Magnetic Particle Examination — 38 стр.

ASTM E831-00

Заменен

Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis — 5 стр.

ASTM E1269-99

Заменен

Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry — 6 стр.

ASTM E1356-98

Заменен

Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis — 4 стр.

ASTM G48-99A

Заменен

Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution — 9 стр.

DIN EN 287-1:2006-06

Отменен

Qualification test of welders - Fusion welding - Part 1: Steels; German version EN 287-1:2004 + A2:2006 — 45 стр.

DIN EN 288-1:1997-09

Отменен

Specification and approval of welding procedures for metallic materials - Part 1: General rules for fusion welding (including Amendment A1:1997); German version EN 288-1:1992 + A1:1997 — 9 стр.

DIN EN 288-2:1997-10

Отменен

Specification and approval of welding procedures for metallic materials - Part 2: Welding procedure specification for arc welding (includes Amendment A1:1997); German version EN 288-2:1992 + A1:1997 — 7 стр.

DIN EN 288-3:1997-10

Отменен

Specification and approval of welding procedures for metallic materials - Part 3: Welding procedure tests for the arc welding of steel (includes Amendment A1:1997); German version EN 288-3:1992 + A1:1997 — 27 стр.

DIN EN 10204:2005-01

Действует

Metallic products - Types of inspection documents; German version EN 10204:2004 — 11 стр.

DIN EN ISO 6224:2008-07

Отменен

Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2005); German version prEN 6224:2008

DIN EN ISO 75-1:2004-09

Отменен

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2004); German version EN ISO 75-1:2004 — 19 стр.

DIN EN ISO 75-2:2004-09

Отменен

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004); German version EN ISO 75-2:2004 — 18 стр.

DIN EN ISO 17864:2008-07

Действует

Corrosion of metals and alloys - Determination of the critical pitting temperature under potientiostatic control (ISO 17864:2005); German version EN ISO 17864:2008 — 20 стр.

DIN EN ISO 179-1:2006-05

Отменен

Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005 — 26 стр.

DIN EN ISO 179-2:2000-06

Отменен

Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999 — 14 стр.

DIN EN ISO 180:2007-04

Отменен

Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd.1:2006); German version EN ISO 180:2000 + A1:2006 — 19 стр.

DIN EN ISO 306:2004-10

Отменен

Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2004); German version EN ISO 306:2004 — 17 стр.

DIN EN ISO 307:2007-08

Отменен

Plastics - Polyamides - Determination of viscosity number (ISO 307:2007); German version EN ISO 307:2007 — 40 стр.

DIN EN ISO 527-1:1996-04

Отменен

Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1:1994); German version EN ISO 527-1:1996 — 9 стр.

DIN EN ISO 527-2:1996-07

Отменен

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993, including Corr. 1:1994); German version EN ISO 527-2:1996 — 8 стр.

DIN EN ISO 604:2003-12

Действует

Plastics - Determination of compressive properties (ISO 604:2002); German version EN ISO 604:2003 — 24 стр.

DIN EN ISO 868:2003-10

Действует

Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003); German version EN ISO 868:2003 — 12 стр.

DIN EN ISO 899-1:2003-10

Отменен

Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003); German version EN ISO 899-1:2003 — 20 стр.

BS ISO 974:2000

Действует

Plastics. Determination of the brittleness temperature by impact — 16 стр.

DIN EN ISO 1183-1:2004-05

Отменен

Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004); German version EN ISO 1183-1:2004 — 14 стр.

DIN EN ISO 1183-2:2004-10

Отменен

Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004); German version EN ISO 1183-2:2004 — 14 стр.

DIN EN ISO 1183-3:2000-05

Действует

Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); German version EN ISO 1183-3:1999 — 7 стр.

DIN ISO 3384:2008-07

Отменен

Rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression at ambient and at elevated temperatures (ISO 3384:2005) — 16 стр.

DIN EN ISO 6506-1:2006-03

Отменен

Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2005) — 25 стр.

DIN EN ISO 6507-1:2006-03

Отменен

Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005); German version EN ISO 6507-1:2005 — 29 стр.

DIN EN ISO 6508-1:2006-03

Отменен

Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005); German version EN ISO 6508-1:2005 — 35 стр.

DIN EN ISO 8692:2005-01

Отменен

Water quality - Freshwater algal growth inhibition test with unicellular green algae (ISO 8692:2004); German version EN ISO 8692:2004 — 24 стр.

DIN EN ISO 10423:2005-07

Отменен

Petroleum and natural gas industries - Drilling and production equipment - Wellhead and christmas tree equipment (ISO 10423:2003); English version EN ISO 10423:2004 — 412 стр.

DIN EN ISO 11357-1:1997-11

Отменен

Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:1997) — 9 стр.

BS ISO 11357-4:2005

Действует

Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity — 18 стр.

BS ISO 11359-2:1999

Действует

Plastics. Thermomechanical analysis (TMA). Determination of coefficient of linear thermal expansion and glass transition temperature — 18 стр.

DIN EN ISO 13628-3:2003-09

Действует

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems (ISO 13628-3:2000); German and English version EN ISO 13628-3:2000 — 142 стр.

DIN EN ISO 13628-4:1999-10

Отменен

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 4: Subsea wellhead and tree equipment (ISO 13628-4:1999); German version EN ISO 13628-4:1999 — 188 стр.

DIN EN ISO 13628-10:2007-01

Действует

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2005); English version EN ISO 13628-10:2006 — 79 стр.

DIN EN ISO 13628-11 Berichtigung 1:2009-09

Действует

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 11: Flexible pipe systems for subsea and marine applications (ISO 13628-11:2007); English version EN ISO 13628-11:2008, Corrigendum to DIN EN ISO 13628-11:2008-09; English version EN ISO 13628-11:2007/AC:2009 — 2 стр.

DIN EN ISO 15156-1:2009-06

Отменен

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO/FDIS 15156-1:2009); German version FprEN ISO 15156-1:2009

DIN EN ISO 15156-2:2009-06

Отменен

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO/FDIS 15156-2:2009); English version FprEN ISO 15156-2:2009

DIN EN ISO 15156-3:2009-06

Отменен

Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO/FDIS 15156-3:2009); English version FprEN ISO 15156-3:2009

DIN EN ISO 13628-2:2002-09

Отменен

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Flexible pipe systems for subsea and marine applications (ISO 13628-2:2000); German version EN ISO 13628-2:2000 (German and English text) — 111 стр.

DIN EN ISO 13628-2 Berichtigung 1:2009-09

Действует

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 2: Unbonded flexible pipe systems for subsea and marine applications (ISO 13628-2:2006); English version EN ISO 13628-2:2006, Corrigendum to DIN EN ISO 13628-2:2006-10; English version EN ISO 13628-2:2006/AC:2009 — 3 стр.

Каталог стандартов

DIN EN ISO 13628-2:2006-10

Ссылочные документы

На этот документ ссылаются