Каталог стандартов

+7 (495) 223-46-76 +7 (812) 309-78-59
inform@normdocs.ru
О компании Стандарты Контакты Заказать стандарт
СтандартыDIN

DIN 4000-95:1998-04

Отменен
Tabular layout of article characteristics - Part 95: Tool interface coding — 6 стр.
ОписаниеИзмененияСсылкиВерсии

Ссылочные документы

DIN 10:1997-06
Отменен
Driving squares for rotating tools with parallel shanks — 3 стр.
DIN 138:1955-09
Отменен
Metal-cutting Tools; Bores, Keyways and Driving Features for Tools with Parallel Bore and with 1 in 30 Taper Bore — 4 стр.
DIN 228-1:1987-05
Действует
Morse tapers and metric tapers; taper shanks — 6 стр.
DIN 228-2:1987-03
Действует
Morse tapers and metric tapers; taper sockets — 5 стр.
DIN 238-1:1962-06
Отменен
Drill Chuck Mounting Arrangements; Taper Arbors — 1 стр.
DIN 238-2:1967-03
Отменен
Drill Chuck Mounting Arrangements; Drill Chuck Tapers — 2 стр.
DIN 1806:1964-06
Отменен
Taper Shanks for Cotter Retention
DIN 18095-3:1999-06
Действует
Smoke control shutters - Part 3: Application of test results — 5 стр.
DIN 1835-1:1999-01
Действует
Parallel shanks for milling cutters - Part 1: Dimensions — 6 стр.
DIN 2079:1987-08
Действует
7/24 tapers for spindle noses for machine tools — 8 стр.
DIN 2080-1:1978-12
Отменен
7/24 Taper Shanks for Tools and Clamping Devices, Type A — 3 стр.
DIN 2080-2:1979-09
Отменен
7/24 shanks for tools and clamping devices, form B — 2 стр.
DIN 4000-1:1992-09
Отменен
Object parameter list; concepts and principles — 16 стр.
DIN 4000-22:1998-04
Отменен
Tabular layout of article characteristics - Part 22: Cutting tools with geometrically determinated edges — 9 стр.
DIN 4000-45:1998-04
Отменен
Tabular layout of article characteristics - Part 45: Adaptors and holders for tools — 12 стр.
DIN 4000-72:1998-04
Отменен
Tabular layout of article characteristics - Part 72: Adaptors with cylindrical fixtures for tools — 3 стр.
DIN 4000-73:1998-04
Отменен
Tabular layout of article characteristics - Part 73: Adaptors with tapered fixtures for tools — 3 стр.
DIN 4000-76:1998-04
Отменен
Tabular layout of article characteristics - Part 76: Inserts, indexable — 8 стр.
DIN 4000-77:1998-04
Отменен
Tabular layout of article characteristics - Part 77: Inserts, clamped for thread cutting — 11 стр.
DIN 4000-78:1998-04
Отменен
Tabular layout of article characteristics - Part 78: Tips, brazed — 3 стр.
DIN 4000-80:1998-04
Отменен
Tabular layout of article characteristics - Part 80: Screwing tabs, cold forming taps and screwing dies — 6 стр.
DIN 4000-81:1998-04
Отменен
Tabular layout of article characteristics - Part 81: Drills, counter sinking and reaming tools with non indexable cutting edges — 7 стр.
DIN 4000-82:1998-04
Отменен
Tabular layout of article characteristics - Part 82: End mills with non indexable cutting edges — 6 стр.
DIN 4000-83:1998-04
Отменен
Tabular layout of article characteristics - Part 83: Milling cutter with arbor hole and non indexable cutting edges — 6 стр.
DIN 4000-86:1998-04
Отменен
Tabular layout of article characteristics - Part 86: Drills, counter sinking and reaming tools with indexable inserts — 6 стр.
DIN 4000-87:1998-04
Отменен
Tabular layout of article characteristics - Part 87: End mills with indexable inserts — 6 стр.
DIN 4000-88:1998-04
Отменен
Tabular layout of article characteristics - Part 88: Milling cutter and arbor hole for indexable inserts — 6 стр.
DIN 4000-89:1998-04
Отменен
Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.
DIN 4000-90:1998-04
Отменен
Tabular layout of article characteristics - Part 90: Tools holders with indexable insert edges — 8 стр.
DIN 4000-91:1998-04
Отменен
Tabular layout of article characteristics - Part 91: Intermediates — 3 стр.
DIN 4000-92:1998-04
Отменен
Tabular layout of article characteristics - Part 92: Non-rotating tool adaptors — 6 стр.
DIN 4000-93:1998-04
Отменен
Tabular layout of article characteristics - Part 93: Collets — 4 стр.
DIN 4000-94:1998-04
Отменен
Tabular layout of article characteristics - Part 94: Quick change inserts — 3 стр.
DIN 4000-97:1998-04
Отменен
Tabular layout of article characteristics - Part 97: Tool holders with n numbers of edge fixture of tools — 2 стр.
DIN 4984-1:1987-06
Отменен
Tool holders with rectangular shank; for indexable inserts; general survey; correlation of dimensions — 9 стр.
DIN 4984-2:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style A — 6 стр.
DIN 4984-3:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style B — 6 стр.
DIN 4984-4:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style D — 4 стр.
DIN 4984-5:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style F — 6 стр.
DIN 4984-6:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style G — 6 стр.
DIN 4984-7:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style J — 6 стр.
DIN 4984-8:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style K — 6 стр.
DIN 4984-9:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style L — 4 стр.
DIN 4984-10:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style N — 6 стр.
DIN 4984-11:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style R — 5 стр.
DIN 4984-12:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style S — 6 стр.
DIN 4984-13:1987-06
Отменен
Tool holders with rectangular shank, for indexable inserts; style T — 4 стр.
DIN 4984-14:1987-06
Отменен
Tool holders with rectangular shank for indexable inserts; style H — 4 стр.
DIN 6327-1:1985-06
Действует
Adjustable adaptors for tools with morse taper shanks, short types — 4 стр.
DIN 6327-2:1985-06
Действует
Adjustable adaptors for tools with morse taper shanks, long types — 4 стр.
DIN 6327-3:1985-06
Действует
Adjustable adaptors for tools with morse taper shanks, stepped types — 4 стр.
DIN 6327-4:1981-08
Действует
Adjustable adaptors for tools with morse taper shanks; adjustment nuts for adaptors — 3 стр.
DIN 6388:1993-02
Отменен
Collets for tool holder with taper ratio 1 : 10; collets, holder, nuts — 8 стр.
DIN 6499:1993-02
Отменен
Collets with 8° setting angle for tool shanks; collets, nuts and fitting dimensions
DIN 6535:1992-02
Действует
Parallel shanks for hardmetal twist drills and end mills; dimensions — 4 стр.
DIN 8025-1:1993-11
Отменен
Tool holders for internal turning, with cylindrical shank, for indexable inserts; general survey, correlation of dimensions, calculation for corrections — 6 стр.
DIN 8030-1:1984-01
Действует
Face milling cutters for indexable inserts — 7 стр.
DIN 55027:1980-03
Отменен
Machine Tools; Spindle Noses with Centering Taper, Face Plate and Bayonet Type Fastening, Accessories; Dimensions — 6 стр.
DIN 69871-1:1995-10
Отменен
Tool shanks with 7/24 taper for automatic tool exchange - Part 1: Type A, type AD, type B and with data media — 5 стр.
DIN 69880-1:1994-08
Отменен
Tool holders with parallel shank - Part 1: Parallel shank, location hole; technical delivery conditions — 5 стр.
DIN 69881-1:1987-09
Действует
Tool holders with prism; prism, prism location; technical delivery conditions — 3 стр.
DIN 69882-2:1997-10
Отменен
Tool holder with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive; dimensions — 4 стр.
DIN 69882-3:1997-10
Отменен
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive; dimensions — 3 стр.
DIN 69882-4:1997-10
Отменен
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for paralled shanks with lateral driving surface; dimensions — 4 стр.
DIN 69882-5:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions — 8 стр.
DIN 69882-6:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions — 7 стр.
DIN 69893-1:1996-01
Отменен
Hollow taper shanks with flat contact surface - Part 1: Hollow taper shanks type A and type C; dimensions — 7 стр.
DIN 69893-2:1996-01
Отменен
Hollow taper shanks with flat contact surface - Part 2: Hollow taper shanks type B and type D; dimensions — 6 стр.
DIN 4000-95:2007-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 37 стр.
DIN 4000-95 Beiblatt 1:2007-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices, explanatory information relating to company codes for specific interfaces — 19 стр.

На этот документ ссылаются

DIN 69882-1:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 1: Designation system, technical delivery conditions — 5 стр.
DIN 69882-8:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 8: Type G, shrink chuck - Dimensions — 10 стр.
DIN 69882-6:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E, clamping chuck for collets with 8° setting angle - Dimensions — 7 стр.
DIN 69882-5:1999-01
Отменен
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D; Holders for parallel shanks with inclined clamping surface; Dimensions — 6 стр.
DIN 69882-7:2002-04
Отменен
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck; Dimensions — 11 стр.
DIN 69882-7:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 7: Type F, expansion clamping chuck - Dimensions — 12 стр.
DIN 69882-3:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 3: Type B, milling machine arbors with enlarged contact surface diameter for milling cutters with parallel key drive - Dimensions — 6 стр.
DIN 69882-6:2000-07
Отменен
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 6: Type E; clamping chuck for collets with 8° setting angle; dimensions — 4 стр.
DIN 69882-2:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 2: Type A, milling cutters with tenon and parallel key drive - Dimensions — 7 стр.
DIN 69882-4:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 4: Type C, holding fixture for parallel shanks with lateral driving surface - Dimensions — 7 стр.
DIN 69882-5:2005-06
Действует
Tool holders with hollow taper shanks according to DIN 69893-1 - Part 5: Type D, holders for parallel shanks with inclined clamping surface - Dimensions — 8 стр.
DIN 4000-93:2006-08
Отменен
Tabular layouts of properties - Part 93: Collets, Clamping sleeves, Ferrules — 12 стр.
DIN 4000-78:2006-08
Отменен
Tabular layouts of properties - Part 78: Tips, brazed — 9 стр.
DIN 4000-86:2006-08
Отменен
Tabular layouts of properties - Part 86: Drills and counter sinking tools for indexable inserts — 19 стр.
DIN 4000-22:1998-04
Отменен
Tabular layout of article characteristics - Part 22: Cutting tools with geometrically determinated edges — 9 стр.
DIN 4000-93:1998-04
Отменен
Tabular layout of article characteristics - Part 93: Collets — 4 стр.
DIN 4000-95 Beiblatt 1:1998-04
Отменен
Tabular layout of article characteristics - Part 95: Tool interface coding; Appendix, companies code for specific interface — 4 стр.
DIN 4000-95:2007-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 37 стр.
DIN 4000-88:2005-01
Отменен
Tabular layouts of properties - Part 88: Milling cutter with arbor hole for indexable inserts — 15 стр.
DIN 4000-130:2003-10
Отменен
Tabular layout of article characteristics - Part 130: Abrasive pencils and abrasive wheels with thread inserts — 14 стр.
DIN 4000-128:2003-10
Отменен
Tabular layout of article characteristics - Part 128: Bonded abrasive products with bore or threaded insert — 20 стр.
DIN 4000-131:2003-10
Отменен
Tabular layout of article characteristics - Part 131: Abrasive products on base — 16 стр.
DIN 4000-89:1998-04
Отменен
Tabular layout of article characteristics - Part 89: Rotating tool adaptors — 5 стр.
DIN 4000-83:2005-01
Отменен
Tabular layouts of properties - Part 83: Milling cutter with arbore and non indexable cutting edges — 16 стр.
DIN 4000-86:1998-04
Отменен
Tabular layout of article characteristics - Part 86: Drills, counter sinking and reaming tools with indexable inserts — 6 стр.
DIN 4000-129:2003-10
Отменен
Tabular layout of article characteristics - Part 129: Bonded abrasive segments, honing tools, abrasive bars and grindstones — 11 стр.
DIN 4000-92:1998-04
Отменен
Tabular layout of article characteristics - Part 92: Non-rotating tool adaptors — 6 стр.
DIN 4000-88:1998-04
Отменен
Tabular layout of article characteristics - Part 88: Milling cutter and arbor hole for indexable inserts — 6 стр.
DIN 4000-81:2004-04
Отменен
Tabular layout of product properties - Part 81: Drills and counter sinking tools with non indexable cutting edges — 20 стр.
DIN 4000-76:2004-03
Отменен
Tabular layout of product properties - Part 76: Inserts, indexable — 16 стр.
DIN 4000-76:2006-08
Отменен
Tabular layouts of properties - Part 76: Inserts, indexable — 15 стр.
DIN 4000-77:1998-04
Отменен
Tabular layout of article characteristics - Part 77: Inserts, clamped for thread cutting — 11 стр.
DIN 4000-90:1998-04
Отменен
Tabular layout of article characteristics - Part 90: Tools holders with indexable insert edges — 8 стр.
DIN 4000-87:1998-04
Отменен
Tabular layout of article characteristics - Part 87: End mills with indexable inserts — 6 стр.
DIN 4000-94:1998-04
Отменен
Tabular layout of article characteristics - Part 94: Quick change inserts — 3 стр.
DIN 4000-91:1998-04
Отменен
Tabular layout of article characteristics - Part 91: Intermediates — 3 стр.
DIN 4000-81:1998-04
Отменен
Tabular layout of article characteristics - Part 81: Drills, counter sinking and reaming tools with non indexable cutting edges — 7 стр.
DIN 4000-77:2004-03
Отменен
Tabular layout of product properties - Part 77: Inserts, clamped for thread cutting — 19 стр.
DIN 4000-76:1998-04
Отменен
Tabular layout of article characteristics - Part 76: Inserts, indexable — 8 стр.
DIN 4000-80:2005-01
Отменен
Tabular layouts of properties - Part 80: Screwing tabs, cold forming taps and screwing dies — 14 стр.
DIN 4000-82:1998-04
Отменен
Tabular layout of article characteristics - Part 82: End mills with non indexable cutting edges — 6 стр.
DIN 4000-81:2006-08
Отменен
Tabular layouts of properties - Part 81: Drills and counter sinking tools with non-indexable cutting edges — 22 стр.
DIN 4000-78:1998-04
Отменен
Tabular layout of article characteristics - Part 78: Tips, brazed — 3 стр.
DIN 4000-83:1998-04
Отменен
Tabular layout of article characteristics - Part 83: Milling cutter with arbor hole and non indexable cutting edges — 6 стр.
DIN 4000-80:1998-04
Отменен
Tabular layout of article characteristics - Part 80: Screwing tabs, cold forming taps and screwing dies — 6 стр.
DIN 4000-95:2013-11
Отменен
Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices — 74 стр.